scholarly journals 3D-Printed Biopolymers for Tissue Engineering Application

2014 ◽  
Vol 2014 ◽  
pp. 1-13 ◽  
Author(s):  
Xiaoming Li ◽  
Rongrong Cui ◽  
Lianwen Sun ◽  
Katerina E. Aifantis ◽  
Yubo Fan ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Three Dimensional ◽  
Engineering Application ◽  
Tissue Engineering Application ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Potential Applications ◽  
3D Printed ◽  
Dimensional Object

3D printing technology has recently gained substantial interest for potential applications in tissue engineering due to the ability of making a three-dimensional object of virtually any shape from a digital model. 3D-printed biopolymers, which combine the 3D printing technology and biopolymers, have shown great potential in tissue engineering applications and are receiving significant attention, which has resulted in the development of numerous research programs regarding the material systems which are available for 3D printing. This review focuses on recent advances in the development of biopolymer materials, including natural biopolymer-based materials and synthetic biopolymer-based materials prepared using 3D printing technology, and some future challenges and applications of this technology are discussed.

Importance of 3D Printing Technology in Medical Fields

2019 ◽  
pp. 21-40
Author(s):  
Ranjit Barua ◽  
Sudipto Datta ◽  
Amit Roychowdhury ◽  
Pallab Datta
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
3D Printing ◽  
New Technology ◽  
Three Dimensional ◽  
Layer By Layer ◽  
Medical Field ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Proper Material

Three-dimensional or 3D printing technology is a growing interest in medical fields like tissue engineering, dental, drug delivery, prosthetics, and implants. It is also known as the additive manufacturing (AM) process because the objects are done by extruding or depositing the material layer by layer, and the material may be like biomaterials, plastics, living cells, or powder ceramics. Specially in the medical field, this new technology has importance rewards in contrast with conventional technologies, such as the capability to fabricate patient-explicit difficult components, desire scaffolds for tissue engineering, and proper material consumption. In this chapter, different types of additive manufacturing (AM) techniques are described that are applied in the medical field, especially in community health and precision medicine.

From Patient to Procedure: The Process of Creating a Custom 3D-Printed Medical Device for Foot and Ankle Pathology

2020 ◽  
pp. 193864002097141
Author(s):  
Rishin J. Kadakia ◽  
Colleen M. Wixted ◽  
Cambre N. Kelly ◽  
Andrew E. Hanselman ◽  
Samuel B. Adams
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Improve Patient Care ◽  
Physician Education ◽  
Foot And Ankle ◽  
Printing Technology ◽  
Three Dimensional Printing ◽  
3D Printing Technology ◽  
3D Printed ◽  
3D Anatomy

Three-dimensional (3D) printing technology has advanced greatly over the past decade and is being used extensively throughout the field of medicine. Several orthopaedic surgery specialties have demonstrated that 3D printing technology can improve patient care and physician education. Foot and ankle pathology can be complex as the 3D anatomy can be challenging to appreciate. Deformity can occur in several planes simultaneously and bone defects either from previous surgery or trauma can further complicate surgical correction. Three-dimensional printing technology provides an avenue to tackle the challenges associated with complex foot and ankle pathology. A basic understanding of how these implants are designed and made is important for surgeons as this technology is becoming more widespread and the clinical applications continue to grow within foot and ankle surgery. Levels of Evidence: Level V

Novel exploration of 3D printed wrist arthroplasty to solve the severe and complicated bone defect of wrist

2017 ◽  
Vol 23 (3) ◽  
pp. 465-473 ◽  
Author(s):  
Qing Han ◽  
Yanguo Qin ◽  
Yun Zou ◽  
Chenyu Wang ◽  
Haotian Bai ◽  
...  
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Surgical Techniques ◽  
Bone Defects ◽  
Printing Technology ◽  
Content Type ◽  
3D Printing Technology ◽  
3D Printed ◽  
And Function ◽  
Wrist Arthroplasty

Purpose Although proximal row carpectomy, wrist arthrodesis and even total wrist arthroplasty were developed to treat wrist disease using bone and cartilage of the wrist, severe and complicated bone defects caused by ferocious trauma and bone tumors remain a stubborn problem for surgeons. Development and application of the three-dimensional (3D) printing technology may provide possible solutions. Design/methodology/approach Computed tomography (CT) data of three cases with severe bone defects caused by either trauma or bone tumor were collected and converted into three-dimensional models. Prostheses were designed individually according to the residual anatomical structure of the wrist based on the models. Both the models and prostheses were produced using 3D printing technology. A preoperative design was prepared according to the models and prostheses. Then arthroplasty was performed after preoperative simulation with printed models and prostheses. Findings The diameter of the stem and radial medullary cavity, the direction and location of the prosthesis, and other components were checked during the preoperative design and simulation process phases. The three cases with 3D printed wrist all regained reconstruction of normal anatomy and part of the function after surgery. The average increasing Cooney score rate of Cases 2 and 3 was 133.34 ± 23.57 per cent, and that of Case 1 reached 85 per cent. The average declining rate of the Gartland and Werley Score in Cases 2 and 3 was 65.21 ± 18.89 per cent, and that of Case 1 dropped to 5 per cent in the last follow-up. The scores indicated that patients experienced pain relief and function regain. In addition, the degree of patient satisfaction improved. Originality/value 3D printed wrist arthroplasty may provide an effective method for severe and complicated cases without sacrificing other bones. Personal customization can offer better anatomy and function than arthrodesis or other traditional surgical techniques.

Importance of 3D Printing Technology in Medical Fields

2021 ◽  
pp. 704-717
Author(s):  
Ranjit Barua ◽  
Sudipto Datta ◽  
Amit Roychowdhury ◽  
Pallab Datta
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
3D Printing ◽  
New Technology ◽  
Three Dimensional ◽  
Layer By Layer ◽  
Medical Field ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Proper Material

Three-dimensional or 3D printing technology is a growing interest in medical fields like tissue engineering, dental, drug delivery, prosthetics, and implants. It is also known as the additive manufacturing (AM) process because the objects are done by extruding or depositing the material layer by layer, and the material may be like biomaterials, plastics, living cells, or powder ceramics. Specially in the medical field, this new technology has importance rewards in contrast with conventional technologies, such as the capability to fabricate patient-explicit difficult components, desire scaffolds for tissue engineering, and proper material consumption. In this chapter, different types of additive manufacturing (AM) techniques are described that are applied in the medical field, especially in community health and precision medicine.

Development of fabrics by digital light processing three-dimensional printing technology and using a polyurethane acrylate photopolymer

2019 ◽  
Vol 90 (7-8) ◽  
pp. 847-856
Author(s):  
Seul Gi Kim ◽  
Ji Eun Song ◽  
Hye Rim Kim
Keyword(s):  
3D Printing ◽  
Layer Thickness ◽  
Three Dimensional ◽  
Curing Time ◽  
Printing Technology ◽  
Digital Light Processing ◽  
Three Dimensional Printing ◽  
3D Printing Technology ◽  
Polyurethane Acrylate ◽  
3D Printed

This study aimed to produce fabrics by the digital light processing (DLP) three-dimensional (3D) printing technology and using a polyurethane acrylate photopolymer as the printing material. The effect of the acrylate oligomer concentration on printing was evaluated. The DLP 3D printing conditions, such as the curing time and layer thickness, were controlled considering the physical properties, such as the tensile strength, elongation, and crease recovery of the 3D printed material. The optimal printing conditions were as follows: concentration of acrylate oligomer in the photopolymer: 10% (v/v); curing time per layer: 14 s; and layer thickness: 100 µm. These results are expected to guide further studies on the development of fabrics using DLP 3D printing technology.

scholarly journals Research of TPU Materials for 3D Printing Aiming at Non-Pneumatic Tires by FDM Method

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2492
Author(s):  
Jun Wang ◽  
Bin Yang ◽  
Xiang Lin ◽  
Lei Gao ◽  
Tao Liu ◽  
...  
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Low Cost ◽  
Three Dimensional ◽  
Printing Technology ◽  
Performance Simulation ◽  
3D Printing Technology ◽  
Fused Deposition ◽  
3D Printed ◽  
Pneumatic Tires

3D printing technology has been widely used in various fields, such as biomedicine, clothing design, and aerospace, due to its personalized customization, rapid prototyping of complex structures, and low cost. However, the application of 3D printing technology in the field of non-pneumatic tires has not been systematically studied. In this study, we evaluated the application of potential thermoplastic polyurethanes (TPU) materials based on FDM technology in the field of non-pneumatic tires. First, the printing process of TPU material based on fused deposition modeling (FDM) technology was studied through tensile testing and SEM observation. The results show that the optimal 3D printing temperature of the selected TPU material is 210 °C. FDM technology was successfully applied to 3D printed non-pneumatic tires based on TPU material. The study showed that the three-dimensional stiffness of 3D printed non-pneumatic tires is basically 50% of that obtained by simulation. To guarantee the prediction of the performance of 3D printed non-pneumatic tires, we suggest that the performance of these materials should be moderately reduced during the structural design for performance simulation.

scholarly journals 3D Printing in Breast Reconstruction: From Bench to Bed

2021 ◽  
Vol 8 ◽  
Author(s):  
Xingdou Mu ◽  
Juliang Zhang ◽  
Yue Jiang
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Breast Reconstruction ◽  
Reconstructive Surgical Procedures ◽  
Three Dimensional ◽  
Future Directions ◽  
Printing Technology ◽  
Reconstructive Procedures ◽  
3D Printing Technology ◽  
Reconstruction Methods

Surgical management of breast cancer often results in the absence of the breast. However, existing breast reconstruction methods may not meet the need for a replacement tissue. Tissue engineering with the use of emerging materials offers the promise of generating appropriate replacements. Three-dimensional (3D) printing technology has seen a significantly increased interest and application in medically-related fields in the recent years. This has been especially true in complex medical situations particularly when abnormal or complicated anatomical surgical considerations or precise reconstructive procedures are contemplated. In addition, 3D bio-printing which combines cells with bio-material scaffolds offers an exciting technology with significant applications in the field of tissue engineering. The purpose of this manuscript was to review a number of studies in which 3D printing technology has been used in breast reconstructive surgical procedures, and future directions and applications of 3D bio-printing.

scholarly journals A millifluidic chip for cultivation of fish embryos and toxicity testing fabricated by 3D printing technology

RSC Advances ◽  
2021 ◽  
Vol 11 (33) ◽  
pp. 20507-20518
Author(s):  
Petr Panuška ◽  
Zuzana Nejedlá ◽  
Jiří Smejkal ◽  
Petr Aubrecht ◽  
Michaela Liegertová ◽  
...  
Keyword(s):  
3D Printing ◽  
Toxicity Testing ◽  
Toxicity Screening ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Fish Embryos ◽  
3D Printed ◽  
Novel Design

A novel design of 3D printed zebrafish millifluidic system for embryonic long-term cultivation and toxicity screening has been developed. The chip unit provides 24 cultivation chambers and a selective individual embryo removal functionality.

scholarly journals Traditional versus mirror three-dimensional printing technology for isolated acetabular fractures: a retrospective study with a median follow-up of 25 months

2021 ◽  
Vol 49 (6) ◽  
pp. 030006052110285
Author(s):  
Kai Xiao ◽  
Bo Xu ◽  
Lin Ding ◽  
Weiguang Yu ◽  
Lei Bao ◽  
...  
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Operation Time ◽  
Harris Hip Score ◽  
Acetabular Fractures ◽  
Printing Technology ◽  
Three Dimensional Printing ◽  
3D Printing Technology ◽  
Significant Difference

Objective To assess the outcomes of traditional three-dimensional (3D) printing technology (TPT) versus mirror 3D printing technology (MTT) in treating isolated acetabular fractures (IAFs). Methods Consecutive patients with an IAF treated by either TPT or MTT at our tertiary medical centre from 2012 to 2018 were retrospectively reviewed. Follow-up was performed 1, 3, 6, and 12 months postoperatively and annually thereafter. The primary outcome was the Harris hip score (HHS), and the secondary outcomes were major intraoperative variables and key orthopaedic complications. Results One hundred fourteen eligible patients (114 hips) with an IAF (TPT, n = 56; MTT, n = 58) were evaluated. The median follow-up was 25 months (range, 21–28 months). At the last follow-up, the mean HHS was 82.46 ±14.70 for TPT and 86.30 ± 13.26 for MTT with a statistically significant difference. Significant differences were also detected in the major intraoperative variables (operation time, intraoperative blood loss, number of fluoroscopic screenings, and anatomical reduction number) and the major orthopaedic complications (loosening, implant failure, and heterotopic ossification). Conclusion Compared with TPT, MTT tends to produce accurate IAF reduction and may result in better intraoperative variables and a lower rate of major orthopaedic complications.

scholarly journals 3D-Printed Nanocellulose-Based Cushioning–Antibacterial Dual-Function Food Packaging Aerogel

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3543
Author(s):  
Wei Zhou ◽  
Jiawei Fang ◽  
Shuwei Tang ◽  
Zhengguo Wu ◽  
Xiaoying Wang
Keyword(s):  
3D Printing ◽  
Food Packaging ◽  
Fruits And Vegetables ◽  
Antibacterial Effect ◽  
Dual Function ◽  
Printing Technology ◽  
E Coli ◽  
3D Printing Technology ◽  
The Core ◽  
3D Printed

Cushioning and antibacterial packaging are the requirements of the storage and transportation of fruits and vegetables, which are essential for reducing the irreversible quality loss during the process. Herein, the composite of carboxymethyl nanocellulose, glycerin, and acrylamide derivatives acted as the shell and chitosan/AgNPs were immobilized in the core by using coaxial 3D-printing technology. Thus, the 3D-printed cushioning–antibacterial dual-function packaging aerogel with a shell–core structure (CNGA/C–AgNPs) was obtained. The CNGA/C–AgNPs packaging aerogel had good cushioning and resilience performance, and the average compression resilience rate was more than 90%. Although AgNPs was slowly released, CNGA/C–AgNPs packaging aerogel had an obvious antibacterial effect on E. coli and S. aureus. Moreover, the CNGA/C–AgNPs packaging aerogel was biodegradable. Due to the customization capabilities of 3D-printing technology, the prepared packaging aerogel can be adapted to more application scenarios by accurately designing and regulating the microstructure of aerogels, which provides a new idea for the development of food intelligent packaging.

Sign in / Sign up

Export Citation Format

Share Document