scholarly journals Biocompatibility Assessment of Poly(lactic acid) Films after Sterilization with Ethylene Oxide in Histological Study In Vivo with Wistar Rats and Cellular Adhesion of Fibroblasts In Vitro

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Michele Savaris ◽  
Gustavo L. Braga ◽  
Venina dos Santos ◽  
Glaucio A. Carvalho ◽  
Asdrubal Falavigna ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Cell Adhesion ◽  
Ethylene Oxide ◽  
Wistar Rats ◽  
Histological Study ◽  
Surrounding Tissue ◽  
Poly Lactic Acid ◽  
Cytotoxicity Test

Biomaterials must meet certain fundamental requirements for their usage in living beings, such as biocompatibility, bifunctionality, and sterilizability, without having chemical and structural changes. The biocompatibility of poly(lactic acid) (PLA) films, shaped by compression, was evaluated after sterilization by ethylene oxide by a histological in vivo test with Wistar rats and cytotoxicity in cell adhesion in vitro. The cytotoxicity test was performed by the reduction of tetrazolium salt (MTT). Thermal and chemical changes in PLA films concerning the proposed sterilization process and characteristics were not observed to evidence polymer degradation due to sterilization. The analysis of the cytotoxicity by the MTT method has shown that the sterilized PLA films are not cytotoxic. The adhesion and proliferation of fibroblasts on PLA films were homogeneously distributed over the evaluation period, showing an elongated appearance with unnumbered cytoplasmic extensions and cell-cell interactions. By examining the biocompatibility in a histological study, a mild tissue inflammation was observed with the presence of fibrosis in the samples that had been exposed for 21 days in the rats’ bodies. PLA films sterilized with ethylene oxide did not exhibit cell adhesion in vitro and toxicity to the surrounding tissue in vivo and they may be used in future in vivo testing, according to histological findings in Wistar rats in the present study.

scholarly journals In Vitro and In Vivo Biosafety Analysis of Resorbable Polyglycolic Acid-Polylactic Acid Block Copolymer Composites for Spinal Fixation

Polymers ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 29
Author(s):  
Seung Kyun Yoon ◽  
Jin Ho Yang ◽  
Hyun Tae Lim ◽  
Young-Wook Chang ◽  
Muhammad Ayyoob ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Animal Experiments ◽  
Polymeric Materials ◽  
Polyglycolic Acid ◽  
Poly Lactic Acid ◽  
Skin Sensitization ◽  
Spinal Fixation ◽  
In Vivo Degradation

Herein, spinal fixation implants were constructed using degradable polymeric materials such as PGA–PLA block copolymers (poly(glycolic acid-b-lactic acid)). These materials were reinforced by blending with HA-g-PLA (hydroxyapatite-graft-poly lactic acid) and PGA fiber before being tested to confirm its biocompatibility via in vitro (MTT assay) and in vivo animal experiments (i.e., skin sensitization, intradermal intracutaneous reaction, and in vivo degradation tests). Every specimen exhibited suitable biocompatibility and biodegradability for use as resorbable spinal fixation materials.

In vitro and in vivo evaluation of clarithromycin/poly(lactic acid) microspheres for intramuscular drug delivery

1993 ◽  
Vol 26 (3) ◽  
pp. 229-238 ◽  
Author(s):  
P.K. Gupta ◽  
H. Johnson ◽  
C. Allexon
Keyword(s):  
Drug Delivery ◽  
Lactic Acid ◽  
Poly Lactic Acid ◽  
In Vivo Evaluation

Tetracycline hydrochloride-containing poly (ε-caprolactone)/poly lactic acid scaffold for bone tissue engineering application: in vitro and in vivo study

2018 ◽  
Vol 68 (8) ◽  
pp. 472-479 ◽  
Author(s):  
Saeed Farzamfar ◽  
Mahdi Naseri-Nosar ◽  
Hamed Sahrapeyma ◽  
Arian Ehterami ◽  
Arash Goodarzi ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Lactic Acid ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Engineering Application ◽  
Poly Lactic Acid ◽  
Tissue Engineering Application ◽  
Bone Tissue Engineering Application

scholarly journals In Vitro and In Vivo Studies of Biodegradability and Biocompatibility of Poly(εCL)-b-Poly(EtOEP)-Based Films

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 3039
Author(s):  
Ilya Nifant’ev ◽  
Andrey Shlyakhtin ◽  
Pavel Komarov ◽  
Alexander Tavtorkin ◽  
Evgeniya Kananykhina ◽  
...  
Keyword(s):  
Cell Adhesion ◽  
Block Copolymers ◽  
Polymer Films ◽  
Hydrolytic Stability ◽  
Polymer Materials ◽  
In Vivo Studies ◽  
Cytotoxicity Test ◽  
The Impact

The control of surface bioadhesive properties of the subcutaneous implants is essential for the development of biosensors and controlled drug release devices. Poly(alkyl ethylene phosphate)-based (co)polymers are structurally versatile, biocompatible and biodegradable, and may be regarded as an alternative to poly(ethylene glycol) (PEG) copolymers in the creation of antiadhesive materials. The present work reports the synthesis of block copolymers of ε-caprolactone (εCL) and 2-ethoxy-1,3,2-dioxaphospholane-2-oxide (ethyl ethylene phosphate, EtOEP) with different content of EtOEP fragments, preparation of polymer films, and the results of the study of the impact of EtOEP/εCL ratio on the hydrophilicity (contact angle of wetting), hydrolytic stability, cytotoxicity, protein and cell adhesion, and cell proliferation using umbilical cord multipotent stem cells. It was found that the increase of EtOEP/εCL ratio results in increase of hydrophilicity of the polymer films with lowering of the protein and cell adhesion. MTT cytotoxicity test showed no significant deviations in toxicity of poly(εCL) and poly(εCL)-b-poly(EtOEP)-based films. The influence of the length of poly(EtOEP)chain in block-copolymers on fibrotic reactions was analyzed using subcutaneous implantation experiments (Wistar line rats), the increase of the width of the fibrous capsule correlated with higher EtOEP/εCL ratio. However, the copolymer-based film with highest content of polyphosphate had been subjected to faster degradation with a formation of developed contact surface of poly(εCL). The rate of the degradation of polyphosphate in vivo was significantly higher than the rate of the degradation of polyphosphate in vitro, which only confirms an objective value of in vivo experiments in the development of polymer materials for biomedical applications.

In vitro and in vivo release of insulin from poly(lactic acid) microbeads and pellets

1986 ◽  
Vol 4 (1) ◽  
pp. 47-62 ◽  
Author(s):  
A.K. Kwong ◽  
S. Chou ◽  
A.M. Sun ◽  
M.V. Sefton ◽  
M.F.A. Goosen
Keyword(s):  
Lactic Acid ◽  
Poly Lactic Acid ◽  
In Vivo Release

scholarly journals Biocompatible Materials Based on Plasticized Poly(lactic acid), Chitosan and Rosemary Ethanolic Extract I. Effect of Chitosan on the Properties of Plasticized Poly(lactic acid) Materials

Polymers ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 941 ◽  
Author(s):  
Cornelia Vasile ◽  
Elena Stoleru ◽  
Raluca Nicoleta Darie-Niţa ◽  
Raluca Petronela Dumitriu ◽  
Daniela Pamfil ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Food Packaging ◽  
Polymeric Materials ◽  
Poly Lactic Acid ◽  
Rosemary Extract ◽  
Antioxidant Compounds ◽  
Innovative Drug ◽  
Melt Mixing

The purpose of the present study is to develop new multifunctional environmentally friendly materials having applications both in medical and food packaging fields. New poly(lactic acid) (PLA)-based multifunctional materials containing additives derived from natural resources like chitosan (CS) and rosemary extract (R) were obtained by melt mixing. Each of the selected components has its own specific properties such as: PLA is a biodegradable thermoplastic aliphatic polyester derived from renewable biomass, heat-resistant, with mechanical properties close to those of polystyrene and polyethylene terephthalate, and CS offers good antimicrobial activity and biological functions, while R significantly improves antioxidative action necessary in all applications. A synergy of their combination, an optimum choice of their ratio, and processing parameters led to high performance antimicrobial/antioxidant/biocompatible/environmentally degradable materials. The polyethylene glycol (PEG)-plasticized PLA/chitosan/powdered rosemary extract biocomposites of various compositions were characterized in respect to their mechanical and rheological properties, structure by spectroscopy, antioxidant and antimicrobial activities, and in vitro and in vivo biocompatibility. Scanning electron microscopy images evidence the morphology features added by rosemary powder presence in polymeric materials. Incorporation of additives improved elongation at break, antibacterial and antioxidant activity and also biocompatibility. Migration of bioactive components into D1 simulant is slower for PEG-plasticized PLA containing 6 wt % chitosan and 0.5 wt % rosemary extract (PLA/PEG/6CS/0.5 R) biocomposite and it occurred by a diffusion-controlled mechanism. The biocomposites show high hydrophilicity and good in vitro and in vivo biocompatibility. No hematological, biochemical and immunological modifications are induced by subcutaneous implantation of biocomposites. All characteristics of the PEG-plasticized PLA-based biocomposites recommend them as valuable materials for biomedical implants, and as well as for the design of innovative drug delivery systems. Also, the developed biocomposites could be a potential nature-derived active packaging with controlled release of antimicrobial/antioxidant compounds.

scholarly journals In vitro and in vivo properties study of a novel 3D-printed absorbable pancreaticojejunostomy device made by melting blended poly(p-dioxanone)/poly(lactic acid)

2021 ◽  
Vol 210 ◽  
pp. 110088
Author(s):  
Maoen Pan ◽  
Zeya Xu ◽  
Wei Luo ◽  
Yuanyuan Yang ◽  
Tianhong Teng ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Poly Lactic Acid ◽  
3D Printed

scholarly journals The Preparation of a Novel Poly(Lactic Acid)-Based Sustained H2S Releasing Microsphere for Rheumatoid Arthritis Alleviation

Pharmaceutics ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 742
Author(s):  
Yue Yu ◽  
Zhou Wang ◽  
Qian Ding ◽  
Xiangbin Yu ◽  
Qinyan Yang ◽  
...  
Keyword(s):  
Rheumatoid Arthritis ◽  
Lactic Acid ◽  
Encapsulation Efficiency ◽  
Poly Lactic Acid ◽  
Loss Of Function ◽  
Prolonged Administration ◽  
Administration Interval ◽  
Inflammatory Autoimmune Disease

Rheumatoid arthritis (RA) is a chronic, inflammatory autoimmune disease that mainly erodes joints and surrounding tissues, and if it is not treated in time, it can cause joint deformities and loss of function. S-propargyl-cysteine (SPRC) is an excellent endogenous hydrogen sulfide donor which can relieve the symptoms of RA through the promotion of H2S release via the CSE/H2S pathway in vivo. However, the instant release of H2S in vivo could potentially limit its further clinical use. To solve this problem, in this study, a SPRC-loaded poly(lactic acid) (PLA) microsphere (SPRC@PLA) was prepared, which could release SPRC in vitro in a sustained manner, and further promote sustained in vivo H2S release. Furthermore, its therapeutical effect on RA in rats was also studied. A spherical-like SPRC@PLA was successfully prepared with a diameter of approximately 31.61 μm, yielding rate of 50.66%, loading efficiency of 6.10% and encapsulation efficiency of 52.71%. The SPRC@PLA showed significant prolonged in vitro SPRC release, to 4 days, and additionally, an in vivo H2S release around 3 days could also be observed. In addition, a better therapeutical effect and prolonged administration interval toward RA rats was also observed in the SPRC@PLA group.

scholarly journals In Vitro Characterization of Poly(Lactic Acid)/ Poly(Hydroxybutyrate)/ Thermoplastic Starch Blends for Tissue Engineering Application

2021 ◽  
Vol 30 ◽  
pp. 096368972110210
Author(s):  
Martina Culenova ◽  
Ivana Birova ◽  
Pavol Alexy ◽  
Paulina Galfyova ◽  
Andreas Nicodemou ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Lactic Acid ◽  
Thermoplastic Starch ◽  
Biological Behavior ◽  
Poly Lactic Acid ◽  
Cytotoxicity Test ◽  
In Vitro Characterization ◽  
Custom Made

Complex in vitro characterization of a blended material based on Poly(Lactic Acid), Poly(Hydroxybutyrate), and Thermoplastic Starch (PLA/PHB/TPS) was performed in order to evaluate its potential for application in the field of tissue engineering. We focused on the biological behavior of the material as well as its mechanical and morphological properties. We also focused on the potential of the blend to be processed by the 3D printer which would allow the fabrication of the custom-made scaffold. Several blends recipes were prepared and characterized. This material was then studied in the context of scaffold fabrication. Scaffold porosity, wettability, and cell-scaffold interaction were evaluated as well. MTT test and the direct contact cytotoxicity test were applied in order to evaluate the toxic potential of the blended material. Biocompatibility studies were performed on the human chondrocytes. According to our results, we assume that material had no toxic effect on the cell culture and therefore could be considered as biocompatible. Moreover, PLA/PHB/TPS blend is applicable for 3D printing. Printed scaffolds had highly porous morphology and were able to absorb water as well. In addition, cells could adhere and proliferate on the scaffold surface. We conclude that this blend has potential for scaffold engineering.

Sign in / Sign up

Export Citation Format

Share Document