scholarly journals Rolling Bearing Reliability Assessment via Kernel Principal Component Analysis and Weibull Proportional Hazard Model

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Fengtao Wang ◽  
Xutao Chen ◽  
Bosen Dun ◽  
Bei Wang ◽  
Dawen Yan ◽  
...  
Keyword(s):  
Principal Component Analysis ◽  
Frequency Domain ◽  
Reliability Assessment ◽  
Principal Component ◽  
Component Analysis ◽  
Performance Degradation ◽  
Assessment Model ◽  
Kernel Principal Component Analysis ◽  
Engineering Project ◽  
Time Frequency

Reliability assessment is a critical consideration in equipment engineering project. Successful reliability assessment, which is dependent on selecting features that accurately reflect performance degradation as the inputs of the assessment model, allows for the proactive maintenance of equipment. In this paper, a novel method based on kernel principal component analysis (KPCA) and Weibull proportional hazards model (WPHM) is proposed to assess the reliability of rolling bearings. A high relative feature set is constructed by selecting the effective features through extracting the time domain, frequency domain, and time-frequency domain features over the bearing’s life cycle data. The kernel principal components which can accurately reflect the performance degradation process are obtained by KPCA and then input as the covariates of WPHM to assess the reliability. An example was conducted to validate the proposed method. The differences in manufacturing, installation, and working conditions of the same type of bearings during reliability assessment are reduced after extracting relative features, which enhances the practicability and stability of the proposed method.

scholarly journals Fault diagnosis of bearing based on the kernel principal component analysis and optimized k-nearest neighbour model

2017 ◽  
Vol 36 (4) ◽  
pp. 354-365 ◽  
Author(s):  
Shaojiang Dong ◽  
Tianhong Luo ◽  
Li Zhong ◽  
Lili Chen ◽  
Xiangyang Xu
Keyword(s):  
Principal Component Analysis ◽  
Particle Swarm Optimization ◽  
Particle Swarm ◽  
Principal Component ◽  
Component Analysis ◽  
Kernel Principal Component Analysis ◽  
Frequency Domain Method ◽  
Nearest Neighbour ◽  
Swarm Optimization ◽  
Time Frequency

Aiming to identify the bearing faults level effectively, a new method based on kernel principal component analysis and particle swarm optimization optimized k-nearest neighbour model is proposed. First, the gathered vibration signals are decomposed by time–frequency domain method, i.e., local mean decomposition; as a result, the product functions decomposed from the original signal are derived. Then, the entropy values of the product functions are calculated by Shannon method, which will work as the input features for k-nearest neighbour model. The kernel principal component analysis model is used to reduce the dimension of the features, and then the k-nearest neighbour model which was optimized by the particle swarm optimization method is used to identify the bearing fault levels. Case of test and actually collected signal are analysed. The results validate the effectiveness of the proposed algorithm.

scholarly journals Monitoring a Reverse Osmosis Process with Kernel Principal Component Analysis: A Preliminary Approach

2021 ◽  
Vol 11 (14) ◽  
pp. 6370
Author(s):  
Elena Quatrini ◽  
Francesco Costantino ◽  
David Mba ◽  
Xiaochuan Li ◽  
Tat-Hean Gan
Keyword(s):  
Principal Component Analysis ◽  
Fault Detection ◽  
Water Purification ◽  
Principal Component ◽  
Temporal Correlation ◽  
Component Analysis ◽  
Kernel Principal Component Analysis ◽  
Original Dataset ◽  
Monitoring Process ◽  
Machine Health

The water purification process is becoming increasingly important to ensure the continuity and quality of subsequent production processes, and it is particularly relevant in pharmaceutical contexts. However, in this context, the difficulties arising during the monitoring process are manifold. On the one hand, the monitoring process reveals various discontinuities due to different characteristics of the input water. On the other hand, the monitoring process is discontinuous and random itself, thus not guaranteeing continuity of the parameters and hindering a straightforward analysis. Consequently, further research on water purification processes is paramount to identify the most suitable techniques able to guarantee good performance. Against this background, this paper proposes an application of kernel principal component analysis for fault detection in a process with the above-mentioned characteristics. Based on the temporal variability of the process, the paper suggests the use of past and future matrices as input for fault detection as an alternative to the original dataset. In this manner, the temporal correlation between process parameters and machine health is accounted for. The proposed approach confirms the possibility of obtaining very good monitoring results in the analyzed context.

Data Mining in Analysis of Biomechanical Signals

2009 ◽  
Vol 147-149 ◽  
pp. 588-593 ◽  
Author(s):  
Marcin Derlatka ◽  
Jolanta Pauk
Keyword(s):  
Data Mining ◽  
Principal Component Analysis ◽  
Cerebral Palsy ◽  
Spina Bifida ◽  
Decision Tree ◽  
Principal Component ◽  
Data Preprocessing ◽  
Component Analysis ◽  
Kernel Principal Component Analysis

In the paper the procedure of processing biomechanical data has been proposed. It consists of selecting proper noiseless data, preprocessing data by means of model’s identification and Kernel Principal Component Analysis and next classification using decision tree. The obtained results of classification into groups (normal and two selected pathology of gait: Spina Bifida and Cerebral Palsy) were very good.

Sign in / Sign up

Export Citation Format

Share Document