Seismic Performance of Reinforced Concrete Buildings in Thimphu, Bhutan

2017 ◽  
Vol 17 (07) ◽  
pp. 1750074 ◽  
Author(s):  
Kinzang Thinley ◽  
Hong Hao ◽  
Choki Tashi
Keyword(s):  
Seismic Design ◽  
Soil Structure ◽  
Hazard Analysis ◽  
Ground Motions ◽  
Capital City ◽  
Mitigation Measures ◽  
Rc Buildings ◽  
Design Code ◽  
Seismic Design Code ◽  
Proper Design

Inspite of its location in one of the most active seismic zones in the world, Bhutan has no seismic design code of its own and no detailed study on the performance of buildings under expected earthquake ground excitation has been carried out. In this study, probabilistic seismic hazard analysis is first carried out to predict the design ground motions in Thimphu, Bhutan for the return periods (RPs) of 475 and 2475 years. These ground motions are then used to assess the performance of three typical RC buildings in the capital city, Thimphu. Soil–structure interaction (SSI) is incorporated at different soil sites and the effects of SSI are discussed. Adequacy of using Indian Seismic Code in Bhutan is also studied and discussed. The study suggests that the typical buildings in Bhutan could undergo moderate to severe damages under the 475 year RP and could even collapse under the 2475 year RP ground motions. This study is the first such effort in predicting the design ground motions and then assessing the performance of the general building stocks in Bhutan. The result can guide the seismic preparedness of the country through proper design and mitigation measures.

Demand Diagrams Based on Inelastic Spectra: A Proposal for the Implementation of the Capacity Spectrum Method in the Romanian Seismic Design Code

2014 ◽  
Vol 580-583 ◽  
pp. 1600-1603 ◽  
Author(s):  
Iolanda Gabriela Craifaleanu
Keyword(s):  
Seismic Design ◽  
Strength Reduction ◽  
Capital City ◽  
Design Code ◽  
Capacity Spectrum Method ◽  
Spectrum Method ◽  
Capacity Spectrum ◽  
Seismic Design Code ◽  
Starting Point ◽  
Reduction Factors

During recent years, an increasing number of studies advocate the application of the capacity spectrum method based demand diagrams computed directly from inelastic response spectra, as an alternative to the basic formulation of the method, which uses elastic spectra computed for single degree-of-freedom oscillators with modified characteristics to account for inelastic behavior. When demand diagrams are based on the code-specified elastic spectrum, inelastic spectra are typically determined by dividing the elastic spectrum by strength reduction factors. The paper presents the application of the method, based on strength reduction factors computed with a unified analytical expression, deduced by the author in previous studies. The expression and is valid both for broadband and narrow band ground motions. Taking as a starting point the newly-enforced elastic design spectra in the 2013 edition of the Romanian seismic design code, the method is exemplified for the capital city, Bucharest. It is shown that, for the analyzed case, the use of the proposed strength reduction factors leads to results that are very close to those obtained by the “classical” nonlinear static procedure used in the code. This suggests a good potential for the implementation of the capacity spectrum method in the Romanian code, based on these factors.

scholarly journals Seismic Hazard Assessment for the Tianshui Urban Area, Gansu Province, China

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Zhenming Wang ◽  
David T. Butler ◽  
Edward W. Woolery ◽  
Lanmin Wang
Keyword(s):  
Seismic Hazard ◽  
Ground Motion ◽  
Seismic Design ◽  
Hazard Analysis ◽  
Seismic Hazard Assessment ◽  
Gansu Province ◽  
Mitigation Measures ◽  
Peak Ground Velocity ◽  
Ground Acceleration ◽  
Acceleration Time Histories

A scenario seismic hazard analysis was performed for the city of Tianshui. The scenario hazard analysis utilized the best available geologic and seismological information as well as composite source model (i.e., ground motion simulation) to derive ground motion hazards in terms of acceleration time histories, peak values (e.g., peak ground acceleration and peak ground velocity), and response spectra. This study confirms that Tianshui is facing significant seismic hazard, and certain mitigation measures, such as better seismic design for buildings and other structures, should be developed and implemented. This study shows that PGA of 0.3 g (equivalent to Chinese intensity VIII) should be considered for seismic design of general building and PGA of 0.4 g (equivalent to Chinese intensity IX) for seismic design of critical facility in Tianshui.

scholarly journals Loss assessment of building and content damages from potential earthquake risk in Seoul, Korea

2018 ◽  
Author(s):  
Wooil Choi ◽  
Jae-Woo Park ◽  
Jinhwan Kim
Keyword(s):  
Seismic Design ◽  
Korean Peninsula ◽  
Financial Stability ◽  
Building Code ◽  
Earthquake Risk ◽  
Design Code ◽  
Loss Assessment ◽  
Damage State ◽  
Damage Functions ◽  
Seismic Design Code

Abstract. After the 2016 Gyeongju earthquake and the 2017 Pohang earthquake struck the Korean peninsula, securing financial stability for earthquake risk has become an important issue in Korea. Many domestic researchers are currently studying potential earthquake risk. However, empirical analysis and statistical approach are ambiguous in the case of Korea because no major earthquake has ever occurred on the Korean peninsula since Korean Meteorological Agency started monitoring earthquakes in 1978. This study focuses on evaluating possible losses due to earthquake risk in Seoul, the capital of Korea, by using catastrophe model methodology integrated with GIS (Geographic Information System). The building information such as structure and location is taken from the building registration database and the replacement cost for building is obtained from insurance information. As the seismic design code in KBC (Korea Building Code) is similar to the seismic design code of UBC (Uniform Building Code), the damage functions provided by HAZUS-MH are used to assess the damage state of each building in event of an earthquake. 12 earthquake scenarios are evaluated considering the distribution and characteristics of active fault zones in the Korean peninsula, and damages with loss amounts are calculated for each of the scenarios.

Seismic Proving Test of Eroded Piping: Status of Eroded Piping Component and System Test

2003 ◽  
Author(s):  
Y. Namita ◽  
K. Suzuki ◽  
H. Abe ◽  
I. Ichihashi ◽  
M. Shiratori ◽  
...  
Keyword(s):  
Fatigue Life ◽  
Ultimate Strength ◽  
Seismic Design ◽  
Plastic Response ◽  
Design Code ◽  
Seismic Safety ◽  
Testing Program ◽  
Safety Margins ◽  
Seismic Design Code ◽  
Piping Systems

In FY 2000, a 3-year testing program of eroded piping was initiated with the following objectives: 1) to ascertain the seismic safety margins for eroded piping designed under the current seismic design code, 2) to clarify the elasto-plastic response and ultimate strength of eroded nuclear piping. A series of tests on eroded piping components and eroded piping systems was planned. In this paper, the results of those tests are presented and analyzed, focusing on the influence of the form and the number of thinned-wall portions on the fatigue life of the piping.

Seismic Proving Test of Eroded Piping: Program of Eroded Piping Tests

2002 ◽  
Author(s):  
Y. Namita ◽  
K. Suzuki ◽  
H. Abe ◽  
I. Ichihashi ◽  
M. Shiratori ◽  
...  
Keyword(s):  
Ultimate Strength ◽  
Seismic Design ◽  
Plastic Response ◽  
Design Code ◽  
Seismic Safety ◽  
Safety Margins ◽  
Seismic Design Code ◽  
Piping Systems

In 2000FY, a 3 year program of eroded piping tests was initiated with the following objectives: 1) to ascertain the seismic safety margins for eroded piping designed under the current seismic design code, 2) to clarify the elasto-plastic response and ultimate strength of eroded nuclear piping. It was intended to carry out a series of tests on eroded piping components and eroded piping systems. This paper is a report on the program of eroded piping tests.

scholarly journals Study on Optimization Seismic Design of Tall Building Structure

2015 ◽  
Vol 4 (2) ◽  
pp. 17
Author(s):  
Lei Yang
Keyword(s):  
Seismic Design ◽  
Optimization Design ◽  
Engineering Practice ◽  
Building Structure ◽  
Design Code ◽  
Stage Design ◽  
High Rise ◽  
Seismic Design Code ◽  
Earthquake Performance ◽  
Property Losses

<p>The heavy casualties and property losses caused by the earthquake this huge disaster, making high-rise building seismic become the focus of attention. Our new building seismic design code (GB50011-2001) (hereinafter referred to as "Seismic Design Code”) continue to be used (GBJ-89) specification to determine the "three earthquake performance objectives, two-stage design step" seismic design, and made many important supplement and perfect. The new seismic design of buildings in terms of requirements for introducing means as constraints optimization design, optimization design closer to engineering practice.</p>

Sign in / Sign up

Export Citation Format

Share Document