scholarly journals Differential Difference Current Conveyor Transconductance Amplifier: A New Analog Building Block for Signal Processing

2011 ◽  
Vol 2011 ◽  
pp. 1-10 ◽  
Author(s):  
Neeta Pandey ◽  
Sajal K. Paul
Keyword(s):  
Signal Processing ◽  
Building Block ◽  
Current Mode ◽  
Cmos Technology ◽  
Current Conveyor ◽  
Pspice Simulations ◽  
Transconductance Amplifier ◽  
Multifunction Filter ◽  
And Performance ◽  
A Current

A new active building block for analog signal processing, namely, differential difference current conveyor transconductance amplifier (DDCCTA), is presented, and performance is checked through PSPICE simulations which show the usability of the proposed element is up to 201 MHz. The proposed block is implemented using 0.25 μm TSMC CMOS technology. Some of the applications are presented using the proposed DDCCTA, namely, a voltage mode multifunction filter, a current mode universal filter, an oscillator, current and voltage amplifiers, and grounded inductor simulator. The feasibility of DDCCTA and its applications is confirmed via PSPICE simulations.

scholarly journals VM and CM Universal Filters Based on Single DVCCTA

2011 ◽  
Vol 2011 ◽  
pp. 1-7 ◽  
Author(s):  
Neeta Pandey ◽  
Sajal K. Paul
Keyword(s):  
Building Block ◽  
Current Mode ◽  
Cmos Technology ◽  
Current Conveyor ◽  
Spice Simulation ◽  
Transconductance Amplifier ◽  
Low Sensitivity ◽  
Differential Voltage Current Conveyor ◽  
A Current ◽  
Sensitivity Performance

A universal voltage-mode filter (VM) and a current-mode filter (CM) based on recently proposed active building block, namely, differential voltage current conveyor transconductance amplifier (DVCCTA) are proposed. Both the circuits use a single DVCCTA, two capacitors, and a single resistor. The filters enjoy low-sensitivity performance and low component spread and exhibit electronic tunability of filter parameters via bias currents of DVCCTA. SPICE simulation using 0.25 μm TSMC CMOS technology parameters is included to show the workability of the proposed circuits.

scholarly journals A Flux Controlled Memristor using 90nm Technology

2021 ◽  
pp. 1-6
Author(s):  
B.T. Krishna ◽  
◽  
Shaik. mohaseena Salma ◽  
Keyword(s):  
Power Supply ◽  
Power Dissipation ◽  
Power Efficiency ◽  
Current Mode ◽  
Cmos Technology ◽  
Theoretical Simulation ◽  
Transconductance Amplifier ◽  
Higher Power ◽  
Static Power ◽  
A Current

A flux-controlled memristor using complementary metal–oxide–(CMOS) structure is presented in this study. The proposed circuit provides higher power efficiency, less static power dissipation, lesser area, and can also reduce the power supply by using CMOS 90nm technology. The circuit is implemented based on the use of a second-generation current conveyor circuit (CCII) and operational transconductance amplifier (OTA) with few passive elements. The proposed circuit uses a current-mode approach which improves the high frequency performance. The reduction of a power supply is a crucial aspect to decrease the power consumption in VLSI. An offered emulator in this proposed circuit is made to operate incremental and decremental configurations well up to 26.3 MHZ in cadence virtuoso platform gpdk using 90nm CMOS technology. proposed memristor circuit has very little static power dissipation when operating with ±1V supply. Transient analysis, memductance analysis, and dc analysis simulations are verified practically with the Experimental demonstration by using ideal memristor made up of ICs AD844AN and CA3080, using multisim which exhibits theoretical simulation are verified and discussed.

scholarly journals Gm-Realization of Controlled-Gain Current Follower Transconductance Amplifier

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Worapong Tangsrirat
Keyword(s):  
Current Mode ◽  
Cmos Technology ◽  
Current Transfer ◽  
Biquad Filter ◽  
Transconductance Amplifier ◽  
Current Follower ◽  
Dc Bias ◽  
Simulation Results ◽  
Supply Voltages ◽  
A Current

This paper describes the conception of the current follower transconductance amplifier (CFTA) with electronically and linearly current tunable. The newly modified element is realized based on the use of transconductance cells (Gms) as core circuits. The advantage of this element is that the current transfer ratios (iz/ipandix/iz) can be tuned electronically and linearly by adjusting external DC bias currents. The circuit is designed and analyzed in 0.35 μm TSMC CMOS technology. Simulation results for the circuit with ±1.25 V supply voltages show that it consumes only 0.43 mw quiescent power with 70 MHz bandwidth. As an application example, a current-mode KHN biquad filter is designed and simulated.

scholarly journals Current Controlled Differential Difference Current Conveyor Transconductance Amplifier and Its Application as Wave Active Filter

2013 ◽  
Vol 2013 ◽  
pp. 1-11 ◽  
Author(s):  
Neeta Pandey ◽  
Praveen Kumar ◽  
Jaya Choudhary
Keyword(s):  
Signal Processing ◽  
Cutoff Frequency ◽  
Cmos Technology ◽  
Bias Current ◽  
Active Filter ◽  
Current Conveyor ◽  
Third Order ◽  
Transconductance Amplifier ◽  
Wave Filter ◽  
Order Butterworth Filter

This paper proposes current controlled differential difference current conveyor transconductance amplifier (CCDDCCTA), a new active building block for analog signal processing. The functionality of the proposed block is verified via SPICE simulations using 0.25 μm TSMC CMOS technology parameters. The usefulness of the proposed element is demonstrated through an application, namely, wave filter. The CCDDCCTA-based wave equivalents are developed which use grounded capacitors and do not employ any resistors. The flexibility of terminal characteristics is utilized to suggest an alternate wave equivalents realization scheme which results in compact realization of wave filter. The feasibility of CCDDCCTA-based wave active filter is confirmed through simulation of a third-order Butterworth filter. The filter cutoff frequency can be tuned electronically via bias current.

scholarly journals Current Mode Full-Wave Rectifier Based on a Single MZC-CDTA

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Neeta Pandey ◽  
Rajeshwari Pandey
Keyword(s):  
Current Mode ◽  
Cmos Technology ◽  
Spice Simulation ◽  
Full Wave ◽  
Transconductance Amplifier ◽  
Current Difference ◽  
A Current

This paper presents a current mode full-wave rectifier based on single modified Z copy current difference transconductance amplifier (MZC-CDTA) and two switches. The circuit is simple and is suitable for IC implementation. The functionality of the circuit is verified with SPICE simulation using 0.35 μm TSMC CMOS technology parameters.

scholarly journals A Flux Controlled Memristor using 90nm Technology

2021 ◽  
Vol 1 (2) ◽  
pp. 1-7
Author(s):  
Krishna B.T. ◽  
mohaseena Salma Shaik.
Keyword(s):  
Power Supply ◽  
Power Dissipation ◽  
Power Efficiency ◽  
Current Mode ◽  
Cmos Technology ◽  
Theoretical Simulation ◽  
Transconductance Amplifier ◽  
Higher Power ◽  
Static Power ◽  
A Current

A flux-controlled memristor using complementary metal–oxide–(CMOS) structure is presented in this study. The proposed circuit provides higher power efficiency, less static power dissipation, lesser area, and can also reduce the power supply by using CMOS 90nm technology. The circuit is implemented based on the use of a second-generation current conveyor circuit (CCII) and operational transconductance amplifier (OTA) with few passive elements. The proposed circuit uses a current-mode approach which improves the high-frequency performance. The reduction of a power supply is a crucial aspect to decrease the power consumption in VLSI. An offered emulator in this proposed circuit is made to operate incremental and decremental configurations well up to 26.3 MHZ in cadence virtuoso platform gpdk using 90nm CMOS technology. proposed memristor circuit has very little static power dissipation when operating with ±1V supply. Transient analysis, memductance analysis, and dc analysis simulations are verified practically with the Experimental demonstration by using ideal memristor made up of ICs AD844AN and CA3080, using multisim which exhibits theoretical simulation are verified and discussed.

CDBA based current instrumentation amplifier

2016 ◽  
Vol 4 ◽  
pp. 11 ◽  
Author(s):  
Priyanka Gupta ◽  
Kunal Gupta ◽  
Neeta Pandey ◽  
Rajeshwari Pandey
Keyword(s):  
Current Mode ◽  
Instrumentation Amplifier ◽  
Pspice Simulations ◽  
Differential Gain ◽  
Novel Method ◽  
Current Difference ◽  
A Current

This paper presents a novel method to realize a current mode instrumentation amplifier (CMIA) through CDBA (Current difference Buffered Amplifier). It employs two CDBAs and two resistors to obtain desired functionality. Further, it does not require any resistor matching. The gain can be set according to the resistor values. It offers high differential gain and a bandwidth, which is independent of gain. The working of the circuit is verified through PSPICE simulations using CFOA IC based CDBA realization.

Sign in / Sign up

Export Citation Format

Share Document