scholarly journals Discrimination and Content Analysis of Fritillaria Using Near Infrared Spectroscopy

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Yu Meng ◽  
Shisheng Wang ◽  
Rui Cai ◽  
Bohai Jiang ◽  
Weijie Zhao
Keyword(s):  
Infrared Spectroscopy ◽  
Quantitative Analysis ◽  
Near Infrared Spectroscopy ◽  
Near Infrared ◽  
Partial Least Square ◽  
Least Square ◽  
Traditional Chinese Herbal Medicine ◽  
Total Alkaloids ◽  
Rapid Discrimination ◽  
Different Origins

Fritillaria is a traditional Chinese herbal medicine which can be used to moisten the lungs. The objective of this study is to develop simple, accurate, and solvent-free methods to discriminate and quantify Fritillaria herbs from seven different origins. Near infrared spectroscopy (NIRS) methods are established for the rapid discrimination of seven different Fritillaria samples and quantitative analysis of their total alkaloids. The scaling to first range method and the partial least square (PLS) method are used for the establishment of qualitative and quantitative analysis models. As a result of evaluation for the qualitative NIR model, the selectivity values between groups are always above 2, and the mistaken judgment rate of fifteen samples in prediction sets was zero. This means that the NIR model can be used to distinguish different species of Fritillaria herbs. The established quantitative NIR model can accurately predict the content of total alkaloids from Fritillaria samples.

Quantitative Analysis of Radix Rehmanniae from Genuine Producing Area by Near Infrared Spectroscopy

2014 ◽  
Vol 912-914 ◽  
pp. 2010-2013
Author(s):  
Hai Yan Gong ◽  
Cai Xia Xie ◽  
Ming Xia Wu ◽  
Yong Xia Cui ◽  
Zhi Hong Chen ◽  
...  
Keyword(s):  
Infrared Spectroscopy ◽  
Quantitative Analysis ◽  
Near Infrared Spectroscopy ◽  
Near Infrared ◽  
Water Extract ◽  
Partial Least Square ◽  
Water Soluble ◽  
Least Square ◽  
Analysis Model ◽  
Soluble Components

In this paper the water extract of Radix Rehmanniae from genuine producing area was rapidly determined by near-infrared spectroscopy (NIRS). The quantitative analysis model of the water extraction of Radix Rehmanniae was established by Partial Least Square (PLS). The correlation coefficient of calibration (R2) was 0.99529; the root-mean-square error of prediction (RMSEP) was 0.134. The results indicated that the water-soluble components in Radix Rehmanniae from genuine producing area can be rapidly and accurately determined by near-infrared spectroscopy technology.

scholarly journals Comparison of Hyperspectral Imaging and Near-Infrared Spectroscopy to Determine Nitrogen and Carbon Concentrations in Wheat

2021 ◽  
Vol 13 (6) ◽  
pp. 1128
Author(s):  
Iman Tahmasbian ◽  
Natalie K Morgan ◽  
Shahla Hosseini Bai ◽  
Mark W Dunlop ◽  
Amy F Moss
Keyword(s):  
Infrared Spectroscopy ◽  
Hyperspectral Imaging ◽  
Near Infrared Spectroscopy ◽  
Near Infrared ◽  
Economic Benefits ◽  
Partial Least Square ◽  
Least Square ◽  
Statistical Population ◽  
Processing Plants ◽  
C And N

Hyperspectral imaging (HSI) is an emerging rapid and non-destructive technology that has promising application within feed mills and processing plants in poultry and other intensive animal industries. HSI may be advantageous over near infrared spectroscopy (NIRS) as it scans entire samples, which enables compositional gradients and sample heterogenicity to be visualised and analysed. This study was a preliminary investigation to compare the performance of HSI with that of NIRS for quality measurements of ground samples of Australian wheat and to identify the most important spectral regions for predicting carbon (C) and nitrogen (N) concentrations. In total, 69 samples were scanned using an NIRS (400–2500 nm), and two HSI cameras operated in 400–1000 nm (VNIR) and 1000–2500 nm (SWIR) spectral regions. Partial least square regression (PLSR) models were used to correlate C and N concentrations of 63 calibration samples with their spectral reflectance, with 6 additional samples used for testing the models. The accuracy of the HSI predictions (full spectra) were similar or slightly higher than those of NIRS (NIRS Rc2 for C = 0.90 and N = 0.96 vs. HSI Rc2 for C (VNIR) = 0.97 and N (SWIR) = 0.97). The most important spectral region for C prediction identified using HSI reflectance was 400–550 nm with R2 of 0.93 and RMSE of 0.17% in the calibration set and R2 of 0.86, RMSE of 0.21% and ratio of performance to deviation (RPD) of 2.03 in the test set. The most important spectral regions for predicting N concentrations in the feed samples included 1451–1600 nm, 1901–2050 nm and 2051–2200 nm, providing prediction with R2 ranging from 0.91 to 0.93, RMSE ranging from 0.06% to 0.07% in the calibration sets, R2 from 0.96 to 0.99, RMSE of 0.06% and RPD from 3.47 to 3.92 in the test sets. The prediction accuracy of HSI and NIRS were comparable possibly due to the larger statistical population (larger number of pixels) that HSI provided, despite the fact that HSI had smaller spectral range compared with that of NIRS. In addition, HSI enabled visualising the variability of C and N in the samples. Therefore, HSI is advantageous compared to NIRS as it is a multifunctional tool that poses many potential applications in data collection and quality assurance within feed mills and poultry processing plants. The ability to more accurately measure and visualise the properties of feed ingredients has potential economic benefits and therefore additional investigation and development of HSI in this application is warranted.

Near-Infrared Spectroscopy for Discrimination of Charcoal from Eucalyptus and Native Cerrado Species—Contribution to a Database for Forestry Supervision

2021 ◽  
Author(s):  
Silvana Nisgoski ◽  
Thaís A P Gonçalves ◽  
Júlia Sonsin-Oliveira ◽  
Adriano W Ballarin ◽  
Graciela I B Muñiz
Keyword(s):  
Infrared Spectroscopy ◽  
Discriminant Analysis ◽  
Near Infrared Spectroscopy ◽  
Near Infrared ◽  
New Technologies ◽  
Partial Least Square ◽  
Least Square ◽  
Partial Least Square Regression ◽  
Eucalyptus Species ◽  
Linear Discriminant

Abstract The illegal charcoal trade is an internationally well-known forest crime. In Brazil, government agents try to control it using the document of forest origin (DOF). To confirm a load’s legality, the agents must compare it with the declared content of the DOF. However, to identify charcoal is difficult even for specialists in wood anatomy. Hence, new technologies would facilitate the agents’ work. Near-infrared spectroscopy (NIR) provides a rapid and precise response to differentiate carbonized species. Considering the rich Brazilian flora, NIR studies are still underdeveloped. Our work aimed to differentiate charcoals of seven eucalypts and 10 Cerrado species based on NIR analysis and to add information to a charcoal database. Data were collected with a spectrophotometer in reflectance mode. Partial least square regression with discriminant analysis (PLS-DA) and a linear discriminant analysis (LDA) was applied to confirm the performance and potential of NIR spectra to distinguish native Cerrado species from eucalyptus species. Wavenumbers from 4,000 to 6,000 cm−1 and transversal surface presented the best results. NIR had the potential to distinguish eucalypt charcoals from Cerrado species and in comparison to reference samples. NIR is a potential tool for forestry supervision to guarantee the sustainability of the charcoal supply in Brazil and countries with similar conditions. Study Implications It is a challenge to protect the Cerrado biome against deforestation for charcoal production. The application of new technologies such as near-infrared spectroscopy (NIR) for charcoal identification might improve the work of government agents. In this article, we studied the spectra of Cerrado and eucalypt species. Our results present good separation between the analyzed groups. The main goal is to develop a reliable NIR database that would be useful in the practical work of agents. The database will be available for all control agencies, and future training will be done for a rapid initial evaluation in the field.

Using near infrared spectroscopy to determine moisture and starch content of corn processing products

2017 ◽  
Vol 25 (5) ◽  
pp. 348-359 ◽  
Author(s):  
Ye Chen ◽  
Lauren Delaney ◽  
Susan Johnson ◽  
Paige Wendland ◽  
Rogerio Prata
Keyword(s):  
Infrared Spectroscopy ◽  
Near Infrared Spectroscopy ◽  
Near Infrared ◽  
Starch Content ◽  
Rapid Development ◽  
Partial Least Square ◽  
Least Square ◽  
Operational Parameters ◽  
Corn Flour ◽  
Analytical Technique

Due to the rapid development of the corn-to-ethanol industry, the demand for process monitoring has led to the gradual substitution of traditional analytical techniques with fast and non-destructive methods such as near infrared spectroscopy. In this study, the feasibility of using Fourier transform–near infrared technology as an analytical tool to predict operational parameters (dry solids, starch, carbohydrate, and ethanol content) was investigated. Corn flour, liquefied mash, fermented mash, and distiller’s dried grains with solubles were selected to represent the feedstock, two intermediate products, and one primary co-product of corn-to-ethanol plants, respectively. Multivariate partial least square calibration models were developed to correlate near infrared spectra to the corresponding analytical values. The validation results indicate that near infrared models can be developed that will predict various parameters accurately (root mean square error of prediction: 0.16–1.14%, residual predictive deviation: 3.0–6.3). Measurement of starch or carbohydrate content in corn flour or distiller’s dried grains with solubles is challenging due to low accuracy of wet chemistry methods as well as sample complexity. The study demonstrated that near infrared spectroscopy, a high-throughput analytical technique, has the potential to replace the enzymatic assay.

scholarly journals Detection of malaria in insectary-reared Anopheles gambiae using near-infrared spectroscopy

2019 ◽  
Author(s):  
Marta F. Maia ◽  
Melissa Kapulu ◽  
Michelle Muthui ◽  
Martin G. Wagah ◽  
Heather M. Ferguson ◽  
...  
Keyword(s):  
Infrared Spectroscopy ◽  
Anopheles Gambiae ◽  
Near Infrared Spectroscopy ◽  
Large Scale ◽  
Near Infrared ◽  
Partial Least Square ◽  
Least Square ◽  
Partial Least Square Regression ◽  
Human Malaria ◽  
The Impact

AbstractLarge-scale surveillance of mosquito populations is crucial to assess the intensity of vector-borne disease transmission and the impact of control interventions. However, there is a lack of accurate, cost-effective and high-throughput tools for mass-screening of vectors. This study demonstrates proof-of-concept that near-infrared spectroscopy (NIRS) is capable of rapidly identifying laboratory strains of human malaria infection in African mosquito vectors. By using partial least square regression models based on malaria-infected and uninfected Anopheles gambiae mosquitoes, we showed that NIRS can detect oocyst- and sporozoite-stage Plasmodium falciparum infections with 88% and 95% accuracy, respectively. Accurate, low-cost, reagent-free screening of mosquito populations enabled by NIRS could revolutionize surveillance and elimination strategies for the most important human malaria parasite in its primary African vector species. Further research is needed to evaluate how the method performs in the field following adjustments in the training datasets to include data from wild-caught infected and uninfected mosquitoes.

scholarly journals Analisa Gula Kristal Putih Secara Cepat Menggunakan Near Infrared Spectroscopy

2021 ◽  
Vol 1 (2) ◽  
pp. 106-113
Author(s):  
Opal Priya Wening
Keyword(s):  
Content Analysis ◽  
Infrared Spectroscopy ◽  
Near Infrared Spectroscopy ◽  
Near Infrared ◽  
Partial Least Square ◽  
Least Square

Near infrared spectroscopy (NIRS) merupakan metode alternatif untuk menganalisa parameter sampel yang lebih cepat. Pada penelitian ini, NIRS akan digunakan sebagai penentuan kualitas gula kristal putih (GKP) dengan parameter penting seperti pol, warna, susut pengeringan, dan berat jenis butiran. Sampel gula yang digunakan berasal dari laboratorium P3GI. Instrumen NIRS menggunakan FOSS XDS rapid content analysis, kemudian model yang dibangun menggunakan metode kalibrasi partial least square (PLS). Hasil NIRS dievaluasi dengan standar: nilai korelasi R2 dan r2 yang mendekati 1, error SEC yang rendah, dan rasio RPD yang tinggi. Penelitian menghasilkan nilai untuk pol (%): R2 = 0,970, SEC = 0,023, r2 = 0,496, RPD = 1,152; warna (IU):  R2 = 0,970, SEC = 12,305, r2 = 0,757, RPD = 1,529; susut pengeringan (%): R2 = 0,973, SEC = 0,004, r2 = 0,789, RPD = 1,601; dan berat jenis butiran (mm): R2 = 0,954, SEC = 0,038, r2 = 0,407, RPD = 0,997. Berdasarkan hasil evaluasi tersebut metode NIRS berpotensi sebagai analisa kualitas gula kristal putih dengan model yang dibangun tergolong sebagai pendahuluan.

Visible-near infrared spectroscopy for detection of blood in sheep faeces

2020 ◽  
Vol 28 (5-6) ◽  
pp. 255-266 ◽  
Author(s):  
Elise A Kho ◽  
Jill N Fernandes ◽  
Andrew C Kotze ◽  
Glen P Fox ◽  
Maggy Lord ◽  
...  
Keyword(s):  
Support Vector Machine ◽  
Infrared Spectroscopy ◽  
Near Infrared Spectroscopy ◽  
Near Infrared ◽  
Mean Squared Error ◽  
Partial Least Square ◽  
Least Square ◽  
Support Vector ◽  
Root Mean Squared Error ◽  
Squared Error

Heavy infestations of the blood-sucking gastrointestinal nematodes, Haemonchus contortus can cause severe anaemia in sheep and leakage of blood into the faeces, leading to morbidity and mortality. Early and accurate diagnosis of infections is critical for timely treatment of sheep, minimizing production and sheep welfare impacts. In pursuit of a quick and easy measure of H. contortus infections, we investigated the use of portable visible near infrared spectrometers for detecting the presence of haemoglobin in sheep faeces as an indicator of H. contortus infection. Calibration models built within the 400–600 nm region by partial least square regression resulted in acceptable prediction accuracies (r 2 p > 0.70 and root mean squared error of prediction <2.64 µg Hb mg−1 faeces) for haemoglobin quantification using two spectrometers. The prediction results from support vector machine regression further improved the prediction of haemoglobin in moist sheep faeces (r 2 p > 0.87 and root mean squared error of prediction <2.00 µg haemoglobin mg−1 faeces). Based on a threshold for anthelmintic treatment of 3 µg Hb mg−1 faeces, both the partial least square and support vector machine models showed high sensitivity (89%) and high specificity (>77%). The specificity of the prediction model for detecting haemoglobin in sheep faeces may be improved by adding more variations in faecal composition into the calibration model. Our success in detecting haemoglobin in sheep faeces, following minimal sample preparation, suggests that with further development, vis–near infrared spectroscopy can provide a sensitive and convenient method for on-farm diagnosis of H. contortus infections.

Application of Near Infrared Spectroscopy in the Analysis of Printing Color Detection

2012 ◽  
Vol 262 ◽  
pp. 59-64
Author(s):  
Hong Wei Lu ◽  
Hong He ◽  
Jun Ji ◽  
Guo Qiang Liu ◽  
Ying Hu
Keyword(s):  
Infrared Spectroscopy ◽  
Near Infrared Spectroscopy ◽  
Near Infrared ◽  
Nir Spectroscopy ◽  
Partial Least Square ◽  
Least Square ◽  
Color Parameters ◽  
Detection Model ◽  
Color Detection ◽  
Validation Set

For the fast and exact detection of printing color, we combine the near infrared (NIR) spectroscopy technique with partial least square (PLS) to build the detection model of printing color. Applying the 144 samples of spectral curve which obtained by the near infrared spectroscopy randomly separated into calibration set and validation set, and base on the 120 calibration set data to establish the prediction model of printing color by PLS, then this model is employed for predicting the color of the 24 validation set. The RMSEC of the 24 blocks’ color parameters L*, a*, b*, E are 0.73, 2.26, 3.03 and 1.09 respectively; The RMSEP are 0.97, 2.77, 3.57 and 1.34 respectively. Those results tell that the NIR spectrum and blocks’ color parameters L*, a*, b*, E could accurately establish a quantitative regression model, applying such model also can accurately predict unknown samples, and the results approximate to the original reference data. The use of near infrared spectroscopy to detect the printed matter nondestructively is feasible, and lays the foundation for the further analysis and establishment of printing chroma model.

Sign in / Sign up

Export Citation Format

Share Document