Densities and kinematic viscosities of tetra-n-butylammonium iodide–nickel(II) chloride melts

1979 ◽  
Vol 57 (2) ◽  
pp. 147-150
Author(s):  
Nurul Islam ◽  
Abdul Maroof ◽  
Ismail Kochi

Densities and kinematic viscosities of molten mixtures of nickel(II) chloride in tetra-n-butylammonium iodide have been measured as functions of temperature and composition. The data on the kinematic viscosity have been analyzed using both Arrhenius and non-Arrhenius type equations. The heat of activation, the entropy of activation, and the free energy of activation for viscous flow have been computed. At higher concentrations a slight tendency towards non-Arrhenius viscous behaviour is observed. The free energy of activation helps in describing the overall composition dependence of kinematic viscosity.

1959 ◽  
Vol 37 (1) ◽  
pp. 138-147 ◽  
Author(s):  
Keith J. Laidler

A theoretical treatment has been developed for the rates of electron-transfer reactions in aqueous solution, with particular reference to the ferric–ferrous system. The reactions are considered to be diffusion-controlled processes, the approach of the ions being hindered by the electrostatic repulsion between them. Calculations have been made of the free energy of the diffusion process and for the repulsion, account being taken of the variation in dielectric constant with the electric field. The form of the potential-energy barrier between the ions is calculated for various separations, and the transmission coefficient calculated using the quantum-mechanical expression corresponding to a rectangular barrier. The total free energy of activation for the reaction, which is the sum of the contributions due to diffusion, repulsion, and tunnelling, is found to pass through a minimum at a separation of about 4 Å. The calculated free energy of activation for the reaction is 15.4 kcal, in good agreement with the experimental value of 16.8 kcal. The energy and entropy of activation for the reaction are also briefly discussed.


Fluids ◽  
2020 ◽  
Vol 5 (1) ◽  
pp. 13 ◽  
Author(s):  
Sumudu S. Karunarathne ◽  
Dag A. Eimer ◽  
Lars E. Øi

Densities and viscosities of aqueous monoethanol amine (MEA) and CO2-loaded aqueous MEA are highly relevant in engineering calculations to perform process design and simulations. Density and viscosity of the aqueous MEA were measured in the temperature range of 293.15 K to 363.15 K with MEA mass fractions ranging from 0.3 to 1.0. Densities of the aqueous MEA were fitted for a density correlation. Eyring’s viscosity model based on absolute rate theory was adopted to determine the excess free energy of activation for viscous flow of aqueous MEA mixtures and was correlated by a Redlich–Kister polynomial. Densities and viscosities of CO2-loaded MEA solutions were measured in the temperature range of 293.15 K to 353.15 K with MEA mass fractions of 0.3, 0.4 and 0.5. The density correlation used to correlate aqueous MEA was modified to fit CO2-loaded density data. The free energy of activation for viscous flow for CO2-loaded aqueous MEA solutions was determined by Eyring’s viscosity model and a correlation was proposed to represent free energy of activation for viscous flow and viscosity. This can be used to evaluate quantitative and qualitative properties in the MEA + H2O + CO2 mixture.


The spontaneous and Ag+-induced aquation reactions of Co(NH 3 ) 5 Br 2 + were examined in the presence of polyelectrolytes and at high pressures. The aquation reactions were enhanced by addition of anionic polyelectrolytes, i.e. sodium polyethylenesulphonate and sodium polystyrenesulphonate. The polyelectrolyte-accelerated reactions were retarded at elevated pressures. The volumes of activation, ΔT≠, were negative in the absence of the macro-ions and positive in their presence for both aquations. The results indicate that the activated complex is dehydrated by the macro-ions to a much larger extent than the reactants. Correspondingly, the entropy of activation was increased by addition of the macro-ions, causing a decrease in the free energy of activation. The dehydration of the activated complex is thus considered to be one of the important factors of polyelectrolyte ‘catalysis’. The implications of these findings are discussed.


2008 ◽  
Vol 59 (1) ◽  
pp. 45-48
Author(s):  
Oana Ciocirlan ◽  
Olga Iulian

This paper reports the viscosities measurements for the binary system dimethyl sulfoxide + 1,4-dimethylbenzene over the entire range of mole fraction at 298.15, 303.15, 313.15 and 323.15 K and atmospheric pressure. The experimental viscosities were correlated with the equations of Grunberg-Nissan, Katti-Chaudhri, Hind, Soliman and McAllister; the adjustable binary parameters have been obtained. The excess Gibbs energy of activation of viscous flow (G*E) has been calculated from the experimental measurements and the results were fitted to Redlich-Kister polynomial equation. The obtained negative excess Gibbs free energy of activation and negative Grunberg-Nissan interaction parameter are discussed in structural and interactional terms.


1980 ◽  
Vol 58 (17) ◽  
pp. 1821-1828 ◽  
Author(s):  
Gary D. Fallon ◽  
Bryan M. Gatehouse ◽  
Allan Pring ◽  
Ian D. Rae ◽  
Josephine A. Weigold

Ethyl-3-amino-2-benzoyl-2-butenoate crystallizes from pentane as either the E (mp 82–84 °C) or the Z-isomer (mp 95.5–96.5 °C). The E isomer is less stable, and changes spontaneously into the Z, which bas been identified by X-ray crystallography. The structure is characterised by an N–H/ester CO hydrogen bond and a very long C2—C3 bond (1.39 Å). Nuclear magnetic resonance methods have been used to measure the rate of [Formula: see text] isomerization at several temperatures, leading to the estimate that the free energy of activation at 268 K is 56 ± 8 kJ.


Sign in / Sign up

Export Citation Format

Share Document