In Situ Deposition of Highly Dispersed Pt Nanoparticles on Carbon Black Electrode for Oxygen Reduction

2006 ◽  
Vol 153 (7) ◽  
pp. A1261 ◽  
Author(s):  
Yuyan Shao ◽  
Geping Yin ◽  
Jiajun Wang ◽  
Yunzhi Gao ◽  
Pengfei Shi
ACS Catalysis ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 8453-8463 ◽  
Author(s):  
Yu Lei Wang ◽  
Sadi Gurses ◽  
Noah Felvey ◽  
Alexey Boubnov ◽  
Samuel S. Mao ◽  
...  

2015 ◽  
Vol 68 (6) ◽  
pp. 987 ◽  
Author(s):  
Dengping Hu ◽  
Guangyao Zhang ◽  
Juan Wang ◽  
Qin Zhong

The poor kinetics of oxygen reduction reaction (ORR) in neutral media and ambient temperature limit the performance of microbial fuel cells (MFCs). So higher-performing, low-cost oxygen reduction catalysts play a key role in power output. Through direct nanoparticle nucleation and growth on carbon black, a nanocomposite of manganese cobaltite and carbon black (in situ-MnCo2O4/C) was synthesized via a facile hydrothermal method. Subsequently, the in situ-MnCo2O4/C samples were characterized. The results show that the MnCo2O4 nanoparticles with a crystalline spinel structure are well dispersed on carbon black. Electrochemical measurements reveal that in situ-MnCo2O4/C demonstrates excellent ORR catalytic activity, which may account for the synergetic coupling effect between MnCo2O4 and carbon black. The ORR on as-prepared in situ-MnCo2O4/C hybrid mainly favours a direct 4-electron reaction pathway in alkaline solution. Moreover, in situ-MnCo2O4/C was used as an alternative catalyst for ORR in dual-chamber MFC. The obtained maximum power density is 545 mW m–2, which is far higher than that of the plain cathode (Pmax = 214 mW m–2) and slightly lower than that of commercial Pt/C catalyst (Pmax = 689 mW m–2). This study implies that in situ-MnCo2O4/C nanocomposite is an efficient and cost-effective cathode catalyst for practical MFC application.


2015 ◽  
Vol 17 (16) ◽  
pp. 10767-10773 ◽  
Author(s):  
Anqi Zhao ◽  
Justus Masa ◽  
Wei Xia

Highly dispersed TiO2 on nitrogen-doped carbon nanotubes is used to tackle the carbon corrosion problem when used as support for Pt in electrocatalysis.


2018 ◽  
Vol 6 (31) ◽  
pp. 15074-15082 ◽  
Author(s):  
Xuejun Tang ◽  
Yachao Zeng ◽  
Longsheng Cao ◽  
Limeng Yang ◽  
Zhiqiang Wang ◽  
...  

Ultrafine Pt nanoparticles decorated 3D graphene-based hierarchical architecture demonstrates superior electrochemical performance in fuel cell.


2014 ◽  
Vol 4 (9) ◽  
pp. 3053-3063 ◽  
Author(s):  
James R. Gallagher ◽  
Tao Li ◽  
Haiyan Zhao ◽  
Jingjing Liu ◽  
Yu Lei ◽  
...  

In situ synchrotron diffraction in H2 reveals structural and microstructural details of supported 1–2 nm Pt nanoparticles.


Catalysts ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 862
Author(s):  
Rui Yao ◽  
Jun Gu ◽  
Haitong He ◽  
Tao Yu

A facile strategy is proposed to synthesize boron-doped ECP600 carbon black (B-ECP600), and the catalyst of Pt supported on boron-doped ECP600 (Pt/B-ECP600) shows smaller particle sizes and a higher electrochemical surface area (95.62 m2·gPt−1) and oxygen reduction reaction activity (0.286 A·mgPt−1 for mass activity; 0.299 mA·cm−2 for area specific activity) compared to the catalyst of Pt supported on ECP600 (Pt/ECP600). The results show that the boron doping of the carbon supports plays an important role in controlling the size and dispersion of Pt nanoparticles and the O2 adsorption/dissociation of the oxygen reduction reaction. A further accelerated durability test proves that boron doping can greatly enhance the stability of carbon support and thus improves the electrochemical performance of the catalyst during the long-time running. All these results suggest boron-doped carbon has great potential for application in fuel cells.


Sign in / Sign up

Export Citation Format

Share Document