scholarly journals Comparative Study of Laterite and Bentonite Based Organoclays: Implications of Hydrophobic Compounds Remediation from Aqueous Solutions

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Muhammad Nafees ◽  
Amir Waseem ◽  
Abdur Rehman Khan

Four cost effective organoclays were synthesized, characterized, and studied for the sorption of hydrophobic compounds (edible oil/grease and hydrocarbon oil) from aqueous solutions. Organoclays were prepared by cation exchange reaction of lattice ions (present onto the surface of laterite and bentonite clay minerals) with two surfactants, hexadecyl trimethyl ammonium chloride (HDTMA-Cl) and tetradecyl trimethyl ammonium bromide (TDTMA-Br). Fourier transform infrared spectroscopy and scanning electron microscopy were used for the characterization of synthesized organoclays. It was found that the amount of surfactant loading and the nature of the surfactant molecules used in the syntheses of organoclay strongly affect the sorption capacity of the clay mineral. Further, it was found that both the laterite and bentonite based organoclays efficiently removed the edible and hydrocarbon oil content from lab prepared emulsions; however, the adsorption capacity of clay mineral was greatly influenced by the nature of hydrophobic compounds as well.

Author(s):  
W. W. Barker ◽  
W. E. Rigsby ◽  
V. J. Hurst ◽  
W. J. Humphreys

Experimental clay mineral-organic molecule complexes long have been known and some of them have been extensively studied by X-ray diffraction methods. The organic molecules are adsorbed onto the surfaces of the clay minerals, or intercalated between the silicate layers. Natural organo-clays also are widely recognized but generally have not been well characterized. Widely used techniques for clay mineral identification involve treatment of the sample with H2 O2 or other oxidant to destroy any associated organics. This generally simplifies and intensifies the XRD pattern of the clay residue, but helps little with the characterization of the original organoclay. Adequate techniques for the direct observation of synthetic and naturally occurring organoclays are yet to be developed.


2006 ◽  
Vol 1 (2) ◽  
Author(s):  
P. Literathy ◽  
M. Quinn

Petroleum and its refined products are considered the most complex contaminants frequently impacting the environment in significant quantities. They have heterogeneous chemical composition and alterations occur during environmental weathering. No single analytical method exists to characterize the petroleum-related environmental contamination. For monitoring, the analytical approaches include gravimetric, spectrometric and chromatographic methods having significant differences in their selectivity, sensitivity and cost-effectiveness. Recording fluorescence fingerprints of the cyclohexane extracts of the water, suspended solids, sediment or soil samples and applying appropriate statistical evaluation (e.g. by correlating the concatenated emission spectra of the fingerprints of the samples with arbitrary standards (e.g. petroleum products)), provides a powerful, cost-effective analytical tool for characterization of the type of oil pollution and detecting the most harmful aromatic components of the petroleum contaminated matrix. For monitoring purposes, the level of the contamination can be expressed as the equivalent concentration of an appropriate characteristic standard, based on the fluorescence intensities at the relevant characteristic wavelengths. These procedures are demonstrated in the monitoring of petroleum-related pollution in the water and suspended sediment in the Danube river basin


2018 ◽  
Vol 9 (1) ◽  
pp. 101-108 ◽  
Author(s):  
Shubhangi J. Mane-Gavade ◽  
Sandip R. Sabale ◽  
Xiao-Ying Yu ◽  
Gurunath H. Nikam ◽  
Bhaskar V. Tamhankar

Introduction: Herein we report the green synthesis and characterization of silverreduced graphene oxide nanocomposites (Ag-rGO) using Acacia nilotica gum for the first time. Experimental: We demonstrate the Hg2+ ions sensing ability of the Ag-rGO nanocomposites form aqueous medium. The developed colorimetric sensor method is simple, fast and selective for the detection of Hg2+ ions in aqueous media in presence of other associated ions. A significant color change was noticed with naked eye upon Hg2+ addition. The color change was not observed for cations including Sr2+, Ni2+, Cd2+, Pb2+, Mg2+, Ca2+, Fe2+, Ba2+ and Mn2+indicating that only Hg2+ shows a strong interaction with Ag-rGO nanocomposites. Under the most suitable condition, the calibration plot (A0-A) against concentration of Hg2+ was linear in the range of 0.1-1.0 ppm with a correlation coefficient (R2) value 0.9998. Results & Conclusion The concentration of Hg2+ was quantitatively determined with the Limit of Detection (LOD) of 0.85 ppm. Also, this method shows excellent selectivity towards Hg2+ over nine other cations tested. Moreover, the method offers a new cost effective, rapid and simple approach for the detection of Hg2+ in water samples.


Sign in / Sign up

Export Citation Format

Share Document