scholarly journals Comparative Performance Analysis of Grid-Connected PV Power Systems with Different PV Technologies in the Hot Summer and Cold Winter Zone

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Chong Li
Keyword(s):  
Thin Film ◽  
Power Systems ◽  
Ambient Temperature ◽  
Performance Ratio ◽  
Solar Irradiation ◽  
Energy Output ◽  
Cold Winter ◽  
Pv Systems ◽  
Monthly Average ◽  
Pv Module

The objective of this paper is to establish the performance of 8 kWp grid-connected photovoltaic (PV) power systems based on different PV module technologies in Nanjing, China. Nanjing has a hot summer and a cold winter which are considered based on monthly average solar irradiation and ambient temperature specifically for the deployment of grid-connected PV systems. The study focuses on performance assessment of grid-connected PV systems using typical PV modules made of monocrystalline silicon (m-Si), polycrystalline silicon (p-Si), edge-defined film-fed growth silicon (EFG-Si), cadmium telluride (CdTe) thin film, copper indium selenide (CIS) thin film, heterojunction with intrinsic thin layer (HIT), and hydrogenated amorphous silicon single-junction (a-Si:H single-PV) installed on location. The yearly average energy output, PV module and system efficiency, array yield, final yield, reference yield, performance ratio, monthly average array capture losses, and system losses of seven PV module technologies are all analyzed. The results show that grid-connected PV power system performance depends on geographical location, PV module types, and climate conditions such as solar radiation and ambient temperature. In addition, based on energy output and efficiency, the HIT PV power technology can be considered as the best option and CdTe and p-Si as the least suitable options for this area. The monthly average performance ratio of the CdTe technology was higher than those of other technologies over the monitoring period in Nanjing.

scholarly journals A Critical Appraisal of PV-Systems’ Performance

Buildings ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 192
Author(s):  
Zainab Usman ◽  
Joseph Tah ◽  
Henry Abanda ◽  
Charles Nche
Keyword(s):  
Renewable Energy ◽  
Electric Energy ◽  
Geographical Location ◽  
Poor Performance ◽  
Performance Ratio ◽  
Energy Output ◽  
Pv System ◽  
Pv Systems ◽  
Energy Technologies ◽  
And Performance

Climate change and global warming have triggered a global increase in the use of renewable energy for various purposes. In recent years, the photovoltaic (PV)-system has become one of the most popular renewable energy technologies that captures solar energy for different applications. Despite its popularity, its adoption is still facing enormous challenges, especially in developing countries. Experience from research and practice has revealed that installed PV-systems significantly underperform. This has been one of the major barriers to PV-system adoption, yet it has received very little attention. The poor performance of installed PV-systems means they do not generate the required electric energy output they have been designed to produce. Performance assessment parameters such as performance yields and performance ratio (PR) help to provide mathematical accounts of the expected energy output of PV-systems. Many reasons have been advanced for the disparity in the performance of PV-systems. This study aims to analyze the factors that affect the performance of installed PV-systems, such as geographical location, solar irradiance, dust, and shading. Other factors such as multiplicity of PV-system components in the market and the complexity of the permutations of these components, their types, efficiencies, and their different performance indicators are poorly understood, thus making it difficult to optimize the efficiency of the system as a whole. Furthermore, mathematical computations are presented to prove that the different design methods often used for the design of PV-systems lead to results with significant differences due to different assumptions often made early on. The methods for the design of PV-systems are critically appraised. There is a paucity of literature about the different methods of designing PV-systems, their disparities, and the outcomes of each method. The rationale behind this review is to analyze the variations in designs and offer far-reaching recommendations for future studies so that researchers can come up with more standardized design approaches.

Performance Analysis of PV Systems: Case study of Palestine Technical University (PTUK) PV Plant

2021 ◽  
Vol 9 (1) ◽  
pp. 10-21
Author(s):  
Mahmoud Ismail
Keyword(s):  
Performance Analysis ◽  
Energy Production ◽  
The Other ◽  
Performance Ratio ◽  
Solar Irradiation ◽  
Pv System ◽  
Pv Systems ◽  
Science Building ◽  
University Buildings

Performance ratio is one of the indicators used to describe the effectiveness of the PV systems. The sustainability of the PV system year after year as well as its reliability can be checked by measuring the performance ratio each year. This indicator will also enable us to carry out a comparison between the performances of different PV systems. In this paper, the performance ratios for five PV systems installed on the roof tops of some of PTUK university buildings have been calculated on monthly and yearly basis. The analysis has been carried out using the available data (energy production and solar irradiation) for the year 2019. It was found that the performance ratio has higher values for May and September in comparison with other months. On the other hand, its lowest values were obtained in winter months. This trend can be observed for all of the PV clusters on the five buildings.  When taking into account the overall system, the highest value for the performance ratio was 0.89, which was for September, whereas its lowest value of 0.70 was obtained in January. The performance ratio, which was calculated on yearly basis for the overall system, was found to be 0.80. When considering each building separately, the lowest value was 0.44 for the “Services” building whereas the highest value was 0.94 for the Science building.

scholarly journals Preliminary Evaluation of a Rooftop Grid-Connected Photovoltaic System Installation under the Climatic Conditions of Texas (USA)

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 586
Author(s):  
Fadhil Y. Al-Aboosi ◽  
Abdullah F. Al-Aboosi
Keyword(s):  
Power Plants ◽  
Negative Impact ◽  
Photovoltaic System ◽  
Performance Ratio ◽  
Energy Output ◽  
Preliminary Evaluation ◽  
Solar Pv ◽  
Energy Potential ◽  
Pv System ◽  
Pv Systems

Solar photovoltaic (PV) systems have demonstrated growing competitiveness as a viable alternative to fossil fuel-based power plants to mitigate the negative impact of fossil energy sources on the environment. Notwithstanding, solar PV technology has not made yet a meaningful contribution in most countries globally. This study aims to encourage the adoption of solar PV systems on rooftop buildings in countries which have a good solar energy potential, and even if they are oil or gas producers, based on the obtained results of a proposed PV system. The performance of a rooftop grid-tied 3360 kWp PV system was analyzed by considering technical, economic, and environmental criteria, solar irradiance intensity, two modes of single-axis tracking, shadow effect, PV cell temperature impact on system efficiency, and Texas A&M University as a case study. The evaluated parameters of the proposed system include energy output, array yield, final yield, array and system losses, capacity factor, performance ratio, return on investment, payback period, Levelized cost of energy, and carbon emission. According to the overall performance results of the proposed PV system, it is found to be a technically, economically, and environmentally feasible solution for electricity generation and would play a significant role in the future energy mix of Texas.

scholarly journals Characterization Performance of Monocrystalline Silicon Photovoltaic Module Using Experimentally Measured Data

2019 ◽  
Vol 25 (10) ◽  
pp. 1-19
Author(s):  
Mena Safaa Mohammed ◽  
Emad Talib Hashim
Keyword(s):  
Ambient Temperature ◽  
Solar Irradiance ◽  
Clean Energy ◽  
Monocrystalline Silicon ◽  
Solar Irradiation ◽  
Weather Data ◽  
Photovoltaic Module ◽  
Solar Pv ◽  
Solar Module ◽  
Pv Module

Solar photovoltaic (PV) system has emerged as one of the most promising technology to generate clean energy. In this work, the performance of monocrystalline silicon photovoltaic module is studied through observing the effect of necessary parameters: solar irradiation and ambient temperature. The single diode model with series resistors is selected to find the characterization of current-voltage (I-V) and power-voltage (P-V) curves by determining the values of five parameters ( ). This model shows a high accuracy in modeling the solar PV module under various weather conditions. The modeling is simulated via using MATLAB/Simulink software. The performance of the selected solar PV module is tested experimentally for different weather data (solar irradiance and ambient temperature) that is gathered from October 2017 to April 2018 in the city of Baghdad. The collected data is recorded for the entire months during the time which is limited between 8:00 AM and 1:00 PM. This work demonstrates that the change in a cell temperature is directly proportional with the PV module current, while it is inversely proportional with the PV module voltage. Additionally, the output power of a PV module increases with decreasing the solar module temperature. Furthermore, the Simulink block diagram is used to evaluate the influence of weather factors on the PV module temperature by connecting to the MATLAB code. The best value from the results of this work was in March when the solar irradiance was equal to 1000 W/m2 and the results were: Isc,exp=3.015, Isc,mod=3.25 , RE=7.79 and Voc,exp=19.67 ,Voc,mod=19.9 ,RE=1.1

scholarly journals Fýsileiki virkjunar sólarorku á norðurslóðum: Reynsla af sólarpanelum IKEA á Íslandi

2019 ◽  
Vol 25 ◽  
pp. 1-19
Author(s):  
Sindri Þrastarson ◽  
Björn Marteinsson ◽  
Hrund Ólöf Andradóttir
Keyword(s):  
Energy Production ◽  
Production Capacity ◽  
Production Costs ◽  
Performance Ratio ◽  
Solar Irradiation ◽  
Specific Yield ◽  
Solar Pv ◽  
Solar Panels ◽  
Pv System ◽  
Pv Systems

The efficiency and production costs of solar panels have improved dramatically in the past decades. The Nordic countries have taken steps in instigating photovoltaic (PV) systems into energy production despite limited incoming solar radiation in winter. IKEA installed the first major PV system in Iceland with 65 solar panels with 17.55 kW of production capacity in the summer of 2018. The purpose of this research was to assess the feasibility of PV systems in Reykjavík based on solar irradiation measurements, energy production of a PV array located at IKEA and theory. Results suggests that net irradiation in Reykjavík (64°N, 21° V) was on average about 780 kWh/m2 per year (based on years 2008-2018), highest 140 kWh/m2 in July and lowest 1,8 kWh/m2 in December. Maximum annual solar power is generated by solar panels installed at a 40° fixed angle. PV panels at a lower angle produce more energy during summer. Conversely, higher angles maximize production in the winter. The PV system produced over 12 MWh over a one-year period and annual specific yield was 712 kWh/kW and performance ratio 69% which is about 10% lower than in similar studies in cold climates. That difference can be explained by snow cover, shadow falling on the panels and panels not being fixed at optimal slope. Payback time for the IKEA PV system was calculated 24 years which considers low electricity prices in Reykjavik and unforeseen high installation costs. Solar energy could be a feasible option in the future if production- and installation costs were to decrease and if the solar PV output could be sold to the electric grid in Iceland.

scholarly journals Comparative Analysis of Ground-Mounted vs. Rooftop Photovoltaic Systems Optimized for Interrow Distance between Parallel Arrays

Energies ◽  
2020 ◽  
Vol 13 (14) ◽  
pp. 3639
Author(s):  
Ahmed Bilal Awan ◽  
Mohammed Alghassab ◽  
Muhammad Zubair ◽  
Abdul Rauf Bhatti ◽  
Muhammad Uzair ◽  
...  
Keyword(s):  
Performance Comparison ◽  
Performance Ratio ◽  
Energy Output ◽  
Energy Yield ◽  
Pv System ◽  
Utilization Factor ◽  
Pv Systems ◽  
Pv Modules ◽  
Mutual Shading ◽  
Land Cost

The aim of this research is to perform an in-depth performance comparison of ground-mounted and rooftop photovoltaic (PV) systems. The PV modules are tilted to receive maximum solar irradiance. The efficiency of the PV system decreases due to the mutual shading impact of parallel tilted PV modules. The mutual shading decreases with the increasing interrow distance of parallel PV modules, but a distance that is too large causes an increase in land cost in the case of ground-mounted configuration and a decrease in roof surface shading in the case of rooftop configuration, because larger sections of roof are exposed to sun radiation. Therefore, an optimized interrow distance for the two PV configurations is determined with the aim being to minimize the levelized cost of energy (LCoE) and maximize the energy yield. The model of the building is simulated in EnergyPlus software to determine the cooling load requirement and roof surface temperatures under different shading scenarios. The layout of the rooftop PV system is designed in Helioscope software. A detailed comparison of the two systems is carried out based on energy output, performance ratio, capacity utilization factor (CUF), energy yield, and LCoE. Compared to ground-mounted configuration, the rooftop PV configuration results in a 2.9% increase in CUF, and up to a 23.7% decrease in LCoE. The results of this research show that installing a PV system on a roof has many distinct advantages over ground-mounted PV systems such as the shading of the roof, which leads to the curtailment of the cooling energy requirements of the buildings in hot regions and land cost savings, especially for urban environments.

scholarly journals A Virtual PV Systems Lab for Engineering Undergraduate Curriculum

2014 ◽  
Vol 2014 ◽  
pp. 1-17 ◽  
Author(s):  
Emre Ozkop ◽  
Ismail H. Altas
Keyword(s):  
Power Systems ◽  
Undergraduate Curriculum ◽  
Photovoltaic System ◽  
Solar Irradiation ◽  
Photovoltaic Systems ◽  
Loading Conditions ◽  
Operating Characteristics ◽  
Pv Systems ◽  
Virtual Lab ◽  
Temperature Levels

Design and utilization of a Virtual Photovoltaic Systems Laboratory for undergraduate curriculum are introduced in this paper. The laboratory introduced in this study is developed to teach students the basics and design steps of photovoltaic solar energy systems in a virtual environment before entering the field. The users of the proposed virtual lab will be able to determine the sizing by selecting related parameters of the photovoltaic system to meet DC and AC loading conditions. Besides, the user will be able to analyze the effect of changing solar irradiation and temperature levels on the operating characteristics of the photovoltaic systems. Common DC bus concept and AC loading conditions are also included in the system by utilizing a permanent magnet DC motor and an RLC load as DC and AC loading examples, respectively. The proposed Virtual Photovoltaic Systems Laboratory is developed in Matlab/Simulink GUI environment. The proposed virtual lab has been used in Power Systems Lab in the Department of Electrical and Electronics Engineering at Karadeniz Technical University as a part of undergraduate curriculum. A survey on the students who took the lab has been carried out and responses are included in this paper.

scholarly journals Performance Analysis of PV Systems: Case study of Palestine Technical University (PTUK) PV Plant

2021 ◽  
Vol 9 (1) ◽  
pp. 10-21
Author(s):  
Mahmoud Ismail
Keyword(s):  
Performance Analysis ◽  
Energy Production ◽  
The Other ◽  
Performance Ratio ◽  
Solar Irradiation ◽  
Pv System ◽  
Pv Systems ◽  
Science Building ◽  
University Buildings

Performance ratio is one of the indicators used to describe the effectiveness of the PV systems. The sustainability of the PV system year after year as well as its reliability can be checked by measuring the performance ratio each year. This indicator will also enable us to carry out a comparison between the performances of different PV systems. In this paper, the performance ratios for five PV systems installed on the roof tops of some of PTUK university buildings have been calculated on monthly and yearly basis. The analysis has been carried out using the available data (energy production and solar irradiation) for the year 2019. It was found that the performance ratio has higher values for May and September in comparison with other months. On the other hand, its lowest values were obtained in winter months. This trend can be observed for all of the PV clusters on the five buildings.  When taking into account the overall system, the highest value for the performance ratio was 0.89, which was for September, whereas its lowest value of 0.70 was obtained in January. The performance ratio, which was calculated on yearly basis for the overall system, was found to be 0.80. When considering each building separately, the lowest value was 0.44 for the “Services” building whereas the highest value was 0.94 for the Science building.

scholarly journals Design of Grid-connected and Stand-alone Photovoltaic Systems for Residential Energy Usage: A Technical Analysis

2021 ◽  
pp. 34-50
Author(s):  
Kehinde Adeleye Makinde ◽  
Oludamilare Bode Adewuyi ◽  
Abraham Olatide Amole ◽  
Oyetunde Adeoye Adeaga
Keyword(s):  
Performance Ratio ◽  
Energy Output ◽  
Residential Energy ◽  
Pv System ◽  
Free Standing ◽  
Pv Systems ◽  
Battery Capacity ◽  
Grid Design ◽  
Development Goals ◽  
Battery Discharge

Towards realizing the United Nations sustainable development goals, access to clean, cheap and reliable energy, especially electricity, has been considered as one of the vital indices in any community. Hence, this paper presents the design analysis of both a grid-connected and an offgrid photovoltaic (PV) systems for household users in the highly residential city of Ogbomoso in Nigeria using PVGIS software. For the off-grid design, it is estimated that, given a total daily load of 9.57 kWh, a 3.5 kWp PV array size and a battery capacity of 86 kWh are enough to power the load  with 5 days of autonomy and 70% depth of battery discharge. For the grid-connected PV system, the annual energy output for a building-integrated PV system is found to be around 4006 kWh; and a total of eight PV modules (each rated 250 Wp, 30.93 V) are stringed to arrive at the desired capacity of 2 kWp. In terms of performance, the performance ratio (PR) of a building integrated grid-tied PV system at the study location was found to be 71.2% while for a free-standing PV system, the PR was 75%.

scholarly journals State-Space Model of Quasi-Z-Source Inverter-PV Systems for Transient Dynamics Studies and Network Stability Assessment

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4150
Author(s):  
Lluís Monjo ◽  
Luis Sainz ◽  
Juan José Mesas ◽  
Joaquín Pedra
Keyword(s):  
Power Systems ◽  
State Space ◽  
State Space Model ◽  
Pv System ◽  
Pv Systems ◽  
Renewable Power ◽  
Ac Networks ◽  
Transient Interactions ◽  
The Stability ◽  
Averaged Model

Photovoltaic (PV) power systems are increasingly being used as renewable power generation sources. Quasi-Z-source inverters (qZSI) are a recent, high-potential technology that can be used to integrate PV power systems into AC networks. Simultaneously, concerns regarding the stability of PV power systems are increasing. Converters reduce the damping of grid-connected converter systems, leading to instability. Several studies have analyzed the stability and dynamics of qZSI, although the characterization of qZSI-PV system dynamics in order to study transient interactions and stability has not yet been properly completed. This paper contributes a small-signal, state-space-averaged model of qZSI-PV systems in order to study these issues. The model is also applied to investigate the stability of PV power systems by analyzing the influence of system parameters. Moreover, solutions to mitigate the instabilities are proposed and the stability is verified using PSCAD time domain simulations.

Sign in / Sign up

Export Citation Format

Share Document