scholarly journals Development of Au-Nanoprobes Combined with Loop-Mediated Isothermal Amplification for Detection of Isoniazid Resistance in Mycobacterium tuberculosis

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Jutturong Ckumdee ◽  
Thongchai Kaewphinit ◽  
Kosum Chansiri ◽  
Somchai Santiwatanakul
Keyword(s):  
Mycobacterium Tuberculosis ◽  
Multidrug Resistant ◽  
Isothermal Amplification ◽  
Clinical Samples ◽  
Isoniazid Resistance ◽  
Loop Mediated Isothermal Amplification ◽  
Specificity And Sensitivity ◽  
Mdr Tb ◽  
Induced Aggregation ◽  
Specific Sequences

Multidrug resistant tuberculosis (MDR-TB) is Mycobacterium tuberculosis that does not respond to isoniazid and rifampicin, so the condition worsens continuously and creates difficulties for treatment by public health control programmes, especially in developing countries. The real time polymerase chain reaction (PCR) combined with agarose gel electrophoresis or strip tests is useful molecular tools for diagnosis of MDR-TB. Novel loop-mediated isothermal amplification (LAMP) can also detect drug resistance, which is a one-point mutation, by designing inner primers of 5′ end specific with the mutant. Au-nanoprobes on hybridisation with LAMP products containing target-specific sequences remain red, whereas test samples without specific sequences in the probe turn purple due to salt-induced aggregation of the Au-nanoprobes. In this study, a strategy was designed based on the LAMP of a DNA sample coupled to specific Au-nanoprobes, which showed the potential to provide a rapid and sensitive method for detecting isoniazid resistance at katG gene position 315 (G→C). 46 clinical samples were tested and showed 100% specificity and sensitivity compared with Genotype® MDR-TB Plus. This method was advantageous because it is rapid, cheap, specific, and sensitive. Further, it does not require thermal cycles for MDR-TB detection.

scholarly journals A Novel Reverse Transcription Loop-Mediated Isothermal Amplification Method for Rapid Detection of SARS-CoV-2

2020 ◽  
Vol 21 (8) ◽  
pp. 2826 ◽  
Author(s):  
Renfei Lu ◽  
Xiuming Wu ◽  
Zhenzhou Wan ◽  
Yingxue Li ◽  
Xia Jin ◽  
...  
Keyword(s):  
Real Time ◽  
Reverse Transcription ◽  
Limit Of Detection ◽  
Lamp Assay ◽  
Isothermal Amplification ◽  
Qpcr Assay ◽  
N Gene ◽  
Clinical Samples ◽  
Loop Mediated Isothermal Amplification ◽  
Specificity And Sensitivity

COVID-19 has become a major global public health burden, currently causing a rapidly growing number of infections and significant morbidity and mortality around the world. Early detection with fast and sensitive assays and timely intervention are crucial for interrupting the spread of the COVID-19 virus (SARS-CoV-2). Using a mismatch-tolerant amplification technique, we developed a simple, rapid, sensitive and visual reverse transcription loop-mediated isothermal amplification (RT-LAMP) assay for SARS-CoV-2 detection based on its N gene. The assay has a high specificity and sensitivity, and robust reproducibility, and its results can be monitored using a real-time PCR machine or visualized via colorimetric change from red to yellow. The limit of detection (LOD) of the assay is 118.6 copies of SARS-CoV-2 RNA per 25 μL reaction. The reaction can be completed within 30 min for real-time fluorescence monitoring, or 40 min for visual detection when the template input is more than 200 copies per 25 μL reaction. To evaluate the viability of the assay, a comparison between the RT-LAMP and a commercial RT-qPCR assay was made using 56 clinical samples. The SARS-CoV-2 RT-LAMP assay showed perfect agreement in detection with the RT-qPCR assay. The newly-developed SARS-CoV-2 RT-LAMP assay is a simple and rapid method for COVID-19 surveillance.

scholarly journals Rapid Detection of Clostridium botulinum in Food Using Loop-Mediated Isothermal Amplification (LAMP)

2021 ◽  
Vol 18 (9) ◽  
pp. 4401
Author(s):  
Yufei Chen ◽  
Hao Li ◽  
Liu Yang ◽  
Lei Wang ◽  
Ruyi Sun ◽  
...  
Keyword(s):  
Rapid Detection ◽  
High Throughput Screening ◽  
Clostridium Botulinum ◽  
Lamp Assay ◽  
High Specificity ◽  
Isothermal Amplification ◽  
Clinical Samples ◽  
Loop Mediated Isothermal Amplification ◽  
Specificity And Sensitivity ◽  
Target Dna

Botulinum neurotoxins are considered as one of the most potent toxins and are produced by Clostridium botulinum. It is crucial to have a rapid and sensitive method to detect the bacterium Clostridium botulinum in food. In this study, a rapid detection assay of C. botulinum in food using loop-mediated isothermal amplification (LAMP) technology was developed. The optimal primers were identified among three sets of primers designed specifically based on the partial ntnh gene encoding nontoxic-nonhaemagglutinin (NTNH) for rapid detection of the target DNA in plasmids. The optimal temperature and reaction time of the LAMP assay were determined to be 64 °C and 60 min, respectively. The chemical kit could be assembled based on these optimized reaction conditions for quick, initial high-throughput screening of C. botulinum in food samples. The established LAMP assay showed high specificity and sensitivity in detecting the target DNA with a limit of 0.0001 pg/ul (i.e., ten times more sensitive than that of the PCR method) and an accuracy rate of 100%. This study demonstrated a potentially rapid, cost-effective, and easy-operating method to detect C. botulinum in food and clinical samples based on LAMP technology.

scholarly journals Development and evaluation of a multiplex loop-mediated isothermal amplification (LAMP) assay for differentiation of Mycobacterium tuberculosis and non-tuberculosis mycobacterium in clinical samples

PLoS ONE ◽  
2021 ◽  
Vol 16 (1) ◽  
pp. e0244753
Author(s):  
Jeeyong Kim ◽  
Borae G. Park ◽  
Da Hye Lim ◽  
Woong Sik Jang ◽  
Jeonghun Nam ◽  
...  
Keyword(s):  
Mycobacterium Tuberculosis ◽  
Real Time ◽  
Positive Reaction ◽  
Real Time Pcr ◽  
Lamp Assay ◽  
Isothermal Amplification ◽  
Clinical Samples ◽  
Published Data ◽  
Analytical Sensitivity ◽  
Loop Mediated Isothermal Amplification

Introduction The rapid and accurate diagnosis of tuberculosis (TB) is important to reduce morbidity and mortality rates and risk of transmission. Therefore, molecular detection methods such as a real-time PCR–based assay for Mycobacterium tuberculosis (MTB) have been commonly used for diagnosis of TB. Loop-mediated isothermal amplification (LAMP) assay was believed to be a simple, quick, and cost-effective isothermal nucleic acid amplification diagnostic test for infectious diseases. In this study, we designed an in-house multiplex LAMP assay for the differential detection of MTB and non-tuberculosis mycobacterium (NTM), and evaluated the assay using clinical samples. Material and methods For the multiplex LAMP assay, two sets of specific primers were designed: the first one was specific for IS6110 genes of MTB, and the second one was universal for rpoB genes of mycobacterium species including NTM. MTB was confirmed with a positive reaction with both primer sets, and NTM was identified with a positive reaction by only the second primer set without a MTB-specific reaction. Total 333 clinical samples were analyzed to evaluate the multiplex LAMP assay. Clinical samples were composed of 195 positive samples (72 MTB and 123NTM) and 138 negative samples. All samples were confirmed positivity or negativity by real-time PCR for MTB and NTM. Analytical sensitivity and specificity were evaluated for the multiplex LAMP assay in comparison with acid fast bacilli staining and the culture method. Results Of 123 NTM samples, 121 were identified as NTM and 72/72 MTB were identified as MTB by the multiplex LAMP assay. False negative reactions were seen only in two NTM positive samples with co-infection of Candida spp. All 138 negative samples were identified as negative for MTB and NTM. Analytical sensitivity of the multiplex LAMP assay was 100% (72/72) for MTB, and 98.4% (121/123) for NTM. And the specificity of assay was 100% (138/138) for all. Conclusions Our newly designed multiplex LAMP assay for MTB and NTM showed relatively good sensitivity in comparison with previously published data to detect isolated MTB. This multiplex LAMP assay is expected to become a useful tool for detecting and differentiating MTB from NTM rapidly at an acceptable sensitivity.

Development and application of loop-mediated isothermal amplification label-based nanoparticles lateral flow biosensor for detection of Mycobacterium tuberculosis

2019 ◽  
Author(s):  
Xingyun Wang ◽  
Yi Wang ◽  
Weiwei Jiao ◽  
Guirong Wang ◽  
Yacui Wang ◽  
...  
Keyword(s):  
Mycobacterium Tuberculosis ◽  
Diagnostic Technique ◽  
Cost Effective ◽  
Cross Reactivity ◽  
Lateral Flow ◽  
Isothermal Amplification ◽  
Clinical Samples ◽  
High Morbidity ◽  
Analytical Sensitivity ◽  
Loop Mediated Isothermal Amplification

Abstract Tuberculosis is a serious disease with high morbidity and mortality, thus rapid and cost-effective diagnostic test for Mycobacterium tuberculosis (MTB) is urgently needed. Here, a novel detection diagnostic technique, termed as loop-mediated isothermal amplification label-based nanoparticles with lateral flow biosensor (LAMP-LFB), was developed and evaluated for rapid, reliable and objective detection of MTB. Two sets of primers, which targeted IS 6110 and IS 1081 sequences of MTB, were simultaneously designed for establishment of LAMP-LFB assay. The optimal reaction conditions of MTB-LAMP-LFB assay confirmed were 66ºC for only 50min. The analytical sensitivity of MTB-LAMP-LFB is 10fg of genomic templates in pure culture, and the detection results obtained from LFB was in conformity with agarose gel electrophoresis. No cross-reactivity with other common bacteria and non-tuberculous mycobacteria strains (NTM) was obtained. A total of 158 clinical samples were collected from presumptive 158 TB patients, were used for evaluating the feasibility of MTB-LAMP-LFB assay. Among 98 TB patients diagnosed with composite reference standard, the positive rate for MTB detection using liquid culture, Xpert MTB/RIF and LAMP-LFB were 40.0% (39/98), 50.0% (48/98), and 86.7% (85/98), respectively. Among 39 culture confirmed samples, 84.6% (33/39) cases were Xpert MTB/RIF-positive and 92.3% (36/39) were LAMP-LFB-positive. For the 59 clinically diagnosed TB cases 25.4% (15/59) and 83.0% (49/59) were Xpert MTB/RIF-positive and LAMP-LFB positive, respectively. Therefore, MTB-LAMP-LFB assay is a simple, reliable, and sensitive method for MTB detection and maybe prospective in early diagnosis of MTB.

scholarly journals Development and Preliminary Application of Multiplex Loop-Mediated Isothermal Amplification Coupled With Lateral Flow Biosensor for Detection of Mycobacterium tuberculosis Complex

2021 ◽  
Vol 11 ◽  
Author(s):  
Xingyun Wang ◽  
Guirong Wang ◽  
Yacui Wang ◽  
Shuting Quan ◽  
Hui Qi ◽  
...  
Keyword(s):  
Mycobacterium Tuberculosis ◽  
Mycobacterium Tuberculosis Complex ◽  
Fluorescein Isothiocyanate ◽  
Cross Reactivity ◽  
Lateral Flow ◽  
Isothermal Amplification ◽  
Clinical Samples ◽  
Analytical Sensitivity ◽  
Tuberculosis Complex ◽  
Loop Mediated Isothermal Amplification

The aim of this study was to develop a simple and reliable method to detect Mycobacterium tuberculosis complex (MTBC) and verify its clinical application preliminarily. A loop-mediated isothermal amplification method coupled with lateral flow biosensor (LAMP-LFB) assay, was developed and evaluated for detection of MTBC. Two sets of primers, which targeted IS6110 and IS1081 sequences of MTBC, were designed for establishment of multiplex LAMP-LFB assay. The amplicons were labelled with biotin and fluorescein isothiocyanate (FITC) by adding FITC labelled primer and biotin-14-dATP and biotin-14-dCTP and could be visualized using LFB. The optimal reaction conditions of multiplex LAMP-LFB assay confirmed were 66°C for 50 min. The analytical sensitivity of multiplex LAMP-LFB is 10 fg of genomic templates using pure culture, and no cross-reactivity with other common bacteria and non-tuberculous mycobacteria strains was obtained. A total of 143 clinical samples collected from 100 TB patients (62 definite TB cases and 38 probable TB cases) and 43 non-TB patients were used for evaluating the feasibility of multiplex LAMP-LFB assay. The multiplex LAMP-LFB (82.0%, 82/100) showed higher sensitivity than culture (47.0%, 47/100, P < 0.001) and Xpert MTB/RIF (54.0%, 54/100, P < 0.001). Importantly, the multiplex LAMP-LFB assay detected additional 28 probable TB cases, which increased the percentage of definite TB cases from 62.0% (62/100) to 90.0% (90/100). The specificity of multiplex LAMP-LFB assay in patients without TB was 97.7% (42/43). Therefore, multiplex LAMP-LFB assay is a simple, reliable, and sensitive method for MTBC detection, especially in probable TB cases and resource limited settings.

scholarly journals Rapid Molecular Diagnosis of Tuberculosis and Its Resistance to Rifampicin and Isoniazid with Automated MDR/MTB ELITe MGB® Assay

Antibiotics ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 797
Author(s):  
Vichita Ok ◽  
Alexandra Aubry ◽  
Florence Morel ◽  
Isabelle Bonnet ◽  
Jérôme Robert ◽  
...  
Keyword(s):  
Drug Susceptibility ◽  
Multidrug Resistant ◽  
Drug Susceptibility Testing ◽  
Clinical Samples ◽  
Great Promise ◽  
Routine Practice ◽  
Pcr Assay ◽  
Perfect Agreement ◽  
Mdr Tb ◽  
Good Agreement

The MDR/MTB ELITe MGB® kit (ELITech) carried on the ELITe InGenius® platform is a new real-time PCR assay allowing automated extraction and detection of DNA of the Mycobacterium tuberculosis complex (MTB) and mutations in the rpoB and katG genes and inhA promoter region (pro-inhA) associated to resistance to rifampicin and isoniazid, the two markers of multidrug-resistant TB (MDR). We assessed the performances of the test on a collection of strains (n = 54) and a set of clinical samples (n = 242) from routine practice, comparatively to TB diagnosis and genotypic drug susceptibility testing (gDST) as references. Regarding the 242 clinical samples, the sensitivity and specificity of MTB detection by ELITe were 90.9% and 97.5%, respectively. For the detection of resistance-conferring mutations on positive clinical samples, we observed perfect agreement with gDST for katG and pro-inhA (κ = 1.0) and two discordant results for rpoB (κ = 0.82). Considering the 54 cultured strains, very good agreement with gDST was observed for the detection of the 25 distinct mutations in rpoB, katG, and pro-inhA, (κ = 0.95, 0.88, and 0.95, respectively). In conclusion, the automated MDR/MTB ELITe MGB® assay shows great promise and appears to be a valuable tool for rapid detection of pre-MDR- and MDR-TB directly from clinical specimens.

scholarly journals Analysis of drug resistance and mutation profiles in Mycobacterium tuberculosis isolates in a surveillance site in Beijing, China

2021 ◽  
Vol 49 (1) ◽  
pp. 030006052098493
Author(s):  
Jie Zhang ◽  
Yixuan Ren ◽  
Liping Pan ◽  
Junli Yi ◽  
Tong Guan ◽  
...  
Keyword(s):  
Drug Resistance ◽  
Mycobacterium Tuberculosis ◽  
Drug Testing ◽  
Multidrug Resistant ◽  
High Rate ◽  
Drug Resistant ◽  
Surveillance Site ◽  
Mdr Tb ◽  
Previously Treated Patients ◽  
Beijing China

Objective This study analyzed drug resistance and mutations profiles in Mycobacterium tuberculosis isolates in a surveillance site in Huairou District, Beijing, China. Methods The proportion method was used to assess drug resistance profiles for four first-line and seven second-line anti-tuberculosis (TB) drugs. Molecular line probe assays were used for the rapid detection of resistance to rifampicin (RIF) and isoniazid (INH). Results Among 235 strains of M. tuberculosis, 79 (33.6%) isolates were resistant to one or more drugs. The isolates included 18 monoresistant (7.7%), 19 polyresistant (8.1%), 28 RIF-resistant (11.9%), 24 multidrug-resistant (MDR) (10.2%), 7 pre-extensively drug-resistant (XDR, 3.0%), and 2 XDR strains (0.9%). A higher rate of MDR-TB was detected among previously treated patients than among patients with newly diagnosed TB (34.5% vs. 6.8%). The majority (62.5%) of RIF-resistant isolates exhibited a mutation at S531L in the DNA-dependent RNA polymerase gene. Meanwhile, 62.9% of INH-resistant isolates carried a mutation at S315T1 in the katG gene. Conclusion Our results confirmed the high rate of drug-resistant TB, especially MDR-TB, in Huairou District, Beijing, China. Therefore, detailed drug testing is crucial in the evaluation of MDR-TB treatment.

scholarly journals Detection of mutations associated with isoniazid resistance in multidrug-resistant Mycobacterium tuberculosis clinical isolates

2014 ◽  
Vol 69 (9) ◽  
pp. 2369-2375 ◽  
Author(s):  
Tomasz Jagielski ◽  
Zofia Bakuła ◽  
Katarzyna Roeske ◽  
Michał Kamiński ◽  
Agnieszka Napiórkowska ◽  
...  
Keyword(s):  
Mycobacterium Tuberculosis ◽  
Multidrug Resistant ◽  
Clinical Isolates ◽  
Isoniazid Resistance ◽  
Detection Of Mutations

scholarly journals Essential properties and pitfalls of colorimetric Reverse Transcription Loop-mediated Isothermal Amplification as a point-of-care test for SARS-CoV-2 diagnosis

2021 ◽  
Vol 27 (1) ◽  
Author(s):  
Bruna de Oliveira Coelho ◽  
Heloisa Bruna Soligo Sanchuki ◽  
Dalila Luciola Zanette ◽  
Jeanine Marie Nardin ◽  
Hugo Manuel Paz Morales ◽  
...  
Keyword(s):  
Viral Load ◽  
Internal Control ◽  
Reverse Transcription ◽  
Color Change ◽  
Point Of Care ◽  
Colorimetric Detection ◽  
False Negative ◽  
Isothermal Amplification ◽  
Clinical Samples ◽  
Loop Mediated Isothermal Amplification

Abstract Background SARS-CoV-2 Reverse Transcription Loop-mediated Isothermal Amplification (RT-LAMP) colorimetric detection is a sensitive and specific point-of-care molecular biology technique used to detect the virus in only 30 min. In this manuscript we have described a few nuances of the technique still not properly described in the literature: the presence of three colors clusters; the correlation of the viral load with the color change; and the importance of using an internal control to avoid false-negative results. Methods To achieve these findings, we performed colorimetric RT-LAMP assays of 466 SARS-CoV-2 RT-qPCR validated clinical samples, with color quantification measured at 434 nm and 560 nm. Results First we determinate a sensitivity of 93.8% and specificity of 90.4%. In addition to the pink (negative) and yellow (positive) produced colors, we report for the first time the presence of an orange color cluster that may lead to wrong diagnosis. We also demonstrated using RT-qPCR and RT-LAMP that low viral loads are related to Ct values > 30, resulting in orange colors. We also demonstrated that the diagnosis of COVID-19 by colorimetric RT-LAMP is efficient until the fifth symptoms day when the viral load is still relatively high. Conclusion This study reports properties and indications for colorimetric RT-LAMP as point-of-care for SARS-CoV-2 diagnostic, reducing false results, interpretations and optimizing molecular diagnostics tests application.

Sign in / Sign up

Export Citation Format

Share Document