scholarly journals Influence of Intercalation-Exfoliation-Reduction Technique towards the Physico-Chemical of VPO Catalysts

2013 ◽  
Vol 2013 ◽  
pp. 1-8
Author(s):  
Y. C. Wong ◽  
Y. H. Taufiq-Yap
Keyword(s):  
Electron Microscope ◽  
X Ray Diffraction ◽  
X Ray ◽  
Vpo Catalysts ◽  
Transmission Electron ◽  
Physico Chemical ◽  
Vpo Catalyst ◽  
Temperature Programmed ◽  
Lower Temperature ◽  
Synthesized Materials

Four VPO catalysts were synthesized through intercalation and exfoliation in various alcohols and subsequent reduction of the exfoliated VOPO4sheets with various alcohols to produce VOHPO4⋅0.5H2O. The resulting VOHPO4⋅0.5H2O that undergoes the intercalation-exfoliation-reduction (IER) process will be further activated into VPO catalysts, and addition of 1 mole % Bi(NO3)3⋅5H2O in the first stage of this experiment has also being investigated. The synthesized materials were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and temperature-programmed reduction (TPR) in H2. Catalytic evaluation of the IER-treated and Bi-doped VPO catalysts was also studied on microreactor. The VPO catalyst produced through IER using 2-butanol and ethanol with addition of Bi, IERC(2Bu-Et)RBi1, gave the highest MA selectivity due to reactive O2−species released from the additional crystalline V5+phase formed by doping 1% bismuth as promoter (O2−-V5+pair) at relative lower temperature. Nevertheless, the VPO catalyst produced through IER using isobutanol, IERC(isoBu), gave the highest activity due to high amount of reactive O−species released from V4+phase (O−-V4+pair) whereby the IERC(isoBu) catalyst synthesized consists of high percentage of V4+(93 %).

Effect of Aging Treatment on Damping Capacity in Mncunife Alloy

2012 ◽  
Vol 246-247 ◽  
pp. 1158-1162
Author(s):  
Xu Fu ◽  
Ning Li ◽  
Yu Hua Wen ◽  
Jing Teng ◽  
Ying Zhang
Keyword(s):  
Electron Microscope ◽  
Aging Treatment ◽  
Damping Capacity ◽  
Torsion Pendulum ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Higher Temperature ◽  
Lower Temperature ◽  
The Relationship

M2052 alloys with various aging treatments are obtained in order to investigate the relationship between aging treatment and damping capacity by the torsion pendulum, X-Ray Diffraction (XRD) and Transmission Electron Microscope (TEM) methods. The results show that M2052 can obtain high damping capacity (δ>0.2) when aged at a range from 400°C to 450°C, and the damping capacity after aged at a lower temperature is higher than that aged at a higher temperature for the maximum values. TEM and XRD results show that fcc-fct transformation occurs after aging treatment. The volumes of fct structures are one of reason to affect the damping capacity in M2052 alloy. The better understanding aging treatment could promote the applications of M2052 alloy.

Tunable Dielectric Properties of BaTiO3/La2O3 Composite Ceramics

2016 ◽  
Vol 848 ◽  
pp. 210-216 ◽  
Author(s):  
Peng Rong Ren ◽  
Qian Wang ◽  
Xin Wang ◽  
Ting Lian ◽  
Gao Yang Zhao
Keyword(s):  
Electron Microscope ◽  
Dielectric Properties ◽  
Dielectric Loss ◽  
Chemical Method ◽  
Composite Ceramics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Lower Temperature ◽  
Scanning Electron

BaTiO3/La2O3 nanopowders were synthesized by a low-temperature soft chemical method, and then the BaTiO3/La2O3 composite ceramics were prepared. X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM) were used to characterize the prepared powders and ceramics. And the dielectric properties of the BaTiO3/La2O3 composite ceramics were studied. The results revealed that some of La3+ ions dissolved into the lattice of BaTiO3 at Ba-site and the rest remained at grain boundaries in oxide form of La2O3. With the content of La2O3 increasing, Curie peak of the BaTiO3/La2O3 composite ceramics moved to a lower temperature, and the dielectric loss of the BaTiO3/La2O3 composite ceramics decreased significantly, while the dielectric tunability still kept a relatively high value. The dielectric permittivity and dielectric loss of BaTiO3/La2O3 composite with 10 at.% La2O3 was 227 and 0.0026 at 25 oC and 10 kHz, meanwhile the tunability was up to 17.4% under the electric field of 20 kV/cm.

Improvement of physico-chemical properties by addition of H2O2: An extensive case study on the RE-doped ceria system (RE = Gd, Sm)

2009 ◽  
Vol 24 (9) ◽  
pp. 2845-2854 ◽  
Author(s):  
Balaji P. Mandal ◽  
Vinita Grover ◽  
Mrinal R. Pai ◽  
Avesh K. Tyagi
Keyword(s):  
Surface Area ◽  
Photoelectron Spectroscopy ◽  
Chemical Properties ◽  
Doped Ceria ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Physico Chemical ◽  
Powder Properties ◽  
Temperature Programmed

Effect of H2O2 on synthesis and powder properties such as surface area and agglomerate size of nanocrystalline Ce0.8M0.2O1.90 (M: Sm, Gd) was explored by treating cerium nitrate and rare-earth nitrate with NaOH in the presence/absence of H2O2. The resultant products were characterized by x-ray diffraction, Raman spectroscopy, thermo-gravimetry–differential thermal analysis, dynamic light scattering, surface area analysis, high-resolution transmission electron microscopy, and x-ray photoelectron spectroscopy. The presence of H2O2 was found to have a profound effect on powder properties such as surface area and particle size of these doped ceria samples and results in smaller crystallite size, softer agglomerates, and larger surface area. A mechanism is proposed to explain the observed better powder properties of the samples. It was also shown that the samples prepared in the presence of H2O2 can lower the conversion temperature of CO to CO2, proving these to be better catalysts. Interestingly, temperature-programmed reduction studies on Sm3+-doped samples showed that the doping in conjunction with the use of H2O2 leads to enhanced reduction properties of the samples over multiple cycles.

Luminescent Properties of Gd2MoO6:Eu3+ Nanophosphor for WLEDs

2021 ◽  
Author(s):  
Yan Chen ◽  
Yuemei Lan ◽  
Dong Wang ◽  
Guoxing Zhang ◽  
Wenlong Peng ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Transmission Electron Microscope ◽  
Fluorescence Spectra ◽  
Solvothermal Method ◽  
Luminescent Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron

A series of Gd2-xMoO6:xEu3+(x=0.18-0.38) nanophosphors were synthesized by the solvothermal method. The properties of this nanophosphor were characterized by x-ray diffraction (XRD), transmission electron microscope (TEM), fluorescence spectra and diffuse...

Formation of Graphite Encapsulated Nickel Nanoparticles by Ball Milling and Annealing of Expanded Graphite with Nickel

2011 ◽  
Vol 80-81 ◽  
pp. 217-220 ◽  
Author(s):  
Xue Qing Yue ◽  
Hai Jun Fu ◽  
Da Jun Li
Keyword(s):  
Electron Microscope ◽  
Ball Milling ◽  
Transmission Electron Microscope ◽  
Nickel Nanoparticles ◽  
Size Range ◽  
Expanded Graphite ◽  
X Ray Diffraction ◽  
X Ray ◽  
Nickel Powders ◽  
Transmission Electron

Graphite encapsulated nickel nanoparticles were prepared by ball milling andsubsequently annealing a mixture of expanded graphite with nickel powders. The products were characterized by transmission electron microscope and X-ray diffraction. The formation mechanism of the products was discussed. Results show that the products have a size range of 20-150 nm. The graphite and nickel in the products all exhibit a high crystallinity.

Solvothermal Synthesis of Bi2Se3 Hexagonal Nanosheet Crystals

2011 ◽  
Vol 236-238 ◽  
pp. 1712-1716 ◽  
Author(s):  
Hai Tao Liu ◽  
Jun Dai ◽  
Jia Jia Zhang ◽  
Wei Dong Xiang
Keyword(s):  
Electron Microscope ◽  
Solvothermal Synthesis ◽  
Solvothermal Method ◽  
Raw Materials ◽  
X Ray Diffraction ◽  
Uniform Size ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Scanning Electron

Bismuth selenide (Bi2Se3) hexagonal nanosheet crystals with uniform size were successfully prepared via a solvothermal method at 160°C for 22 h using bismuth trichloride(BiCl3) and selenium powder(Se) as raw materials, sodium bisulfite(NaHSO3) as a reducing agent, diethylene glycol(DEG) as solvent, and ammonia as pH regulator. Various techniques such as X-ray diffraction (XRD), field-emission scanning electron microscope (FESEM), high-resolution transmission electron microscope (HRTEM), and selected area electron diffraction (SAED) were used to characterize the obtained products. Results show that the as-synthesized samples are pure Bi2Se3 hexagonal nanosheet crystals. A possible growth mechanism for Bi2Se3 hexagonal nanosheet crystals is also discussed based on the experiment.

Template Induced Synthesis of Nano-Hydroxyapatite by Co-Precipitation Method

2011 ◽  
Vol 311-313 ◽  
pp. 1713-1716 ◽  
Author(s):  
Yan Rong Sun ◽  
Tao Fan ◽  
Chang An Wang ◽  
Li Guo Ma ◽  
Feng Liu
Keyword(s):  
Electron Microscope ◽  
Chondroitin Sulfate ◽  
Aspartic Acid ◽  
Transmission Electron Microscope ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure And Morphology ◽  
Transmission Electron ◽  
Co Precipitation

Nano-hydroxyapatite with different morphology was synthesized by the co-precipitation method coupled with biomineralization using Ca(NO3)2•4H2O and (NH4)2HPO4 as reagents, adding chondroitin sulfate, agarose and aspartic acid as template. The structure and morphology of the prepared powders were characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM).

scholarly journals Effect of Preheating Temperature on Synthesis of Pure BiFeO3 via Sol–Gel Method

Nanopages ◽  
2019 ◽  
pp. 1-11
Author(s):  
G. M. Taha ◽  
M. N. Rashed ◽  
M. S. El-Sadek ◽  
M. A. Moghazy
Keyword(s):  
Electron Microscope ◽  
Transmission Electron Microscope ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Pure Bifeo3 ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Transmission Electron ◽  
Preheating Temperature

Abstract BiFeO3 (BFO) nanopowder was synthesized in a pure form via a sol- gel method based on glycol gel reaction. Effect of drying and preheating temperature on preventing other phases was studied. Many parameters were studied as calcination temperature and time & stirring temperature as well. The prepared powder was characterized by X-Ray Diffraction of powder (XRD) and Transmission Electron Microscope (TEM). High pure BiFeO3 was obtained by preheated process at 400 °C for 0.5 h and calcination at 600 °C for 0.5 h without any impurities compared to dry at110 °C.

scholarly journals CO oxidation over Pt-modified CuO catalysts in the presence of water vapour and SO2

2015 ◽  
Vol 18 (2) ◽  
pp. 187-196
Author(s):  
Tri Nguyen ◽  
Anh Cam Ha ◽  
Loc Cam Luu ◽  
Cuong Tien Hoang ◽  
Thi Thi Yen Trinh ◽  
...  
Keyword(s):  
Co Oxidation ◽  
Water Vapour ◽  
Co Adsorption ◽  
X Ray Diffraction ◽  
Active Centers ◽  
Highly Active ◽  
Transmission Electron ◽  
Physico Chemical ◽  
Adsorption Of Co ◽  
Temperature Programmed

The optimal Pt-modified CuO supported on γ-Al2O3 and γ-Al2O3 + CeO2 catalysts have been prepared. Physico-chemical characteristics of catalysts were investigated and determined by the methods of N2 adsorption (BET), X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), temperature-programmed reduction (TPR), and hydrogen pulse chemisorption (HPC). The characteristics of carbon monoxide (CO) adsorption on catalysts were defined by the method of infrared spectroscopy (IR) in the range of 4000 – 400 cm-1. The effect of the mixture of water vapour and SO2 on the activity of these catalysts for the CO oxidation was assessed. Reactions were conducted at 200oC and 350oC in the absence and presence of the mixture of water vapour (1.1 mol %) and SO2 (0.0625 mol %). Concentrations of O2 and CO in the gas mixture were 9.2 mol % and 0.5 mol %, respectively. The results showed that in the catalysts there exist highly active centers Cu1+ and Pt2+. On the catalysts the adsorption of CO on Cu2+, Pt2+, CeO2, and γ - Al2O3 centres was observed. Addition of CeO2 led to increase the reductivity, CO adsorption but decrease in specific surface area of catalyst. The result PtCu/CeAl catalyst shown higher active, but lower stability compared to PtCu/Al catalyst. The mixture of water vapour and SO2 showed the reversible poisoning toward the Pt-CuO catalysts at a temperature of 350oC, but irreversible at 200oC

PHYSICAL PROPERTIES AND MICROSTRUCTURE PERFORMANCE OF LASER ALLOYING Zn MODIFIED AMORPHOUS-NANOCRYSTALS REINFORCED COATING

NANO ◽  
2013 ◽  
Vol 08 (04) ◽  
pp. 1350038 ◽  
Author(s):  
JIANQUAN LI ◽  
HUASHI LIU ◽  
JIANING LI ◽  
GUOZHONG LI
Keyword(s):  
Wear Resistance ◽  
Titanium Alloy ◽  
Electron Microscope ◽  
Crystallization Process ◽  
Laser Alloying ◽  
X Ray Diffraction ◽  
X Ray ◽  
Amorphous Phases ◽  
Transmission Electron ◽  
Improve Wear Resistance

Zn was firstly used to improve wear resistance of a TA7 (Ti–5Al–2.5Sn) titanium alloy surface by mean of a laser alloying (LA) technique. The synthesis of the hard coating on a TA7 titanium alloy by LA of Co–Ti–Cr–TiB2–Zn–CeO2 pre-placed powders was investigated by means of scanning electron microscope (SEM), X-ray diffraction (XRD) and high resolution transmission electron microscope (HRTEM). Experimental results indicated lot of the nanocrystals, such as Ti–B/CoZn13 and the amorphous phases were produced in such LA coating. The nucleation and growth of the amorphous phases were retarded by the nanocrystals in a certain extent during the crystallization process of the amorphous phases. Compared with a TA7 alloy substrate, an improvement of the wear resistance was obtained for such LA composite coating.

Sign in / Sign up

Export Citation Format

Share Document