Estimations of fission barrier heights for Ra, Ac, Rf and Db nuclei by neural networks

2014 ◽  
Vol 23 (10) ◽  
pp. 1450064 ◽  
Author(s):  
Serkan Akkoyun ◽  
Tuncay Bayram
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Mean Square Error ◽  
Fission Barrier ◽  
Accurate Information ◽  
Mean Square ◽  
Fission Process ◽  
Barrier Heights ◽  
R Process ◽  
Artificial Neural Network Ann

Accurate information about the fission barrier is important for studying of the fission process. Fission barrier is needed for discovering the island of stability in superheavy region and searching of the superheavy elements. Furthermore, the astrophysical r-process is closely related to the fission barrier of the neutron-rich nuclei. In this study, by using artificial neural network (ANN) method, we have estimated the fission barrier heights of the Rf , Db , Ra and Ac nuclei covering 230 isotopes. For inner barrier calculation, we have used Rf and Db nuclei and the barrier heights have been determined between nearly 1 MeV and 7 MeV. The related mean square error value has been obtained as 0.108 MeV. For outer barrier calculation, we have used Ra and Ac nuclei and the heights have been determined between nearly 8 MeV and 28 MeV. The related mean square error has been obtained as 0.407. The results of this study indicate that ANN is capable for the estimations of inner and outer fission barrier heights.

Detection of Biomedical Images by Using Bio-inspired Artificial Intelligent

2020 ◽  
Vol 38 (2A) ◽  
pp. 255-264
Author(s):  
Hanan A. R. Akkar ◽  
Sameem A. Salman
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Mean Square Error ◽  
Average Rate ◽  
Mean Square ◽  
Performance Measurements ◽  
Artificial Intelligent ◽  
Average Mean Square Error ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

Computer vision and image processing are extremely necessary for medical pictures analysis. During this paper, a method of Bio-inspired Artificial Intelligent (AI) optimization supported by an artificial neural network (ANN) has been widely used to detect pictures of skin carcinoma. A Moth Flame Optimization (MFO) is utilized to educate the artificial neural network (ANN). A different feature is an extract to train the classifier. The comparison has been formed with the projected sample and two Artificial Intelligent optimizations, primarily based on classifier especially with, ANN-ACO (ANN training with Ant Colony Optimization (ACO)) and ANN-PSO (training ANN with Particle Swarm Optimization (PSO)). The results were assessed using a variety of overall performance measurements to measure indicators such as Average Rate of Detection (ARD), Average Mean Square error (AMSTR) obtained from training, Average Mean Square error (AMSTE) obtained for testing the trained network, the Average Effective Processing Time (AEPT) in seconds, and the Average Effective Iteration Number (AEIN). Experimental results clearly show the superiority of the proposed (ANN-MFO) model with different features.

Modeling of Phenol Degradation in Spouted Bed Contactor Using Artificial Neural Network (ANN)

2008 ◽  
Vol 3 (2) ◽  
Author(s):  
Madhukar A. Dabhade ◽  
M. B. Saidutta ◽  
D. V. R. Murthy
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Mean Square Error ◽  
Model Prediction ◽  
Phenol Degradation ◽  
Mean Square ◽  
Ann Model ◽  
Spouted Bed ◽  
The Mean ◽  
Artificial Neural Network Ann

Presence of phenol and phenolic compounds in various wastewaters and its harmful effects has led to the use of different treatment methods. Work on biological methods shows the use of different microorganisms and different bioreactors so as to improve the removal efficiency economically. The present work deals with the use of N. hydrocarbonoxydans (NCIM 2386), an actinomycetes, for the degradation of phenol. N. hydrocarbonoxydans was immobilized on GAC and used in a spouted bed contactor for effective contact of microorganisms and the substrate. The contactor performance was studied by varying flow rates, influent concentrations and the solids loading in the contactor. The effect of these variables on phenol degradation was investigated and modeling study was carried out using the artificial neural network (ANN). A feed forward neural network with back propagation was used for the model development. The experiments were planned as per the face centered cube design (FCCD) and used for training of the model, whereas data from four other experimental runs were used for testing and validation of the model. The network was optimized for the number of neurons based on the mean square error. The ANN model with three layers with three input neurons, eight neurons in hidden layers and one output neuron was found to predict effectively the effluent concentration for the given operating conditions in the spouted bed contactor. The mean square error was found to be 9.318e-12 for this ANN model. Also the experimental data was used to develop second order nonlinear empirical model obtained using multiple regression (MR) and the results compared with ANN using correlation coefficient (R2), average absolute error (AAE) and root mean square error (RMSE). Results show that R2, AAE and RMSE values of MR model were 0.9363, 2.085 % and 2.338 % respectively, while in case of ANN model these values were 0.9995, 0.59 % and 1.263 % respectively. This shows that ANN model prediction is better than multiple regression model prediction.

scholarly journals The modelling of lead removal from water by deep eutectic solvents functionalized CNTs: artificial neural network (ANN) approach

2017 ◽  
Vol 76 (9) ◽  
pp. 2413-2426 ◽  
Author(s):  
Seef Saadi Fiyadh ◽  
Mohammed Abdulhakim AlSaadi ◽  
Mohamed Khalid AlOmar ◽  
Sabah Saadi Fayaed ◽  
Ako R. Hama ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Back Propagation ◽  
Deep Eutectic Solvents ◽  
Lead Removal ◽  
Mean Square ◽  
Feed Forward Back Propagation ◽  
Artificial Neural Network Ann

Abstract The main challenge in the lead removal simulation is the behaviour of non-linearity relationships between the process parameters. The conventional modelling technique usually deals with this problem by a linear method. The substitute modelling technique is an artificial neural network (ANN) system, and it is selected to reflect the non-linearity in the interaction among the variables in the function. Herein, synthesized deep eutectic solvents were used as a functionalized agent with carbon nanotubes as adsorbents of Pb2+. Different parameters were used in the adsorption study including pH (2.7 to 7), adsorbent dosage (5 to 20 mg), contact time (3 to 900 min) and Pb2+ initial concentration (3 to 60 mg/l). The number of experimental trials to feed and train the system was 158 runs conveyed in laboratory scale. Two ANN types were designed in this work, the feed-forward back-propagation and layer recurrent; both methods are compared based on their predictive proficiency in terms of the mean square error (MSE), root mean square error, relative root mean square error, mean absolute percentage error and determination coefficient (R2) based on the testing dataset. The ANN model of lead removal was subjected to accuracy determination and the results showed R2 of 0.9956 with MSE of 1.66 × 10−4. The maximum relative error is 14.93% for the feed-forward back-propagation neural network model.

Neural networks for modelling the energy consumption of metro trains

2019 ◽  
Vol 234 (7) ◽  
pp. 722-733 ◽  
Author(s):  
Pablo Martínez Fernández ◽  
Pablo Salvador Zuriaga ◽  
Ignacio Villalba Sanchís ◽  
Ricardo Insa Franco
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Energy Consumption ◽  
Mean Square Error ◽  
Mean Square ◽  
The Neural Network ◽  
Train Speed ◽  
Input Variables ◽  
Trained Neural Network ◽  
Traction Power

This paper presents the application of machine learning systems based on neural networks to model the energy consumption of electric metro trains, as a first step in a research project that aims to optimise the energy consumed for traction in the Metro Network of Valencia (Spain). An experimental dataset was gathered and used for training. Four input variables (train speed and acceleration, track slope and curvature) and one output variable (traction power) were considered. The fully trained neural network shows good agreement with the target data, with relative mean square error around 21%. Additional tests with independent datasets also give good results (relative mean square error = 16%). The neural network has been applied to five simple case studies to assess its performance – and has proven to correctly model basic consumption trends (e.g. the influence of the slope) – and to properly reproduce acceleration, holding and braking, although it tends to slightly underestimate the energy regenerated during braking. Overall, the neural network provides a consistent estimation of traction power and the global energy consumption of metro trains, and thus may be used as a modelling tool during further stages of research.

APPLICATION OF ARTIFICIAL NEURAL NETWORKS FOR PREDICTION OF POSITIVE DYNAMICS FOR TREATMENT OF PATIENTS WITH TUBERCULOSIS

2020 ◽  
Author(s):  
Marina Ermolickaya
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Networks ◽  
Mean Square Error ◽  
Network Model ◽  
Neural Network Model ◽  
Test Sample ◽  
Mean Square ◽  
Tuberculosis Patients ◽  
The Mean

Using the RStudio program, a neural network model has been developed that predicts positive dynamics in the treatment of tuberculosis patients in a tuberculosis dispensary hospital. The accuracy of the presented model on the test sample is 99.4%, the mean square error (MSE) is 0.013.

scholarly journals Deep Learning Techniques Applied to Predict and Measure Finger Movement in Patients with Multiple Sclerosis

2021 ◽  
Vol 11 (7) ◽  
pp. 3137
Author(s):  
Dmitry Viatkin ◽  
Begonya Garcia-Zapirain ◽  
Amaia Méndez Méndez Zorrilla
Keyword(s):  
Neural Network ◽  
Multiple Sclerosis ◽  
Neural Networks ◽  
Mean Square Error ◽  
Ring Finger ◽  
Absolute Error ◽  
Input Image ◽  
Finger Joint ◽  
Mean Square ◽  
Joint Angles

This research focuses on the development of a system for measuring finger joint angles based on camera image and is intended for work within the field of medicine to track the movement and limits of hand mobility in multiple sclerosis. Measuring changes in hand mobility allows the progress of the disease and its treatment process to be monitored. A static RGB camera without depth vision was used in the system developed, with the system receiving only the image from the camera and no other input data. The research focuses on the analysis of each image in the video stream independently of other images from that stream, and 12 measured hand parameters were chosen as follows: 3 joint angles for the index finger, 3 joint angles for the middle finger, 3 joint angles for the ring finger, and 3 joint angles for the pinky finger. Convolutional neural networks were used to analyze the information received from the camera, and the research considers neural networks based on different architectures and their combinations as follows: VGG16, MobileNet, MobileNetV2, InceptionV3, DenseNet, ResNet, and convolutional pose machine. The final neural network used for image analysis was a modernized neural network based on MobileNetV2, which obtained the best mean absolute error value of 4.757 degrees. Additionally, the mean square error was 67.279 and the root mean square error was 8.202 degrees. This neural network analyzed a single image from the camera without using other sensors. For its part, the input image had a resolution of 512 by 512 pixels, and was processed by the neural network in 7–15 milliseconds by GPU Nvidia 2080ti. The resulting neural network developed can measure finger joint angle values for a hand with non-standard parameters and positions.

Prediction of Significant Wave Height Using Neural Network in the Java Sea (North of Surabaya)

2017 ◽  
Vol 862 ◽  
pp. 72-77
Author(s):  
Wimala L. Dhanistha ◽  
R.A. Atmoko ◽  
P. Juniarko ◽  
Ridho Akbar
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Wave Height ◽  
Mean Square ◽  
The North ◽  
Java Sea ◽  
The City

Indonesia is an archipelago, Surabaya is the second crowded city in Indonesia. So the shipping lane and the city is comparable. Neural network is models inspired by biological neural networks and used to estimate or approximate functions that can depend on a large number of inputs and are generally unknown. Neural network is used to predict the wave height in Java Sea (The North of Surabaya). The Root Mean Square Error average for the next one hour is 0.03 and the Root Mean Square Error average for the next six hours is 0.09. That’s mean the longest the prediction, the biggest Root Mean Square error.

scholarly journals Aplikasi Artificial Neural Network (ANN) untuk Memprediksi Masa Studi Mahasiswa Program Studi Teknik Informatika Universitas Muhammadiyah Gresik

2019 ◽  
Vol 9 (1) ◽  
pp. 88-95
Author(s):  
Henny Dwi Bhakti
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Mean Square Error ◽  
Drop Out ◽  
Mean Square ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

Kualitas mahasiswa merupakan bagian penting dalam institusi pendidikan. Universitas perlu melakukan evaluasi performa mahasiswa untuk menjaga kualitas mahasiswa. Salah satu variabel indikator performa mahasiswa adalah informasi tentang lama masa studi mahasiswa. Prediksi lama masa studi dibutuhkan pihak manajemen Universitas dalam menentukan kebijakan preventif terkait pencegahan dini kasus Drop Out (DO). Artificial Neural Network (ANN) adalah suatu metode yang meniru jaringan syaraf biologis untuk mempelajari sesuatu. Salah satu implementasi ANN yang banyak digunakan adalah untuk memprediksi. Penelitian ini melakukan prediksi masa studi mahasiswa dengan menggunakan ANN dengan metode pembelajaran backpropagation. Variabel yang digunakan adalah nilai Indeks Prestasi Semester (IPS) 4 semester awal mahasiswa. Data dibagi menjadi data latih dan data uji. Dari hasil pelatihan dan pengujian didapatkan nilai Mean Square Error (MSE) dan Koefisien Relasi (R). MSE digunakan untuk melihat kesalahan rata-rata antara output jaringan dengan target. Nilai R digunakan untuk melihat kuat atau tidaknya hubungan linier antara 2 variabel. Nilai MSE dan koefisien relasi pelatihan adalah 0,016175 dan 0,94353 sedangkan nilai MSE dan koefisien relasi pengujian adalah 0,12188 dan 0,56071. Dari hasil penelitian dapat disimpulkan bahwa ANN dapat digunakan untuk memprediksi masa studi mahasiswa.

scholarly journals Analyzing the Compressive Strength of Ceramic Waste-Based Concrete Using Experiment and Artificial Neural Network (ANN) Approach

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4518
Author(s):  
Hongwei Song ◽  
Ayaz Ahmad ◽  
Krzysztof Adam Ostrowski ◽  
Marta Dudek
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Compressive Strength ◽  
Solid Waste ◽  
Mean Square Error ◽  
Partial Replacement ◽  
Mean Square ◽  
Ceramic Waste ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

In a fast-growing population of the world and regarding meeting consumer’s requirements, solid waste landfills will continue receiving a substantial amount of waste. The utilization of solid waste materials in concrete has gained the attention of the researchers. Ceramic waste powder (CWP) is considered to be one of the most harmful wastes for the environment, which may cause water, soil, and air pollution. The aim of this study was comprised of two phases. Phase one was based on the characterization of CWP with respect to its composition, material testing (coarse aggregate, fine aggregate, cement,) and evaluation of concrete properties both in fresh and hardened states (slump, 28 days compressive strength, and dry density). Concrete mixes were prepared in order to evaluate the compressive strength (CS) of the control mix, with partial replacement of the cement with CWP of 10 and 20% by mass of cement and 60 prepared mixes. However, phase two was based on the application of the artificial neural network (ANN) and decision tree (DT) approaches, which were used to predict the CS of concrete. The linear coefficient correlation (R2) value from the ANN model indicates better performance of the model. Moreover, the statistical check and k-fold cross validation methods were also applied for the performance confirmation of the model. The mean absolute error (MAE), mean square error (MSE), and root mean square error (RMSE) were evaluated to confirm the model’s precision.

scholarly journals Compressive Strength Prediction via Gene Expression Programming (GEP) and Artificial Neural Network (ANN) for Concrete Containing RCA

Buildings ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 324
Author(s):  
Ayaz Ahmad ◽  
Krisada Chaiyasarn ◽  
Furqan Farooq ◽  
Waqas Ahmad ◽  
Suniti Suparp ◽  
...  
Keyword(s):  
Neural Network ◽  
Gene Expression ◽  
Artificial Neural Network ◽  
Compressive Strength ◽  
Mean Square Error ◽  
Gene Expression Programming ◽  
Mix Design ◽  
Mean Square ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

To minimize the environmental risks and for sustainable development, the utilization of recycled aggregate (RA) is gaining popularity all over the world. The use of recycled coarse aggregate (RCA) in concrete is an effective way to minimize environmental pollution. RCA does not gain more attraction because of the availability of adhered mortar on its surface, which poses a harmful effect on the properties of concrete. However, a suitable mix design for RCA enables it to reach the targeted strength and be applicable for a wide range of construction projects. The targeted strength achievement from the proposed mix design at a laboratory is also a time-consuming task, which may cause a delay in the construction work. To overcome this flaw, the application of supervised machine learning (ML) algorithms, gene expression programming (GEP), and artificial neural network (ANN) was employed in this study to predict the compressive strength of RCA-based concrete. The linear coefficient correlation (R2), mean absolute error (MAE), mean square error (MSE), and root mean square error (RMSE) were evaluated to investigate the performance of the models. The k-fold cross-validation method was also adopted for the confirmation of the model’s performance. In comparison, the GEP model was more effective in terms of prediction by giving a higher correlation (R2) value of 0.95 as compared to ANN, which gave a value of R2 equal to 0.92. In addition, a sensitivity analysis was conducted to know about the contribution level of each parameter used to run the models. Moreover, the increment in data points and the use of other supervised ML approaches like boosting, gradient boosting, and bagging to forecast the compressive strength, would give a better response.

Sign in / Sign up

Export Citation Format

Share Document