Single-Frequency Refractive Index Sensor Based on a Finite One-Dimensional Photonic Crystals with Two Defects

2006 ◽  
Vol 45 (8B) ◽  
pp. 6754-6758 ◽  
Author(s):  
H. Alatas ◽  
H. Mayditia ◽  
H. Hardhienata ◽  
A. A. Iskandar ◽  
M. O. Tjia
Author(s):  
Azka Umar ◽  
Chun Jiang

This paper focuses on manipulating thermal emission and radiation loss of heat energy in a heat waveguide. A One-Dimensional Photonic Crystal is used as a waveguide clad to prohibit the thermal emission from escaping. The model may reduce the radiation loss of heat energy in the waveguide core, and heat energy can be confined to propagate along the waveguide’s longitude axis. The waveguide clad comprises alternative layers of high and low refractive index materials containing sufficient electromagnetic stop bands to trap the thermal emission from escaping out of the waveguide. The numerical simulation of the model shows that the forbidden bandgap of photonic crystal structures with alternative layers of silica and silicon has width enough to make heat energy be confined within the waveguide core so that efficient heat energy transmission can be achieved along the longitude axis of the waveguide.


2018 ◽  
Vol 50 (4) ◽  
Author(s):  
S. M. Hamidi ◽  
M. Mahboubi ◽  
S. M. Mohseni ◽  
B. Azizi ◽  
A. Ghaderi ◽  
...  

2005 ◽  
Vol 1 (3) ◽  
pp. 201-204 ◽  
Author(s):  
Xiao-ming Shen ◽  
Xian-feng Chen ◽  
Mei-ping Jiang ◽  
Du-fang Shi

2020 ◽  
Author(s):  
A. Bouzidi ◽  
D. Bria ◽  
Hala J. El-Khozondar ◽  
D Vigneswaran ◽  
Shobhit K. Patel ◽  
...  

Abstract We present a multichannel sensor for the simultaneous monitoring of three different samples. established from a one-dimensional photonic crystal, this device is formed by an alternating layer of silicon dioxide (SiO2) and titanium dioxide (TiO2) with three defect layers containing the samples to be monitored. Numerical studies claim that three transmission peaks appear in the bandgap, these transmission peaks are caused by the three samples infiltrated in the defect layers. In real-time detection purposes, it is possible to exploit these transmission peaks. In addition, peak frequencies have the advantage of being susceptible to sample concentrations. With this photonic structure, a sensitivity of 800 nm per unit of refractive index (RIU) is reached.


Sensors ◽  
2019 ◽  
Vol 19 (18) ◽  
pp. 3923
Author(s):  
Jandieri ◽  
Yasumoto ◽  
Pistora ◽  
Erni

A self-contained formulation for analyzing electromagnetic scattering by a significant class of planar gratings composed of plasmonic nanorods, which were infinite length along their axes, is presented. The procedure for the lattice sums technique was implemented in a cylindrical harmonic expansion method based on the generalized reflection matrix approach for full-wave scattering analysis of plasmonic gratings. The method provided a high computational efficiency and can be considered as one of the best-suited numerical tools for the optimization of plasmonic sensors and plasmonic guiding devices both having a planar geometry. Although the proposed formalism can be applied to analyze a wide class of plasmonic gratings, three configurations were studied in the manuscript. Firstly, a multilayered grating of silver nanocylinders formed analogously to photonic crystals was considered. In the region far from the resonances of a single plasmonic nanocylinder, the structure showed similar properties compared to conventional photonic crystals. When one or a few nanorods were periodically removed from the original crystal, thus forming a crystal with defects, a new band was formed in the spectral responses because of the resonant tunneling through the defect layers. The rigorous formulation of plasmonic gratings with defects was proposed for the first time. Finally, a plasmonic planar grating of metal-coated dielectric nanorods coupled to the dielectric slab was investigated from the viewpoint of design of a refractive index sensor. Dual-absorption bands attributable to the excitation of the localized surface plasmons were studied, and the near field distributions were given in both absorption bands associated with the resonances on the upper and inner surfaces of a single metal-coated nanocylinder. Resonance in the second absorption band was sensitive to the refractive index of the background medium and could be useful for the design of refractive index sensors. Also analyzed was a phase-matching condition between the evanescent space-harmonics of the plasmonic grating and the guided modes inside the slab, leading to a strong coupling.


Sign in / Sign up

Export Citation Format

Share Document