scholarly journals Influence of NH4Cl on Hydrothermal Formation ofα-CaSO4·0.5H2O Whiskers

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Haoyuan Chen ◽  
Jing Wang ◽  
Sichao Hou ◽  
Lan Xiang

The influence of NH4Cl on hydrothermal formation of CaSO4·0.5H2O whiskers from CaSO4·2H2O precursor at 135°C was investigated in this paper. Compared with the blank experiment, the presence of 3 × 10−2 mol·L−1NH4Cl led to the increase of the lengths of the whiskers from 50 to 160 μm to 150 to 300 μm and the decrease of the diameters from 1.0 to 1.5 μm to 0.2 to 0.5 μm. The dissolution of CaSO4·2H2O was accelerated by the complex interactions with NH4Cl and the soluble cations, which led to the decrease of the induction time for the occurrence ofα-CaSO4·0.5H2O from 46 minutes to 34 minutes and the formation of CaSO4·0.5H2O whiskers with high aspect ratios. Furthermore the critical supersaturation for the formation ofα-CaSO4·0.5H2O was investigated.

Author(s):  
Jean Fincher

An important trend in the food industry today is reduction in the amount of fat in manufactured foods. Often fat reduction is accomplished by replacing part of the natural fat with carbohydrates which serve to bind water and increase viscosity. It is in understanding the roles of these two major components of food, fats and carbohydrates, that freeze-fracture is so important. It is well known that conventional fixation procedures are inadequate for many food products, in particular, foods with carbohydrates as a predominant structural feature. For some food science applications the advantages of freeze-fracture preparation procedures include not only the avoidance of chemical fixatives, but also the opportunity to control the temperature of the sample just prior to rapid freezing.In conventional foods freeze-fracture has been used most successfully in analysis of milk and milk products. Milk gels depend on interactions between lipid droplets and proteins. Whipped emulsions, either whipped cream or ice cream, involve complex interactions between lipid, protein, air cell surfaces, and added emulsifiers.


2011 ◽  
Vol 29 (supplement) ◽  
pp. 283-304 ◽  
Author(s):  
Timothy R. Brick ◽  
Steven M. Boker

Among the qualities that distinguish dance from other types of human behavior and interaction are the creation and breaking of synchrony and symmetry. The combination of symmetry and synchrony can provide complex interactions. For example, two dancers might make very different movements, slowing each time the other sped up: a mirror symmetry of velocity. Examining patterns of synchrony and symmetry can provide insight into both the artistic nature of the dance, and the nature of the perceptions and responses of the dancers. However, such complex symmetries are often difficult to quantify. This paper presents three methods – Generalized Local Linear Approximation, Time-lagged Autocorrelation, and Windowed Cross-correlation – for the exploration of symmetry and synchrony in motion-capture data as is it applied to dance and illustrate these with examples from a study of free-form dance. Combined, these techniques provide powerful tools for the examination of the structure of symmetry and synchrony in dance.


1986 ◽  
Vol 14 (4) ◽  
pp. 235-263
Author(s):  
A. G. Veith

Abstract The effect of tread compound variation on tire treadwear was studied using bias and radial tires of two aspect ratios. Compound variations included types of rubber and carbon black as well as the levels of carbon black, process oil, and curatives. At low to moderate test severity, SBR and an SBR/BR blend performed better than NR while at high test severity NR and SBR were better than the SBR/BR blend. The SBR/BR blend was the best at low severity testing. Higher structure and higher surface area carbon black gave improved treadwear at all severity levels. The concept of a “frictional work intensity” as the primary determinant of treadwear index variation with test severity is proposed. Some factors which influence frictional work intensity are discussed.


2018 ◽  
Author(s):  
Divya Bohra ◽  
Isis Ledezma-Yanez ◽  
Guanna Li ◽  
Wiebren De Jong ◽  
Evgeny A. Pidko ◽  
...  

<p>The analysis presented in this manuscript helps bridge an important fundamental discrepancy between the existing theoretical and experimental knowledge regarding the performance of Ag catalysts for CO<sub>2</sub> electrochemical reduction (CO<sub>2</sub>ER). The results demonstrate how the intermediate species *OCHO is formed readily en-route the HCOO<sup>– </sup>pathway and plays a decisive role in determining selectivity of a predominantly CO producing catalyst such as Ag. Our theoretical and experimental approach develops a better understanding of the nature of competition as well as the complex interactions between the reaction intermediates leading to CO, HCOO<sup>–</sup> and H<sub>2</sub> during CO<sub>2</sub>ER.</p><p><br></p><p>Details of computational and experimental methods are present in the Supporting Information provided. </p><p><br></p><p><br></p>


Author(s):  
R.K. Jain ◽  
T. Malik ◽  
T.R. Lundquist ◽  
C.-C. Tsao ◽  
W.J. Walecki

Abstract Novel Fabry Perot [1] fringe analysis techniques for monitoring the etching process with a coaxial photon-ion column [2] in the Credence OptiFIB are reported. Presently the primary application of these techniques in circuit edit is in trenching either from the front side or from the backside of a device. Optical fringes are observed in reflection geometry through the imaging system when the trench floor is thin and semi-transparent. The observed fringes result from optical interference in the etalon formed between the trench floor (Si in the case of backside trenching) and the circuitry layer beyond the trench floor. In-situ real-time thickness measurements and slope correction techniques are proposed that improve endpoint detection and control planarity of the trench floor. For successful through silicon edits, reliable endpoint detection and co-planarity of a local trench is important. Reliable endpoint detection prevents milling through bulk silicon and damaging active circuitry. Uneven trench floor thickness results in premature endpoint detection with sufficient thickness remaining in only part of the trench area. Good co-planarity of the trench floor also minimizes variability in the aspect ratios of the edit holes, hence increasing success rates in circuit edit.


2020 ◽  
Vol 16 ◽  
Author(s):  
Anjana R Nair ◽  
Aiswarya J Pillai ◽  
Nandini Nair

: Menopause is associated with changes consistent with cardiovascular aging. The effects on cardiac disease is multifaceted affecting endothelial function, coronary artery physiology and metabolic dysfunction leading to structural changes in the coronary anatomy. A systematic review of literature from 1986 to 2019 was conducted using PubMed and Google Scholar. The search was directed to retrieve papers that addressed the changes in cardiovascular physiology in menopause and the current therapies available to treat cardiovascular manifestations of menopause. The metabolic and clinical factors secondary to menopause such as dyslipidemia, insulin resistance, fat redistribution and systemic hypertension contribute to the accelerated risk for cardiovascular aging and disease. Atherosclerosis appears to be the end result of the interaction between cardiovascular risk factors and their accentuation during the perimenopausal period. Additionally, complex interactions between oxidative stress and levels of L-arginine and ADMA may also influence endothelial dysfunction in menopause. The increased cardiovascular risk in menopause stems from the exaggerated effects of changing physiology on the cardiovascular system affecting peripheral, cardiac and cerebrovascular beds. The differential effects of menopause on cardiovascular disease at the subclinical, biochemical and molecular levels form the highlights of this review.


Author(s):  
Andes Garchitorena ◽  
Matthew H. Bonds ◽  
Jean-Francois Guégan ◽  
Benjamin Roche

This chapter provides an overview of the complex interactions between ecological and socioeconomic factors for the development and control of Buruli ulcer in Sub-Saharan Africa. We review key ecological and evolutionary processes driving the environmental persistence and proliferation of Mycobacterium ulcerans, the causative agent, within aquatic environments, as well as transmission processes from these aquatic environments to human populations. We also outline key socioeconomic factors driving the economic and health burden of Buruli ulcer in endemic regions, revealed by reciprocal feedbacks between poverty, disease transmission from exposure aquatic environments and disease progression to severe stages owing to low access to health care. The implications of such insights for disease control, both in terms of limitations of current strategies and directions for the future, are discussed.


Author(s):  
Phanish Puranam

In this chapter, my aim is describe the links between the formal and informal structure of organizations, and propose a systematic approach to analyzing these links. I first discuss how the two are related and influence each other. Next, revisiting the theme of organizations as “marvels but not miracles” I argue that formal design can be useful even when it not predicated on high levels of comprehension or intelligence. This is because it can compensate for aspects of the informal organization, as well as shape the emergence of the informal organization. I discuss an instance of a micro-structural approach to such issues in some detail, and conclude by offering a multiplex network formulation that can help us make progress in studying the complex interactions between formal and informal organizational structures.


Sign in / Sign up

Export Citation Format

Share Document