Effective Equations for Sound and Void Wave Propagation in Bubbly Fluids

2003 ◽  
Vol 63 (6) ◽  
pp. 1849-1888 ◽  
Author(s):  
Nianqing Wang ◽  
Peter Smereka
2006 ◽  
Vol 129 (5) ◽  
pp. 595-604 ◽  
Author(s):  
Tianshi Lu ◽  
Roman Samulyak ◽  
James Glimm

The direct numerical simulation (DNS) method has been used to the study of the linear and shock wave propagation in bubbly fluids and the estimation of the efficiency of the cavitation mitigation in the container of the Spallation Neutron Source liquid mercury target. The DNS method for bubbly flows is based on the front tracking technique developed for free surface flows. Our front tracking hydrodynamic simulation code FronTier is capable of tracking and resolving topological changes of a large number of interfaces in two- and three-dimensional spaces. Both the bubbles and the fluid are compressible. In the application to the cavitation mitigation by bubble injection in the SNS, the collapse pressure of cavitation bubbles was calculated by solving the Keller equation with the liquid pressure obtained from the DNS of the bubbly flows. Simulations of the propagation of linear and shock waves in bubbly fluids have been performed, and a good agreement with theoretical predictions and experiments has been achieved. The validated DNS method for bubbly flows has been applied to the cavitation mitigation estimation in the SNS. The pressure wave propagation in the pure and the bubbly mercury has been simulated, and the collapse pressure of cavitation bubbles has been calculated. The efficiency of the cavitation mitigation by bubble injection has been estimated. The DNS method for bubbly flows has been validated through comparison of simulations with theory and experiments. The use of layers of nondissolvable gas bubbles as a pressure mitigation technique to reduce the cavitation erosion has been confirmed.


2002 ◽  
Vol 454 ◽  
pp. 287-325 ◽  
Author(s):  
PETER SMEREKA

The derivation of effective equations for pressure wave propagation in a bubbly fluid at very low void fractions is examined. A Vlasov-type equation is derived for the probability distribution of the bubbles in phase space instead of computing effective equations in terms of averaged quantities. This provides a more general description of the bubble mixture and contains previously derived effective equations as a special case. This Vlasov equation allows for the possibility that locally bubbles may oscillate with different phases or amplitudes or may have different sizes. The linearization of this equation recovers the dispersion relation derived by Carstensen & Foldy. The initial value problem is examined for both ideal bubbly flows and situations where the bubble dynamics have damping mechanisms. In the ideal case, it is found that the pressure waves will damp to zero whereas the bubbles continue to oscillate but with the oscillations becoming incoherent. This damping mechanism is similar to Landau damping in plasmas. Nonlinear effects are considered by using the Hamiltonian structure. It is proven that there is a damping mechanism due to the nonlinearity of single-bubble motion. The Vlasov equation is modified to include effects of liquid viscosity and heat transfer. It is shown that the pressure waves have two damping mechanisms, one from the effects of size distribution and the other from single-bubble damping effects. Consequently, the pressure waves can damp faster than bubble oscillations.


Author(s):  
J. M. Galbraith ◽  
L. E. Murr ◽  
A. L. Stevens

Uniaxial compression tests and hydrostatic tests at pressures up to 27 kbars have been performed to determine operating slip systems in single crystal and polycrystal1ine beryllium. A recent study has been made of wave propagation in single crystal beryllium by shock loading to selectively activate various slip systems, and this has been followed by a study of wave propagation and spallation in textured, polycrystal1ine beryllium. An alteration in the X-ray diffraction pattern has been noted after shock loading, but this alteration has not yet been correlated with any structural change occurring during shock loading of polycrystal1ine beryllium.This study is being conducted in an effort to characterize the effects of shock loading on textured, polycrystal1ine beryllium. Samples were fabricated from a billet of Kawecki-Berylco hot pressed HP-10 beryllium.


2012 ◽  
Author(s):  
Bruno Moreira ◽  
Mauricio Kischinhevsky ◽  
Marcelo Zamith ◽  
Esteban Clua ◽  
Diego Brandao

Sign in / Sign up

Export Citation Format

Share Document