scholarly journals INVERSION OF A MAPPING ASSOCIATED WITH THE AOMOTO–FORRESTER SYSTEM

2013 ◽  
Vol 25 (10) ◽  
pp. 1343009
Author(s):  
RAQUEL CASEIRO ◽  
JEAN-PIERRE FRANCOISE ◽  
RYU SASAKI

This article is devoted to the study of a general class of Hamiltonian systems which extends the Calogero systems with external quadratic potential associated to any root system. The interest for such a class comes from a previous article of Aomoto and Forrester. We consider first the one-degree of freedom case and compute the Birkhoff series defined near each of its stationary points. In general, the analysis of the system motivates finding some expression for the inverses of a rational map introduced by Aomoto and Forrester. We derive here some diagrammatic expansion series for these inverses.

Author(s):  
Shahriar Aslani ◽  
Patrick Bernard

Abstract In the study of Hamiltonian systems on cotangent bundles, it is natural to perturb Hamiltonians by adding potentials (functions depending only on the base point). This led to the definition of Mañé genericity [ 8]: a property is generic if, given a Hamiltonian $H$, the set of potentials $g$ such that $H+g$ satisfies the property is generic. This notion is mostly used in the context of Hamiltonians that are convex in $p$, in the sense that $\partial ^2_{pp} H$ is positive definite at each point. We will also restrict our study to this situation. There is a close relation between perturbations of Hamiltonians by a small additive potential and perturbations by a positive factor close to one. Indeed, the Hamiltonians $H+g$ and $H/(1-g)$ have the same level one energy surface, hence their dynamics on this energy surface are reparametrisation of each other, this is the Maupertuis principle. This remark is particularly relevant when $H$ is homogeneous in the fibers (which corresponds to Finsler metrics) or even fiberwise quadratic (which corresponds to Riemannian metrics). In these cases, perturbations by potentials of the Hamiltonian correspond, up to parametrisation, to conformal perturbations of the metric. One of the widely studied aspects is to understand to what extent the return map associated to a periodic orbit can be modified by a small perturbation. This kind of question depends strongly on the context in which they are posed. Some of the most studied contexts are, in increasing order of difficulty, perturbations of general vector fields, perturbations of Hamiltonian systems inside the class of Hamiltonian systems, perturbations of Riemannian metrics inside the class of Riemannian metrics, and Mañé perturbations of convex Hamiltonians. It is for example well known that each vector field can be perturbed to a vector field with only hyperbolic periodic orbits, this is part of the Kupka–Smale Theorem, see [ 5, 13] (the other part of the Kupka–Smale Theorem states that the stable and unstable manifolds intersect transversally; it has also been studied in the various settings mentioned above but will not be discussed here). In the context of Hamiltonian vector fields, the statement has to be weakened, but it remains true that each Hamiltonian can be perturbed to a Hamiltonian with only non-degenerate periodic orbits (including the iterated ones), see [ 11, 12]. The same result is true in the context of Riemannian metrics: every Riemannian metric can be perturbed to a Riemannian metric with only non-degenerate closed geodesics, this is the bumpy metric theorem, see [ 1, 2, 4]. The question was investigated only much more recently in the context of Mañé perturbations of convex Hamiltonians, see [ 9, 10]. It is proved in [ 10] that the same result holds: if $H$ is a convex Hamiltonian and $a$ is a regular value of $H$, then there exist arbitrarily small potentials $g$ such that all periodic orbits (including iterated ones) of $H+g$ at energy $a$ are non-degenerate. The proof given in [ 10] is actually rather similar to the ones given in papers on the perturbations of Riemannian metrics. In all these proofs, it is very useful to work in appropriate coordinates around an orbit segment. In the Riemannian case, one can use the so-called Fermi coordinates. In the Hamiltonian case, appropriate coordinates are considered in [ 10,Lemma 3.1] itself taken from [ 3, Lemma C.1]. However, as we shall detail below, the proof of this Lemma in [ 3], Appendix C, is incomplete, and the statement itself is actually wrong. Our goal in the present paper is to state and prove a corrected version of this normal form Lemma. Our proof is different from the one outlined in [ 3], Appendix C. In particular, it is purely Hamiltonian and does not rest on the results of [ 7] on Finsler metrics, as [ 3] did. Although our normal form is weaker than the one claimed in [ 10], it is actually sufficient to prove the main results of [ 6, 10], as we shall explain after the statement of Theorem 1, and probably also of the other works using [ 3, Lemma C.1].


1965 ◽  
Vol 60 ◽  
pp. 159-202 ◽  
Author(s):  
Elizabeth French

The L.H. IIIA 2 period according to Furumark's chronology covers the fourteenth century, a crucial phase in Mycenaean history and, whatever absolute dates are eventually assigned to the period, the pottery belonging to it marks the vast expansion of Mycenaean trade throughout the Eastern Mediterranean. It is therefore extremely important to determine what pottery must and what pottery may belong to L.H. IIIA 2. The definition of L.H. IIIA 1 pottery adopted in a previous article enables us to deal with the beginning of the period. The division between L.H. IIIA 2 late and L.H. IIIB 1 can be placed, in terms of the pottery from settlement sites, at one of two points. The earlier would be the introduction of the vertical (as compared with horizontal or diagonal) Whorl-Shells. This was suggested by Mackeprang. The later point, and the one adopted in this discussion, is the introduction of the Deep Bowl (FS 284) and in unpainted ware the Conical Kylix (FS 274). This later terminus seems preferable as a more radical and easily recognizable development.


2004 ◽  
Vol 26 (1) ◽  
pp. 1-10
Author(s):  
Nguyen Dong Anh ◽  
Nguyen Chi Sang

The design of active TMD for multi-degree-of-freedom systems subjected to second order coloured noise excitation is considered using the linear quadratic optimal theory. A detailed numerical study is carried out for a 2-DOF system. It is shown that the effectiveness of active TMD is better than the one of passive TMD.


Author(s):  
Brian E Cox

This article follows an earlier assessment of Bentham’s views on guardianship 1 that touched on but did not explore connections or departures between guardian-ward and parent-offspring relations, about which Bentham was not as precise as he might have been. Further, he added complexity to the issue by describing parents as occupying dual roles: guardians and ‘masters’ (employers) of their own offspring. These relations are now considered, on the one hand, in the wider context of ‘special relations’ and ‘duties’ and, on the other hand, alongside some appreciation of Bentham’s personal perspectives. However, the main object of the present article is to assess similarities and differences between parents and guardians in legal, status and functional terms. It uses the profile of guardian-ward relations provided by the previous article 2 as a benchmark. The article concludes by affirming that ‘being a parent’ and ‘being a guardian’ have quite different meanings.


1997 ◽  
Vol 64 (1) ◽  
pp. 227-229 ◽  
Author(s):  
M. F. Beatty

Wilms (1995) has considered the plane motion of three lineal rigid bodies subject to linear damping over their length. He shows that these plane single-degree-of-freedom systems are governed by precisely the same fundamental differential equation. It is not unusual that several dynamical systems may be formally characterized by the same differential equation, but the universal differential equation for these systems is unusual because it is exactly the same equation for the three very different systems. It is shown here that these problems belong to a more general class of problems for which the differential equation is exactly the same for every lineal rigid body regardless of its geometry.


1958 ◽  
Vol 25 (3) ◽  
pp. 357-360
Author(s):  
R. H. Cannon

Abstract A gyroscope can incur steady drift by kinematically rectifying angular vibrations of the platform on which it is mounted. The phenomenon, for an unrestrained single-degree-of-freedom gyro, results from oscillatory precession of the gyro momentum vector from its nominal spatial orientation, so that it senses platform motions about axes other than the one it is controlling. The magnitude of the drift can be accurately predicted and the vibration climate of the platform restricted accordingly. Quantitative experimental verification is presented.


Robotica ◽  
2018 ◽  
Vol 37 (7) ◽  
pp. 1174-1189 ◽  
Author(s):  
Yuanqing Wu ◽  
Marco Carricato

SUMMARYWe present singularity-free workspace optimization of a class of two-degree-of-freedom (2-DoF) parallel wrists with large rotation range capability. The wrists in consideration are kinematically equivalent to two families of 2-DoF homokinetic couplings. The first family comprises fully parallel wrists with N (N ≥ 3) double-universal ($\mathcal{UU}$) legs. The second family comprises spherical N-$\mathcal{UU}$ parallel wrists with interconnecting revolute ($\mathcal{R}$) joints. Both families belong to the more general class of zero-torsion parallel manipulators, and are, therefore, collectively referred to as zero-torsion wrists (ZTWs). We carry out a unified singularity-free workspace optimization by utilizing geometric properties of zero-torsion motion manifolds. Our work may serve as a conceptual guide to the design of ZTWs for large tilt-angle applications.


Robotics ◽  
2018 ◽  
Vol 7 (3) ◽  
pp. 51
Author(s):  
Maurizio Ruggiu ◽  
Xianwen Kong

The paper deals with the reconfiguration analysis of the single-loop variable degree-of-freedom (DOF) RRRRS mechanism composed of five links connected by four revolute (R) joints and one spherical (S) joint. The mechanism may show two modes of motion: one-DOF and two-DOF motion. In the paper, a classical vector procedure is used to obtain the quartic motion equation (QME) that allows one to inspect the nature of the motion. In general, the solutions of the QME provide the one-DOF motion of the mechanism except when all the coefficients of the equation vanish. In this case, the mechanism undergoes the two-DOF motion. The motion of the mechanism built according to two specific architectures was analyzed by the numerical solutions of the QME and with the help of the solid model of the mechanism. It is revealed for the first time that the perpendicular architecture has one 2-DOF motion and two 1-DOF motion modes.


Sign in / Sign up

Export Citation Format

Share Document