Perturbation Method for Thermal Post-buckling Analysis of Shear Deformable FG-CNTRC Beams with Different Boundary Conditions

2021 ◽  
pp. 2150175
Author(s):  
Hadi Babaei ◽  
Yaser Kiani ◽  
M. Reza Eslami
Keyword(s):  
Boundary Conditions ◽  
Volume Fraction ◽  
Perturbation Technique ◽  
Functionally Graded ◽  
Reinforced Composite ◽  
Post Buckling ◽  
Functionally Graded Media ◽  
Nonlinear Elastic ◽  
Foundation Parameters ◽  
Shear Deformable

This research aims to analyze the thermal buckling and post-buckling of carbon nanotube (CNT) reinforced composite beams. It is assumed that the beam is rested on a nonlinear elastic foundation which contains the Winkler spring, shear layer, and nonlinear spring. Distribution of CNTs across the thickness may be non-uniform which results in a functionally graded media. The elastic properties of the beam are evaluated using the refined rule of mixtures which contains efficiency parameters. Temperature dependency of the constituents is also taken into account. Using three different beam models, namely, first-order, third-order, and sinusoidal theories, the governing equations for the composite beam are established. Three different types of edge supports are considered which are pinned–pinned, clamped–clamped, and clamped–roller. With the aid of the two-step perturbation technique, closed-form expressions are extracted to obtain the elevated temperature as a function of the post-buckling deflection in the beam. Results of this study are compared with the available data in the literature. After that, new results are given to discuss the effects of important factors such as foundation parameters, geometrical characteristics, boundary conditions, the CNT volume fraction, and CNT pattern. It is shown that the critical buckling temperature of pinned–pinned and clamped–roller beams is the same while their post-buckling responses are totally different.

scholarly journals Nonlinear free vibration analysis of elastically supported carbon nanotube-reinforced composite beam with the thermal environment in non-deterministic framework

2017 ◽  
Vol 4 (1) ◽  
pp. 85-103 ◽  
Author(s):  
Virendra Kumar Chaudhari ◽  
Niranjan L. Shegokar ◽  
Achchhe Lal
Keyword(s):  
Carbon Nanotube ◽  
Free Vibration ◽  
Thermal Loading ◽  
Volume Fraction ◽  
Perturbation Technique ◽  
Order Perturbation ◽  
Nonlinear Free Vibration ◽  
Reinforced Composite ◽  
Elastically Supported ◽  
Foundation Parameters

AbstractThis paper deals with the investigation of nonlinear free vibration behavior of elastically supported carbon nanotube reinforced composite (CNTRC) beam subjected to thermal loading with random system properties. Material properties of each constituent’s material, volume fraction exponent and foundation parameters are considered as uncorrelated Gaussian random input variables. The beam is supported by a Pasternak foundation with Winkler cubic nonlinearity. The higher order shear deformation theory (HSDT) with von-Karman non-linearity is used to formulate the governing equation using Hamilton principle. Convergence and validation study is carried out through the comparison with the available results in the literature for authenticity and accuracy of the present approach used in the analysis. First order perturbation technique (FOPT),Second order perturbation technique (SOPT) and Monte Carlo simulation (MCS) methods are employed to investigate the effect of geometric configuration, volume fraction exponent, foundation parameters, distribution of reinforcement and thermal loading on nonlinear vibration characteristics CNTRC beam.The present work signifies the accurate analysis of vibrational behaviour influences by different random variables. Results are presented in terms of mean, variance (COV) and probability density function (PDF) for various aforementioned parameters.

scholarly journals Buckling Behavior of FG-CNT Reinforced Composite Conical Shells Subjected to a Combined Loading

Nanomaterials ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 419 ◽  
Author(s):  
Abdullah H. Sofiyev ◽  
Francesco Tornabene ◽  
Rossana Dimitri ◽  
Nuri Kuruoglu
Keyword(s):  
Volume Fraction ◽  
Shear Deformation Theory ◽  
Structural Response ◽  
Systematic Investigation ◽  
Functionally Graded ◽  
Combined Loading ◽  
Proportional Loading ◽  
Conical Shells ◽  
Reinforced Composite ◽  
Buckling Behavior

The buckling behavior of functionally graded carbon nanotube reinforced composite conical shells (FG-CNTRC-CSs) is here investigated by means of the first order shear deformation theory (FSDT), under a combined axial/lateral or axial/hydrostatic loading condition. Two types of CNTRC-CSs are considered herein, namely, a uniform distribution or a functionally graded (FG) distribution of reinforcement, with a linear variation of the mechanical properties throughout the thickness. The basic equations of the problem are here derived and solved in a closed form, using the Galerkin procedure, to determine the critical combined loading for the selected structure. First, we check for the reliability of the proposed formulation and the accuracy of results with respect to the available literature. It follows a systematic investigation aimed at checking the sensitivity of the structural response to the geometry, the proportional loading parameter, the type of distribution, and volume fraction of CNTs.

Static Analysis of Moderately Thick Functionally Graded Plates With Various Boundary Conditions

2010 ◽  
Author(s):  
Nastaran Shahmansouri ◽  
Mohammad Mohammadi Aghdam ◽  
Kasra Bigdeli
Keyword(s):  
Boundary Conditions ◽  
Volume Fraction ◽  
Closed Form Solution ◽  
Shear Deformation Theory ◽  
Functionally Graded ◽  
Rectangular Plates ◽  
Functionally Graded Plates ◽  
Various Boundary Conditions ◽  
Fg Plates ◽  
Ode Systems

The present study investigates static analyses of moderately thick FG plates. Using the First Order Shear Deformation Theory (FSDT), functionally graded plates subjected to transversely distributed loading with various boundary conditions are studied. Effective mechanical properties which vary from one surface of the plate to the other assumed to be defined by a power law form of distribution. Different ceramic-metal sets of materials are studied. Solution of the governing equations, including five equilibrium and eight constitutive equations, is obtained by the Extended Kantorovich Method (EKM). The system of thirteen Partial Differential Equations (PDEs) in terms of displacements, rotations, force and moment resultants are considered as multiplications of separable function of independent variables x and y. Then by successful utilization of the EKM these equations are converted to a double set of ODE systems in terms of x and y. The obtained ODE systems are then solved iteratively until final convergence is achieved. Closed form solution is presented for these ODE sets. It is shown that the method is very stable and provides fast convergence and highly accurate predictions for both thin and moderately thick plates. Comparison of the normal stresses at various points of rectangular plates and deflection of mid-point of the plate are presented and compared with available data in the literature. The effects of the volume fraction exponent n on the behavior of the normalized deflection, moment resultants and stresses of FG plates are also studied. To validate data for analysis fully clamped FG plates, another analysis was carried out using finite element code ANSYS. Close agreement is observed between predictions of the EKM and ANSYS.

Frequency optimization of laminated functionally graded carbon nanotube reinforced composite quadrilateral plates using smoothed FEM and evolution algorithm

2017 ◽  
Vol 52 (14) ◽  
pp. 1971-1986 ◽  
Author(s):  
T Vo-Duy ◽  
T Truong-Thi ◽  
V Ho-Huu ◽  
T Nguyen-Thoi
Keyword(s):  
Carbon Nanotube ◽  
Optimization Problem ◽  
Volume Fraction ◽  
Differential Evolution Algorithm ◽  
Composite Plates ◽  
Functionally Graded ◽  
Optimization Approach ◽  
Reinforced Composite ◽  
Design Variables ◽  
Evolution Algorithm

The paper presents an efficient numerical optimization approach to deal with the optimization problem for maximizing the fundamental frequency of laminated functionally graded carbon nanotube-reinforced composite quadrilateral plates. The proposed approach is a combination of the cell-based smoothed discrete shear gap method (CS-DSG3) for analyzing the first natural frequency of the functionally graded carbon nanotube reinforced composite plates and a global optimization algorithm, namely adaptive elitist differential evolution algorithm (aeDE), for solving the optimization problem. The design variables are the carbon nanotube orientation in the layers and constrained in the range of integer numbers belonging to [−900 900]. Several numerical examples are presented to investigate optimum design of quadrilateral laminated functionally graded carbon nanotube reinforced composite plates with various parameters such as carbon nanotube distribution, carbon nanotube volume fraction, boundary condition and number of layers.

scholarly journals Higher-Order Thermo-Elastic Analysis of FG-CNTRC Cylindrical Vessels Surrounded by a Pasternak Foundation

Nanomaterials ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 79 ◽  
Author(s):  
Masoud Mohammadi ◽  
Mohammad Arefi ◽  
Rossana Dimitri ◽  
Francesco Tornabene
Keyword(s):  
Deformation Theory ◽  
Volume Fraction ◽  
Effective Properties ◽  
Shear Deformation Theory ◽  
Pressure Vessels ◽  
Functionally Graded ◽  
Elastic Response ◽  
Governing Equations ◽  
Third Order ◽  
Reinforced Composite

This study analyses the two-dimensional thermo-elastic response of functionally graded carbon nanotube-reinforced composite (FG-CNTRC) cylindrical pressure vessels, by applying the third-order shear deformation theory (TSDT). The effective properties of FG-CNTRC cylindrical pressure vessels are computed for different patterns of reinforcement, according to the rule of mixture. The governing equations of the problem are derived from the principle of virtual works and are solved as a classical eigenproblem under the assumption of clamped supported boundary conditions. A large parametric investigation aims at showing the influence of some meaningful parameters on the thermo-elastic response, such as the type of pattern, the volume fraction of CNTs, and the Pasternak coefficients related to the elastic foundation.

Three-dimensional static and free vibration analysis of graphene platelet–reinforced porous composite cylindrical shell

2020 ◽  
Vol 26 (19-20) ◽  
pp. 1627-1645 ◽  
Author(s):  
Alireza Rahimi ◽  
Akbar Alibeigloo ◽  
Mehran Safarpour
Keyword(s):  
Cylindrical Shell ◽  
Free Vibration ◽  
Boundary Conditions ◽  
Distribution Patterns ◽  
Functionally Graded ◽  
Fourier Series Expansion ◽  
Graphene Platelet ◽  
Vibration Behavior ◽  
Reinforced Composite ◽  
Graphene Platelets

Because of promoted thermomechanical performance of functionally graded graphene platelet–reinforced composite ultralight porous structural components, this article investigates bending and free vibration behavior of functionally graded graphene platelet–reinforced composite porous cylindrical shell based on the theory of elasticity. Effective elasticity modulus of the composite is estimated with the aid of modified version of Halpin–Tsai micromechanics. Rule of mixtures is used to obtain mass density and Poisson’s ratio of the graphene platelet–reinforced composite shell. An analytical solution is introduced to obtain the natural frequencies and static behavior of simply supported cylindrical shell by applying the state-space technique along the radial coordinate and Fourier series expansion along the circumferential and axial direction. In addition, differential quadrature method is used to explore the response of the cylindrical shell in the other cases of boundary conditions. Validity of the applied approach is examined by comparing the numerical results with those published in the available literature. A comprehensive parametric study is conducted on the effects of different combinations of graphene platelets distribution patterns and porosity distribution patterns, boundary conditions, graphene platelets weight fraction, porosity coefficient, and geometry of the shell (such as mid-radius to thickness ratio and length to mid-radius ratio) on the bending and free vibration behavior of the functionally graded graphene platelet–reinforced composite porous cylindrical shell. The results of this study provide useful practical tips for engineers designing composite structures.

Non-linear thermo-mechanical cylindrical bending of functionally graded plates

2008 ◽  
Vol 222 (3) ◽  
pp. 305-318 ◽  
Author(s):  
F Fallah ◽  
A Nosier
Keyword(s):  
Boundary Conditions ◽  
Volume Fraction ◽  
Functionally Graded ◽  
Power Law Distribution ◽  
Cylindrical Bending ◽  
Closed Form Solutions ◽  
Simply Supported ◽  
Fg Plates ◽  
Non Linear ◽  
The One

Based on the first-order non-linear von Karman theory, cylindrical bending of functionally graded (FG) plates subjected to mechanical, thermal, and combined thermo-mechanical loadings are investigated. Analytical solutions are obtained for an FG plate with various clamped and simply-supported boundary conditions. The closed form solutions obtained are very simple to be used in design purposes. The material properties are assumed to vary continuously through the thickness of the plate according to a power-law distribution of the volume fraction of the constituents. The effects of non-linearity, material property, and boundary conditions on various response quantities are studied and discussed. It is found that linear analysis is inadequate for analysis of simply-supported FG plates even in the small deflection range especially when thermal load is present. Also it is shown that bending—extension coupling can not be seen in response quantities of clamped FG plates. Also an exact solution is developed for the one-dimensional heat conduction equation with variable heat conductivity coefficient.

Sign in / Sign up

Export Citation Format

Share Document