Exploratory analysis of the variables affecting initial attack hot-spotting containment rate

1991 ◽  
Vol 21 (4) ◽  
pp. 540-544 ◽  
Author(s):  
Peter J. Murphy ◽  
Paul M. Woodard ◽  
Dennis Quintilio ◽  
Stephen J. Titus

Hot-spotting containment rates were determined for 18 fires of various intensities in two common boreal forest cover types: 8 in jack pine (Pinusbanksiana Lamb.) and 10 in black spruce (Piceamariana (Mill.) B.S.P.). Hot-spotting containment rates did not differ significantly between the two cover types. Correlation coefficients showed that hot-spotting containment rates were more closely related to fire behavior than to weather variables measured as part of the Canadian Forest Fire Weather Index System. Hot-spotting containment rate (HCR; m/man-hour) may be predicted based on rate of spread (ROS; m/min) and flame length (FL; m) using the following model: HCR = exp(6.0140 – 0.1830ROS – 0.1201FL). This model was fitted using weighted nonlinear regression; the R2-value was 0.76.

Fire Ecology ◽  
2019 ◽  
Vol 15 (1) ◽  
Author(s):  
Stacy A. Drury

Abstract Background Fire managers tasked with assessing the hazard and risk of wildfire in Alaska, USA, tend to have more confidence in fire behavior prediction modeling systems developed in Canada than similar systems developed in the US. In 1992, Canadian fire behavior systems were adopted for modeling fire hazard and risk in Alaska and are used by fire suppression specialists and fire planners working within the state. However, as new US-based fire behavior modeling tools are developed, Alaskan fire managers are encouraged to adopt the use of US-based systems. Few studies exist in the scientific literature that inform fire managers as to the efficacy of fire behavior modeling tools in Alaska. In this study, I provide information to aid fire managers when tasked with deciding which system for modeling fire behavior is most appropriate for their use. On the Magitchlie Creek Fire in Alaska, I systematically collected fire behavior characteristics within a black spruce (Picea mariana [Mill.] Britton, Sterns & Poggenb.) ecosystem under head fire conditions. I compared my fire behavior observations including flame length, rate of spread, and head fire intensity with fire behavior predictions from the US fire modeling system BehavePlus, and three Canadian systems: RedAPP, CanFIRE, and the Crown Fire Initiation and Spread system (CFIS). Results All four modeling systems produced reasonable rate of spread predictions although the Canadian systems provided predictions slightly closer to the observed fire behavior. The Canadian fire behavior prediction modeling systems RedAPP and CanFIRE provided more accurate predictions of head fire intensity and fire type than BehavePlus or CFIS. Conclusions The most appropriate fire behavior modeling system for use in Alaskan black spruce ecosystems depends on what type of questions are being asked. For determining the rate of fire movement across a landscape, REDapp, CanFIRE, CFIS, or BehavePlus can all be expected to provide reasonably accurate estimates of rate of spread. If fire managers are interested in using predicted flame length or energy produced for informing decisions such as which firefighting tactics will be successful, or for evaluating the ecological impacts due to burning, then the Canadian fire modeling systems outperformed BehavePlus in this case study.


1989 ◽  
Vol 65 (3) ◽  
pp. 190-193 ◽  
Author(s):  
Peter J. Murphy ◽  
Dennis Quintilio ◽  
Paul M. Woodard

Production of hand-constructed fireline was simulated in 32 forest cover types and three slash fuel types in the boreal forest of northern Alberta. A total of 47 double trials were conducted in these 35 fuel types. The first trial simulated an initial attack situation, and the second a sustained attack situation. The results were used to test the validity of the fireline production index developed by Murphy and Quintilio (1978). Correlation coefficients between predicted and measured fireline production rates were 0.93 for initial attack simulations and 0.95 for sustained attack simulations. However, the predicted rates were consistently lower than observed rates, largely because of the methodologies used in classifying resistance categories, and the "over-achieving" syndrome common to participants in behavioral studies. We conclude the index is useful in providing consistent and desirably conservative estimates of handline production rates. These estimates could be adapted for operational application in other regions if they are verified for local conditions. Predictions will be further strengthened if based on data collected from actual fires rather than simulation tests.


1986 ◽  
Vol 16 (6) ◽  
pp. 1293-1300 ◽  
Author(s):  
Ralph M. Nelson Jr. ◽  
Carl W. Adkins

Twenty-two fires in a laboratory wind tunnel and 8 field fires were studied with video techniques to determine relationships between their flame characteristics and fire behavior. The laboratory fires were in pine needle fuel beds with and without an overlying stratum of live vegetation. These fuels simulated 2-year roughs in southeastern fuel types. The field bums were in 1- and 2-year roughs in similar fuels. Byram's fire intensity ranged from 98 to 590 kW/m in the laboratory, and from 355 to 2755 kW/m in the field. Flame lengths were proportional to the square root of fire intensity when fuel consumption exceeded 0.5 kg/m2, in agreement with predictions from buoyant flame theory. However, for burns in the needle layer (consumption approximately 0.5 kg/m2), flame lengths were constant at about 0.5 m, regardless of intensity. Similar values were observed on two of the field fires. It is speculated that flame length is limited by a boundary layer pattern for the overall flow, even though the flames themselves did not exhibit boundary layer characteristics. Also, laboratory correlations of flame tilt angle and fire intensity with other fire and weather variables depart from buoyant flame theory. Further study under field conditions is needed before relationships involving flame tilt angle, fire intensity, and wind speed should be used in practical applications.


1998 ◽  
Vol 8 (4) ◽  
pp. 217 ◽  
Author(s):  
MD Flannigan ◽  
BM Wotton ◽  
S Ziga

In Canada, many fire management agencies interpolate indexes of the Fire Weather Index System to estimate the fire danger between weather stations. Difficulties with interpolation arise because summer precipitation can be highly variable over short distances. This variability hinders the usefulness of interpolating precipitation, which is one of the inputs for the Fire Weather Index System. Precipitation estimates from the Canadian Atmospheric Environment Service radar at Upsala, Ontario, were used to determine if this will enable a more accurate measure of the fire danger over the region. Three methods of interpolation of the fire danger between weather stations were compared: first, the standard practice of interpolating fire weather indexes from weather stations to any specified location; second, interpolating the weather variables, temperature, relative humidity, wind speed and precipitation from the weather station to any specified site and then calculating the fire weather indexes; third, interpolating weather variables as in Method 2 above except using the precipitation estimate from the radar and then calculating the fire weather indexes for any specified site. Overall, results indicate that the standard procedure of interpolating the fire weather indexes performs better than the other two methods. However, there are indexes where the other methods perform best (e.g., the fine fuel moisture code is best determined by using the radar precipitation estimation method). Fire management agencies should continue to use the standard practice of interpolating fire weather indexes to estimate fire danger between weather stations. Factors influencing the performance of the radar estimated precipitation method of estimating fire danger are discussed along with potential application of precipitation radar for fire management purposes.


2020 ◽  
Author(s):  
Megan McElhinny ◽  
Justin F. Beckers ◽  
Chelene Hanes ◽  
Mike Flannigan ◽  
Piyush Jain

Abstract. We present a global high-resolution calculation of the Canadian Fire Weather Index (FWI) System Indices using surface meteorology from the ERA5-HRS reanalysis for 1979–2018. ERA5-HRS represents an improved dataset compared to several other reanalyses in terms of accuracy, as well as spatial and temporal coverage. The FWI calculation is performed using two different procedures for setting the start-up value of the Drought Code (DC) at the beginning of the fire season. The first procedure, which accounts for the effects of inter-seasonal drought, overwinters the DC by adjusting the fall DC value with a fraction of accumulated overwinter precipitation. The second procedure sets the DC to its default start-up value (i.e. 15) at the start of each fire season. We validate the FWI values over Canada using station observations from Environment and Climate Change Canada and find generally good agreement (mean Spearman correlation of 0.77). We also show that significant differences in early season DC and FWI values can occur when the FWI System calculation is started using the overwintered versus default DC values, as is highlighted by an example from 2016 over North America. The FWI System moisture codes and fire behavior indices are made available for both versions of the calculation at https://doi.org/10.5281/zenodo.3626193 (McElhinny et al., 2020), although we recommend using codes and indices calculated with the overwintered DC, unless specific research requirements dictate otherwise.


Rangifer ◽  
2003 ◽  
Vol 23 (5) ◽  
pp. 247 ◽  
Author(s):  
Émilie Lantin ◽  
Pierre Drapeau ◽  
Marcel Paré ◽  
Yves Bergeron

Woodland caribou (Rangifer tarandus caribou) require a diversity of forested habitats over large areas and may thus be particularly affected by the large-scale changes in the composition and age-class distribution of forest landscapes induced by the northern expansion of forest management. In this study we examine habitat characteristics associated to the use of calving areas by woodland caribou females and calves at different spatial scales. Thirty females were captured and collared with Argos satellite transmitters that allowed to locate 14 calving areas. Field surveys were conducted at each of these areas to measure the landscape composition of forest cover types and local vegetation characteristics that are used for both forage conditions and protection cover. At the scale of the calving area, univariate comparisons of the amount of forest cover types between sites with and without calves showed that the presence of calves was associated to mature black spruce forest with a high percent cover of terrestrial lichens. Within calving grounds, univariate comparisons showed that vegetation features like ericaceans and terrestrial lichens, that are important food resources for lactating females, were more abundant in calving areas where females were seen with a calf in mid-July than in areas where females were seen alone. The protection of the vegetation cover against predators was however similar between calving areas with or with¬out a calf. Logistic regression results also indicated that vegetation characteristics associated to forage conditions were positively associated to calf presence on calving grounds. Our results suggest that foraging conditions should be given more attention in analyses on habitat requirements of woodland caribou.


1999 ◽  
Vol 9 (3) ◽  
pp. 183 ◽  
Author(s):  
Laura L. Bourgeau-Chavez ◽  
Eric S. Kasischke ◽  
Mark D. Rutherford

Research was conducted to determine the utility of Synthetic Aperture Radar (SAR) data for measuring the fuel moisture status of boreal forests as reflected in Fire Weather Index Codes. Three years (May to August 1992–1995) of SAR data from the European Remote Sensing Satellite (ERS) were analysed over the 1990 Tok Alaska burned and adjacent unburned black spruce forests. Corresponding Fire Weather Index Codes of the Canadian Forest Fire Danger Rating System were obtained from Tok Area Forestry, Station number 500720. Strong relationships were expected between the SAR data and fire codes because of the dependence of ERS SAR backscatter on the moisture status of forests and exposed surfaces (burn scars). Astepwise multilinear regression procedure was used to analyse the relationships. Three statistically significant multilinear regression models resulted from this analysis procedure. The models developed show there is potential for using ERS SAR backscatter to generate indicators that are related to Fire Weather Index, Duff Moisture Code, and Drought Code. This research could lead to the ability for remote prediction of fire danger over large regions at relatively fine spatial resolution with minimal weather information.


2019 ◽  
Vol 8 (2) ◽  
pp. 18
Author(s):  
Mamadou Baïlo Barry ◽  
Daouda Badiane ◽  
Saïdou Moustapha Sall ◽  
Moussa Diakhaté ◽  
Habib Senghor

The relationships between the Canadian Fire Weather Index (FWI) System components and the monthly burned area as well as the number of active fire which has taken from Moderate Resolution Imaging Spectroradiometer (MODIS) Aqua/TERRA were investigated in 32 Guinean stations between 2003 and 2013. A statistical analysis based on a multi-linear regression model was used to estimate the skills of FWI components on the predictability of burned area and active fire. This statistical analysis gave performances explaining between 16 to 79% of the variance for the burned areas and between 29 and 82% of the variance for the number of fires (P<0.0001) at lag 0. Respectively 16 to 79 % and 29 to 82 % of the variance of the burned areas and variance for the number of fires (P<0.0001) at lag0 can be explained based on the same statistical analysis. All the combinations used gave significant performances to predict the burned areas and active fire on the monthly timescale in all stations excepted Fria and Yomou where the predictability of the burned areas was not obvious. We obtained a significant correlation between the average over all of the stations of burned areas, active fires and FWI composites with percentage of variance between (75 to 84% and 29 to 77%) for active fires and burned areas at lag0 respectively. While for burned area peak (January), the skill of the predictability remains significant only one month in advance, for the active fires, the model remains skilful 1 to 3 months in advance. Results also showed that active fires are more related to fire behavior indices while the burned areas are related to the fine fuel moisture codes. These outcomes have implications for seasonal forecasting of active fire events and burned areas based on FWI components, as significant predictability is found from 1 to 3 months and one month before respectively.


2005 ◽  
Vol 14 (2) ◽  
pp. 131 ◽  
Author(s):  
Tamara J. Streeks ◽  
M. Keith Owens ◽  
Steve G. Whisenant

The vegetation of South Texas has changed from mesquite savanna to mixed mesquite–acacia (Prosopis–Acacia) shrubland over the last 150 years. Fire reduction, due to lack of fine fuel and suppression of naturally occurring fires, is cited as one of the primary causes for this vegetation shift. Fire behavior, primarily rate of spread and fire intensity, is poorly understood in these communities, so fire prescriptions have not been developed. We evaluated two current fire behavior systems (BEHAVE and the CSIRO fire spread and fire danger calculator) and three models developed for shrublands to determine how well they predicted rate of spread and flame length during three summer fires within mesquite–acacia shrublands. We also used geostatistical analyses to examine the spatial pattern of net heat, flame temperature and fuel characteristics. The CSIRO forest model under-predicted the rate of fire spread by an average of 5.43 m min−1 and over-predicted flame lengths by 0.2 m while the BEHAVE brush model under-predicted rate of spread by an average of 6.57 m min−1 and flame lengths by an average of 0.33 m. The three shrubland models did not consistently predict the rate of spread in these plant communities. Net heat and flame temperature were related to the amount of 10-h fuel on the site, but were not related to the cover of grasses, forbs, shrubs, or apparent continuity of fine fuel. Fuel loads were typical of South Texas shrublands, in that they were uneven and spatially inconsistent, which resulted in an unpredictable fire pattern.


2021 ◽  
Author(s):  
Anasuya Barik ◽  
Somnath Baidya Roy

&lt;p&gt;The Canadian Forest Fire Danger Rating System (CFFDRS) is used to assess and predict the fire behavior in various forest ecosystems all over the world. The Fire Weather Index (FWI) module of the CFFDRS models the relationship between meteorology and forest fires. It was observed in our earlier study that the values of the FWI and its related parameters were considerably different from the other countries that use the model for their operational fire weather simulation. In this study we evaluate the model performance over Indian climate for a period of 10 years 1996-2005 under various weather scenarios. The daily meteorological data from ECMWF&amp;#8217;s ERA5 reanalysis has been used as inputs to the fire model and the active fire data from MODIS Terra and Aqua satellites over the study period has been used to evaluate the capability of model to simulate fire danger. As India has many different climatic zones, we evaluated the behavior fire model parameters over 5 forest zones namely Himalayan, Deciduous, Western Ghats, Thorn forests and North Eastern forests based on the Roy et al. 2016 Land Use Land Cover data and Koppen climatic zones.&amp;#160; The analysis was narrowed down over only the forest areas of the zones so as to remove any chances of including the non-forest fires detected by the satellite. Results show that the FWI shows a strong correlation with forest fires if the model is correctly spun up and appropriately calibrated. A spin up time of minimum 60 days was found to be appropriate for stabilization of FWI components like Duff Moisture Code (DMC) and Drought Code (DC). Sensitivity studies showed that temperature and relative humidity are the key controlling factors of forest fires over India and that the parameters depict high interannual seasonality due to relatively lower values during the Indian monsoon season.&lt;/p&gt;&lt;p&gt;This study is one of the first attempts to use fire models to simulate fire behavior over India. It can serve as a launchpad for further work on fire hazard prediction and effects of climate change on fire hazard in India.&lt;/p&gt;


Sign in / Sign up

Export Citation Format

Share Document