scholarly journals SURGNET: An Integrated Surgical Data Transmission System for Telesurgery

2009 ◽  
Vol 2009 ◽  
pp. 1-9 ◽  
Author(s):  
Sriram Natarajan ◽  
Aura Ganz

Remote surgery information requires quick and reliable transmission between the surgeon and the patient site. However, the networks that interconnect the surgeon and patient sites are usually time varying and lossy which can cause packet loss and delay jitter. In this paper we propose SURGNET, a telesurgery system for which we developed the architecture, algorithms and implemented it on a testbed. The algorithms include adaptive packet prediction and buffer time adjustment techniques which reduce the negative effects caused by the lossy and time varying networks. To evaluate the proposed SURGNET system, at the therapist site, we implemented a therapist panel which controls the force feedback device movements and provides image analysis functionality. At the patient site we controlled a virtual reality applet built in Matlab. The varying network conditions were emulated using NISTNet emulator. Our results show that even for severe packet loss and variable delay jitter, the proposed integrated synchronization techniques significantly improve SURGNET performance.

Repositor ◽  
2020 ◽  
Vol 2 (1) ◽  
pp. 15
Author(s):  
Inung Bagus Prasetyo ◽  
Mahar Faiqurahman ◽  
Zamah Sari

The WSN network is increasingly gaining attention because of the potential for new and attractive solutions in the field of industrial automation, asset processing, environmental preparation and others. But there are some problems in building the WSN network. Sensor nodes must manage small, cost-effective, low-resource, node sensors must be managed properly with WSN networks Managing WSN networks, can be done by controlling sensor nodes such as giving commands to data transmission activities and monitoring to determine the condition of sensor nodes. The MQTT protocol with the type of publishing / subscription communication is designed with characteristics similar to the characteristics of the WSN network, which are simple, lightweight, energy efficient and easy to implement.In this study, a server will be implemented that can control and monitor the sensors of the WSN network node using the MQTT protocol. Then RTT parameters are used, Qo parameters include Delay, Jitter, Throughput, Packet Loss and sensor node memory condition parameters when using the MQTT protocol. The RTT and QoS scenarios use variations in data size of 16,32,48,64,80 and 96 bytes. Monitoring memory nodes, performing for 1 minute with a total of 30 data transmissions. The RTT parameter testing results are quite stable. QoS testing is very good with stable delay, jitter, increasing throughput, and 0% of data lost when packet loss testing. The Test Memory node sensor, shows erratic results.  


2018 ◽  
Vol 31 (2) ◽  
pp. 222
Author(s):  
Maan Y. Anad Alsaleem ◽  
Naors Y. Anad Alsaleem ◽  
Nawfal Ali Zakar

     NS-2 is a tool to simulate networks and events that occur per packet sequentially based on time and are widely used in the research field. NS-2 comes with NAM (Network Animator) that produces a visual representation it also supports several simulation protocols. The network can be tested end-to-end. This test includes data transmission, delay, jitter, packet-loss ratio and throughput. The Performance Analysis simulates a virtual network and tests for transport layer protocols at the same time with variable data and analyzes simulation results based on the network simulator NS-2.


2016 ◽  
Vol 26 (1) ◽  
pp. 7
Author(s):  
Jose Carlos Tavara Carbajal

RESUMENEste documento tiene como objetivo analizar el comportamiento de la calidad del servicio del protocolo IPv6 sobre el tráfico de video, para esto se realizó sobre un entorno real y se llevó acabo el análisis de resultados a través de un software estadístico de control del tráfico.Palabras Clave.-  Calidad de Servicio, Ancho de Banda, Retardo, Fluctuación de Retardo, Pérdidas de Paquetes.ABSTRACTThis paper has aimed to analyze of the service quality of the IPv6 protocol on video traffic, this was about a real environment and was conducted analysis of results through statistical traffic control software. Key words- Quality of Service, Bandwidth, End to end delay, Jitter, Packet loss.


2016 ◽  
Vol 26 (1) ◽  
pp. 1
Author(s):  
Jose Carlos Tavara Carbajal

Este documento tiene como objetivo analizar el comportamiento de la calidad del servicio del protocolo IPv6 sobre el tráfico de video, para esto se realizó sobre un entorno real y se llevó acabo el análisis de resultados a través de un software estadístico de control del tráfico.Palabras Clave.-  Calidad de Servicio, Ancho de Banda, Retardo, Fluctuación de Retardo, Pérdidas de Paquetes.ABSTRACT  This paper has aimed to analyze of the service quality of the IPv6 protocol on video traffic, this was about a real environment and was conducted analysis of results through statistical traffic control software.  Key words.- Quality of Service, Bandwidth, End to end delay, Jitter, Packet loss.


2016 ◽  
Vol 26 (1) ◽  
pp. 7
Author(s):  
Jose Carlos Tavara Carbajal

RESUMENEste documento tiene como objetivo analizar el comportamiento de la calidad del servicio del protocolo IPv6 sobre el tráfico de video, para esto se realizó sobre un entorno real y se llevó acabo el análisis de resultados a través de un software estadístico de control del tráfico.Palabras Clave.-  Calidad de Servicio, Ancho de Banda, Retardo, Fluctuación de Retardo, Pérdidas de Paquetes.ABSTRACTThis paper has aimed to analyze of the service quality of the IPv6 protocol on video traffic, this was about a real environment and was conducted analysis of results through statistical traffic control software. Keywords- Quality of Service, Bandwidth, End to end delay, Jitter, Packet loss.


2021 ◽  
Vol 105 (4) ◽  
pp. 3819-3833
Author(s):  
Haili Guo ◽  
Qian Yin ◽  
Chengyi Xia ◽  
Matthias Dehmer

Sign in / Sign up

Export Citation Format

Share Document