A high accuracy linear rate meter

1975 ◽  
Vol 39 (2) ◽  
pp. 327-330
Author(s):  
C. R. Wyss

By implementing analog computer techniques using digital circuits, an instantaneous rate meter was built with approximately 100 times the accuracy of commercially available rate meters. The circuit is accurate to within +/- 0.2 events/min over a range of rates of 0.2–900 epm. Modifications can be made to provide a digital display of rate. The circuit design techniques used in developing the rate meter may be used to generate a wide variety of functions of time with very high accuracy.

Author(s):  
Camelia Hora ◽  
Stefan Eichenberger

Abstract Due to the development of smaller and denser manufacturing processes most of the hardware localization techniques cannot keep up satisfactorily with the technology trend. There is an increased need in precise and accurate software based diagnosis tools to help identify the fault location. This paper describes the software based fault diagnosis method used within Philips, focusing on the features developed to increase its accuracy.


1996 ◽  
Vol 176 ◽  
pp. 53-60 ◽  
Author(s):  
J.-F. Donati

In this paper, I will review the capabilities of magnetic imaging (also called Zeeman-Doppler imaging) to reconstruct spot distributions of surface fields from sets of rotationnally modulated Zeeman signatures in circularly polarised spectral lines. I will then outline a new method to measure small amplitude magnetic signals (typically 0.1% for cool active stars) with very high accuracy. Finally, I will present and comment new magnetic images reconstructed from data collected in 1993 December at the Anglo-Australian Telescope (AAT).


2014 ◽  
Vol 984-985 ◽  
pp. 67-72 ◽  
Author(s):  
R. Clifford Benjamin Raj ◽  
B. Anand Ronald ◽  
A. Velayudham ◽  
Prasmit Kumar Nayak

Deep-hole drilling is a process in which the hole length will be very high when compared to diameter of the drill hole (i.e. length to diameter ratio will be greater than 5). Drilling a deep hole with very high accuracy is difficult process. The current project is about the production of deep hole with the aim to produce a chip which is not a continuous chip and also not a powdery chip. These conditions can be attained by varying the spindle speed and the tool feed rate.


2001 ◽  
Vol 35 (4) ◽  
pp. 33-45 ◽  
Author(s):  
Peter Hogarth

Between 23rd and 25th July 2001 GeoSwath, a high specification shallow water wide swath bathymetry system, was used to survey the entire Portsmouth NH Harbor area. This paper deals with the results of this survey, illustrating the potential for significant reductions in the high costs, which have prevented widespread proliferation of Swath Bathymetry systems to date. Data, including a complete DTM gridded to 1 m resolution, will be presented and discussed in detail. These results show that the system is very easy to set up and use, requires greatly reduced boat and processing time, whilst offering high accuracy and very high coverage and resolution when used in a real-world survey of a dynamic harbor environment.


2008 ◽  
Vol 134 (4) ◽  
pp. A-362
Author(s):  
Emilia Sugai ◽  
María Laura Moreno ◽  
Hui Jer Hwang ◽  
Adriana Crivelli ◽  
Fabio Nachman ◽  
...  

Author(s):  
Tadeusz Sobczyk ◽  
Michał Radzik ◽  
Natalia Radwan-Pragłowska

Purpose To identify the properties of novel discrete differential operators of the first- and the second-order for periodic and two-periodic time functions. Design/methodology/approach The development of relations between the values of first and second derivatives of periodic and two-periodic functions, as well as the values of the functions themselves for a set of time instants. Numerical tests of discrete operators for selected periodic and two-periodic functions. Findings Novel discrete differential operators for periodic and two-periodic time functions determining their first and the second derivatives at very high accuracy basing on relatively low number of points per highest harmonic. Research limitations/implications Reduce the complexity of creation difference equations for ordinary non-linear differential equations used to find periodic or two-periodic solutions, when they exist. Practical implications Application to steady-state analysis of non-linear dynamic systems for solutions predicted as periodic or two-periodic in time. Originality/value Identify novel discrete differential operators for periodic and two-periodic time functions engaging a large set of time instants that determine the first and second derivatives with very high accuracy.


2001 ◽  
Vol 692 ◽  
Author(s):  
L. Bellaiche ◽  
A. Al-Yacoub ◽  
N. A. Modine ◽  
E. D. Jones

AbstractThe construction and the parameters of a new-strain dependent empirical pseudopotentials method are described and provided, respectively. This method is shown to reproduce with a very high accuracy some observed unusual properties in various complex anion-mixed nitride alloys. This method is also used to predict and understand anomalous effects that remain to be experimentally discovered in Ga1−yInyAs1−xNx quaternaries and GaAs0.5−xP0.5−xN2x solid solutions.


Sign in / Sign up

Export Citation Format

Share Document