Impinging jet surface cooling is being used in many industrial and engineering applications due to their higher heat removal rate. Jet impingement is one of the methods to cool hot surfaces, especially in textile, metal and electronic industries. Due to high heat removal rate the jet impingement cooling of the hot surfaces is being used in nuclear industries. During the loss of coolant accidents (LOCA) in nuclear power plant, an emergency core cooling system (ECCS) cool the cluster of clad tubes using consisting of fuel rods. The usual water flow within a reactor core is bottom to top, parallel to the fuel rods. When a hot surface quenched at very high temperature using a jet of cold fluid, during the quenching the initial heat transfer is limited by film boiling. The effective cooling takes place only after the surface temperature is below the leidenfrost temperature.
In the present work an experimental investigation has been carried out to analyze the rewetting phenomenon of a hot vertical stainless steel foil by circular impinging jets of pure water and Al2O3–water nanofluids. The rewetting time and rewetting velocity in the form of dimensionless number (Peclet number) obtained from the thermal images obtained from infrared thermal imaging camera (A655sc, FLIR System). Experiments are performed for different Reynolds number (Re = 5000, 8000), and Al2O3–water nanofluids concentration (Φ = 0.15%, 0.6%)
EXPERIMENTAL INVESTIGATION OF THE SELF-LIMITATION OF POWER DURING REACTIVITY TRANSIENTS IN A SUBCOOLED, WATER-MODERATED REACTOR. Borax-I Experiments, 1954
