scholarly journals Current Mode Biquad Filter with Minimum Component Count

2011 ◽  
Vol 2011 ◽  
pp. 1-7 ◽  
Author(s):  
Bhartendu Chaturvedi ◽  
Sudhanshu Maheshwari
Keyword(s):  
Current Mode ◽  
Pass Band ◽  
Current Sensing ◽  
Pass Filter ◽  
Biquad Filter ◽  
Low Pass ◽  
Biquadratic Filter ◽  
Band Pass ◽  
Low Sensitivity ◽  
Differential Voltage Current Conveyor

The paper presents a new current mode biquadratic filter with one input and three outputs using differential voltage current conveyor (DVCC) and four passive components. The proposed circuit can simultaneously realize low-pass, band-pass, and high-pass filter functions without changing the circuit topology and passive elements. The circuit exhibits a good frequency performance and low-sensitivity figures. PSPICE simulation using 0.5 μm CMOS parameters are given to validate the proposed circuit. The circuit provides a simple yet novel solution to the current-mode filtering after appropriate incorporation of current sensing elements in form of current buffers.

A New DVCC+ Based Second-Order Current-Mode Universal Filter Consisting of Only Grounded Capacitors

2017 ◽  
Vol 26 (09) ◽  
pp. 1750130 ◽  
Author(s):  
Ahmet Abaci ◽  
Erkan Yuce
Keyword(s):  
Notch Filter ◽  
Current Mode ◽  
Second Order ◽  
Pass Band ◽  
Current Conveyors ◽  
Universal Filter ◽  
Pass Filter ◽  
Low Pass ◽  
Band Pass ◽  
High Output Impedance

In this paper, a new second-order current-mode universal filter using only two plus-type differential voltage current conveyors, three resistors and two grounded capacitors is proposed. The proposed circuit with two identical inputs and three outputs can simultaneously provide second-order high output impedance low-pass, band-pass and notch filter responses. Also, it can realize high-pass and all-pass filter responses with interconnection of relevant output currents. It can be easily tuned electronically. It can be operated properly at high frequencies. A number of simulations based on SPICE program and an experimental test are achieved in order to demonstrate the performance of the proposed filter.

CURRENT-MODE ACTIVE-C FILTER EMPLOYING REDUCED NUMBER OF CCCII+s

2007 ◽  
Vol 16 (04) ◽  
pp. 507-516 ◽  
Author(s):  
SHAHRAM MINAEI ◽  
ERKAN YUCE
Keyword(s):  
Current Mode ◽  
Pass Band ◽  
Passive Component ◽  
Resistorless Filter ◽  
Low Pass ◽  
Component Matching ◽  
Band Pass ◽  
High Output Impedance ◽  
Quality Factor Q ◽  
High Pass

In this paper, a universal current-mode second-order active-C filter for simultaneously realizing low-pass, band-pass and high-pass responses is proposed. The presented filter employs only three plus-type second-generation current-controlled conveyors (CCCII+s). This filter needs no critical active and passive component matching conditions and no additional active and passive elements for realizing high output impedance low-pass, band-pass and high-pass characteristics. The angular resonance frequency (ω0) and quality factor (Q) of the proposed resistorless filter can be tuned electronically. To verify the theoretical analysis and to exhibit the performance of the proposed filter, it is simulated with SPICE program.

scholarly journals Transadmittance Type Universal Current-Mode Biquad Filter Using VDTAs

2014 ◽  
Vol 2014 ◽  
pp. 1-4 ◽  
Author(s):  
Dinesh Prasad ◽  
Mayank Srivastava ◽  
D. R. Bhaskar
Keyword(s):  
Process Parameters ◽  
Current Mode ◽  
Angular Frequency ◽  
Pspice Simulations ◽  
Biquad Filter ◽  
Low Pass ◽  
Single Input ◽  
Band Pass ◽  
Transconductance Amplifiers ◽  
High Pass

A new resistorless single-input-multi-output (SIMO) universal transadmittance (TA) type filter employing two voltage differencing transconductance amplifiers (VDTA) and two grounded capacitors is proposed. The proposed topology realizes simultaneously low pass (LP), high pass (HP), and band pass (BP) filter functions. Band rejects (BR) and all pass (AP) filters are also realizable through appropriate connections of currents. The proposed configuration also offers independent control of natural angular frequency (ω0) and bandwidth (BW) and low active and passive sensitivities. The workability of proposed configuration has been demonstrated through PSPICE simulations with TSMC CMOS 0.18 μm process parameters.

scholarly journals Simple Simulated Inductor, Low-Pass/Band-Pass Filter and Sinusoidal Oscillator Using OTRA

2016 ◽  
Vol 07 (03) ◽  
pp. 83-99 ◽  
Author(s):  
Raj Senani ◽  
Abdhesh Kumar Singh ◽  
Ashish Gupta ◽  
Data Ram Bhaskar
Keyword(s):  
Pass Band ◽  
Band Pass Filter ◽  
Pass Filter ◽  
Sinusoidal Oscillator ◽  
Low Pass ◽  
Band Pass

scholarly journals Voltage Mode Universal Biquad Using CCCII

2011 ◽  
Vol 2011 ◽  
pp. 1-5 ◽  
Author(s):  
Ashish Ranjan ◽  
Sajal K. Paul
Keyword(s):  
Pass Band ◽  
Current Conveyors ◽  
Ic Design ◽  
Passive Components ◽  
Voltage Mode ◽  
Single Output ◽  
Low Pass ◽  
Minimum Number ◽  
Band Pass ◽  
Low Sensitivity

This paper proposes a multi-input single-output (MISO) second-order active-C voltage mode (VM) universal filter using two second-generation current-controlled current conveyors (CCCIIs) and two equal-valued capacitors. The proposed circuit realizes low pass, band pass, high pass, all pass, and notch responses from the same topology. The filter uses-minimum number of passive components and no resistor which is suitable for IC Design. The filter enjoys low-sensitivity performance and exhibits electronic and orthogonal tunability of pole frequency () and quality factor () via bias current of CCCIIs. PSPICE simulation results confirm the theory.

Programmable Universal Filters Using Current Conveyor Transconductance Amplifiers

2017 ◽  
Vol 26 (07) ◽  
pp. 1750121 ◽  
Author(s):  
Thanat Nonthaputha ◽  
Montree Kumngern
Keyword(s):  
Transfer Functions ◽  
Current Mode ◽  
Current Conveyor ◽  
Pass Band ◽  
Cmos Process ◽  
Low Pass ◽  
Band Pass ◽  
Transconductance Amplifiers ◽  
Biquadratic Filters ◽  
High Pass

This paper presents new programmable universal biquadratic filters using current conveyor transconductance amplifiers (CCTAs) by which both voltage- and current-mode filters can be obtained. The proposed filters use second-generation current conveyor (CCII) which is the first stage of CCTA to operate as current conveyor analog switch (CCAS) and this CCAS will be used to program the filtering functions such as low-pass, high-pass, band-pass, band-stop and all-pass filters. Unlike previous universal filters, the filtering functions of the proposed filters can be programmed using the bias currents of CCTAs without changing any input and output connections. The natural frequency and quality factor of all filtering functions can be controlled electronically and orthogonally using the bias currents of transconductance amplifiers. Also gain response of all transfer functions can be adjusted. The active and passive sensitivities of the filters are low. The proposed programmable filters have been simulated using 0.18[Formula: see text][Formula: see text]m CMOS process from TSMC. PSPICE simulation results are included to confirm workability of the proposed circuits.

A NEW TUNABLE FLOATING CMOS FDNR AND ELLIPTIC FILTER APPLICATIONS

2010 ◽  
Vol 19 (08) ◽  
pp. 1641-1650 ◽  
Author(s):  
FIRAT KAÇAR
Keyword(s):  
Integrated Circuit ◽  
Current Mode ◽  
Band Pass Filter ◽  
Mos Transistors ◽  
Pass Filter ◽  
Elliptic Filter ◽  
Low Pass ◽  
Band Pass ◽  
Fifth Order ◽  
A Current

A new tunable CMOS FDNR circuit is proposed. The circuit is based on the transcapacitive gyrator approach with both transcapacitive stages realized by MOS transistors configuration. This FDNR element lends itself well to the design of low-pass ladder filters and its use will result in a more efficient integrated circuit implementation than filters that simulate floating inductors utilizing resistive gyrators. The applications of FDNR to realize a current-mode fifth-order elliptic filter and current mode sixth-order elliptic band-pass filter are given. The proposed FDNR is simulated using CMOS TSMC 0.35 μm technology. Simulation results are given to confirm the theoretical analysis.

CDTAs Based Current-Mode Universal Biquad Filters with Orthogonal Control of Quality Factor and Pole Frequency

2013 ◽  
Vol 787 ◽  
pp. 501-507
Author(s):  
Saksit Summart ◽  
Chanchai Thongsopa
Keyword(s):  
Quality Factor ◽  
Integrated Circuit ◽  
Current Mode ◽  
Pass Band ◽  
Cascade Connection ◽  
Low Pass ◽  
Band Pass ◽  
High Output Impedance ◽  
Further Development ◽  
High Pass

This article presents current-mode universal biquad filters based on CDTAs. The filter circuits using four CDTAs and two grounded capacitors which are able to provide low-pass, high-pass, band-pass, band-reject and all-pass functions. The pole frequency can be orthogonally controlled from quality factor and the circuits have high output impedance appropriate for cascade connection application in current mode which is capable to directly drive load. This qualification is very appropriate for further development into an integrated circuit. The results of PSPICE simulation program are corresponding to the theoretical analysis.

Sign in / Sign up

Export Citation Format

Share Document