scholarly journals Vibrational Spectroscopy of Binary Titanium Borides: First-Principles and Experimental Studies

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Urszula D. Wdowik ◽  
Agnieszka Twardowska ◽  
Bogusław Rajchel
Keyword(s):  
Raman Spectra ◽  
First Principles ◽  
Experimental Studies ◽  
Powder Materials ◽  
Sintering Aids ◽  
X Ray Diffraction ◽  
Vibrational Dynamics ◽  
Titanium Borides ◽  
Impurity Phases ◽  
By Products

Vibrational dynamics of binary titanium borides is studied from first-principles. Polarized and unpolarized Raman spectra of TiB, TiB2, and Ti3B4 are reported along with the experimental spectra of commercial powder and bulk TiB2 containing less than 1 wt.% of impurity phases. The X-ray diffraction spectroscopy, applied for phase composition examination of both bulk and powder materials, identifies only the TiB2 phase. The simulated Raman spectra together with literature data support interpretation and refinement of experimental spectra which reveal components arising from titanium dioxide (TiO2) and amorphous boron carbide (B4C) impurity phases as well as graphitic carbon. These contaminations are the by-products of synthesis, consolidation, and sintering aids employed to fabricate powder and bulk titanium diboride.

scholarly journals Structural and electronic properties of the spinel Li4Ti5O12

2019 ◽  
Vol 20 (46) ◽  
pp. 7-12 ◽  
Author(s):  
Sarantuya Lkhagvajav ◽  
Namsrai Tsogbadrakh ◽  
Enkhjargal Enkhbayar ◽  
Sevjidsuren Galsan ◽  
Pagvajav Altantsog
Keyword(s):  
Electronic Properties ◽  
First Principles ◽  
Density Functional ◽  
Experimental Studies ◽  
First Principles Calculations ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structural And Electronic Properties ◽  
Hubbard U ◽  
Uv Visible

In this study, the structure and electronic properties of the spinel compound Li4Ti5O12 (LTO) are investigated both theoretical and experimental methods. The experimental studies of structural and electronic properties were performed by X-ray diffraction and UV-visible spectroscopy. The first principles calculations allowed to establish the relationship between the structure and electronic properties. The spinel type structure of LTO is refined by the Rietveld analysis using the X-ray diffraction (XRD). The band gap of LTO was determined to be 3.55 eV using the UV-visible absorption spectra. The Density functional theory (DFT) augmented without and with the Hubbard U correction (GGA and GGA +U+J0) is used to elucidate the electronic structure of LTO. We have performed systematic studies of the first principles calculations based on the GGA and GGA+U for the crystal structure and electronic properties of spinel LTO. We propose that a Hubbard U correction improves the DFT results.

Furnace Annealed Thin Films of Plasma Enhanced Chemical Vapor Deposited Titanium Borides on Silicon

1986 ◽  
Vol 71 ◽  
Author(s):  
L. M. Williams
Keyword(s):  
Thin Films ◽  
Chemical Vapor ◽  
Silicon Substrates ◽  
X Ray Diffraction ◽  
Titanium Borides ◽  
Chemical Vapor Deposited ◽  
Diffraction Peaks ◽  
By Products ◽  
Deposited Films ◽  
Anneal Time

AbstractThin films of titanium borides, deposited onto silicon substrates at 600 °C using plasma enhanced chemical vapor deposition, were annealed in a furnace at temperatures from 700 °(C to 990 °C. Structural properties and electronic properties were measured for the annealed films and the asdeposited films for comparison. Sheet resistances for the films show about a 35% decrease after anneals at 990 °(C. The reduction in sheet resistance appears to be relatively insensitive to the length of the anneal time. X-ray diffraction spectra of the as-deposited films show no peaks that are attributable to crystalline titanium borides; however, there are diffraction peaks that are believed to be caused by products from reactions between the titanium borides and the silicon substrate during deposition. There is evidence that crystalline titanium diboride may start to form during the anneal at 990 °C.

Control of the phase composition of advanced calcium phosphates using an x-ray diffractometer with a curved position-sensitive detector

2020 ◽  
Vol 86 (6) ◽  
pp. 29-35
Author(s):  
V. P. Sirotinkin ◽  
O. V. Baranov ◽  
A. Yu. Fedotov ◽  
S. M. Barinov
Keyword(s):  
Phase Composition ◽  
Calcium Phosphates ◽  
Position Sensitive Detector ◽  
Sensitive Detector ◽  
X Ray Diffraction ◽  
X Ray ◽  
Impurity Phases ◽  
Position Sensitive ◽  
Diffraction Peaks ◽  
Diffraction Patterns

The results of studying the phase composition of advanced calcium phosphates Ca10(PO4)6(OH)2, β-Ca3(PO4)2, α-Ca3(PO4)2, CaHPO4 · 2H2O, Ca8(HPO4)2(PO4)4 · 5H2O using an x-ray diffractometer with a curved position-sensitive detector are presented. Optimal experimental conditions (angular positions of the x-ray tube and detector, size of the slits, exposure time) were determined with allowance for possible formation of the impurity phases during synthesis. The construction features of diffractometers with a position-sensitive detector affecting the profile characteristics of x-ray diffraction peaks are considered. The composition for calibration of the diffractometer (a mixture of sodium acetate and yttrium oxide) was determined. Theoretical x-ray diffraction patterns for corresponding calcium phosphates are constructed on the basis of the literature data. These x-ray diffraction patterns were used to determine the phase composition of the advanced calcium phosphates. The features of advanced calcium phosphates, which should be taken into account during the phase analysis, are indicated. The powder of high-temperature form of tricalcium phosphate strongly adsorbs water from the environment. A strong texture is observed on the x-ray diffraction spectra of dicalcium phosphate dihydrate. A rather specific x-ray diffraction pattern of octacalcium phosphate pentahydrate revealed the only one strong peak at small angles. In all cases, significant deviations are observed for the recorded angular positions and relative intensity of the diffraction peaks. The results of the study of experimentally obtained mixtures of calcium phosphate are presented. It is shown that the graphic comparison of experimental x-ray diffraction spectra and pre-recorded spectra of the reference calcium phosphates and possible impurity phases is the most effective method. In this case, there is no need for calibration. When using this method, the total time for analysis of one sample is no more than 10 min.

Site preference and atomic ordering in the ternary Rh5Ga2As: first-principles calculations

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Nilanjan Roy ◽  
Sucharita Giri ◽  
Harshit ◽  
Partha P. Jana
Keyword(s):  
Total Energy ◽  
First Principles ◽  
Density Functional ◽  
Structure Type ◽  
Site Preference ◽  
X Ray Diffraction ◽  
Atomic Ordering ◽  
Functional Theory ◽  
The Stability ◽  
Bonding Characteristics

Abstract The site preference and atomic ordering of the ternary Rh5Ga2As have been investigated using first-principles density functional theory (DFT). An interesting atomic ordering of two neighboring elements Ga and As reported in the structure of Rh5Ga2As by X-ray diffraction data only is confirmed by first-principles total-energy calculations. The previously reported experimental model with Ga/As ordering is indeed the most stable in the structure of Rh5Ga2As. The calculation detected that there is an obvious trend concerning the influence of the heteroatomic Rh–Ga/As contacts on the calculated total energy. Interestingly, the orderly distribution of As and Ga that is found in the binary GaAs (Zinc-blende structure type), retained to ternary Rh5Ga2As. The density of states (DOS) and Crystal Orbital Hamiltonian Population (COHP) are calculated to enlighten the stability and bonding characteristics in the structure of Rh5Ga2As. The bonding analysis also confirms that Rh–Ga/As short contacts are the major driving force towards the overall stability of the compound.

scholarly journals Structural and physical properties of 99 complex bulk chalcogenides crystals using first-principles calculations

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Sahib Hasan ◽  
Khagendra Baral ◽  
Neng Li ◽  
Wai-Yim Ching
Keyword(s):  
Mechanical Properties ◽  
Physical Properties ◽  
First Principles ◽  
Experimental Studies ◽  
First Principles Calculations ◽  
Chalcogenide Semiconductors ◽  
Optical And Mechanical Properties ◽  
Very Large Database ◽  
Unique Composition ◽  
Fundamental Physical

AbstractChalcogenide semiconductors and glasses have many applications in the civil and military fields, especially in relation to their electronic, optical and mechanical properties for energy conversion and in enviormental materials. However, they are much less systemically studied and their fundamental physical properties for a large class chalcogenide semiconductors are rather scattered and incomplete. Here, we present a detailed study using well defined first-principles calculations on the electronic structure, interatomic bonding, optical, and mechanical properties for 99 bulk chalcogenides including thirteen of these crytals which have never been calculated. Due to their unique composition and structures, these 99 bulk chalcogenides are divided into two main groups. The first group contains 54 quaternary crystals with the structure composition (A2BCQ4) (A = Ag, Cu; B = Zn, Cd, Hg, Mg, Sr, Ba; C = Si, Ge, Sn; Q = S, Se, Te), while the second group contains scattered ternary and quaternary chalcogenide crystals with a more diverse composition (AxByCzQn) (A = Ag, Cu, Ba, Cs, Li, Tl, K, Lu, Sr; B = Zn, Cd, Hg, Al, Ga, In, P, As, La, Lu, Pb, Cu, Ag; C = Si, Ge, Sn, As, Sb, Bi, Zr, Hf, Ga, In; Q = S, Se, Te; $$\hbox {x} = 1$$ x = 1 , 2, 3; $$\hbox {y} = 0$$ y = 0 , 1, 2, 5; $$\hbox {z} = 0$$ z = 0 , 1, 2 and $$\hbox {n} = 3$$ n = 3 , 4, 5, 6, 9). Moreover, the total bond order density (TBOD) is used as a single quantum mechanical metric to characterize the internal cohesion of these crystals enabling us to correlate them with the calculated properties, especially their mechanical properties. This work provides a very large database for bulk chalcogenides crucial for the future theoretical and experimental studies, opening opportunities for study the properties and potential application of a wide variety of chalcogenides.

scholarly journals The crystal structures and mechanical properties of the uranyl carbonate minerals roubaultite, fontanite, sharpite, widenmannite, grimselite and čejkaite

2020 ◽  
Vol 7 (21) ◽  
pp. 4197-4221 ◽  
Author(s):  
Francisco Colmenero ◽  
Jakub Plášil ◽  
Jiří Sejkora
Keyword(s):  
Mechanical Properties ◽  
Hydrogen Bonding ◽  
Diffraction Pattern ◽  
Crystal Structures ◽  
First Principles ◽  
X Ray Diffraction ◽  
Carbonate Minerals ◽  
X Ray ◽  
Uranyl Carbonate

The structure, hydrogen bonding, X-ray diffraction pattern and mechanical properties of six important uranyl carbonate minerals, roubaultite, fontanite, sharpite, widenmannite, grimselite and čejkaite, are determined using first principles methods.

Sign in / Sign up

Export Citation Format

Share Document