scholarly journals Optimization of LaPO4:Bi3+ Single-Phased White-Emitting Phosphor Luminescence Properties by Li+/Na+ Doping

2019 ◽  
Vol 2019 ◽  
pp. 1-6 ◽  
Author(s):  
Taoli Deng ◽  
Qiuyun Zhang
Keyword(s):  
White Light ◽  
Host Lattice ◽  
X Ray Diffraction ◽  
Solid State Reaction Technique ◽  
Conventional Solid State Reaction ◽  
Light Emitting ◽  
Chromaticity Coordinate ◽  
Na Doping ◽  
Single Host ◽  
Cie Chromaticity

LaPO4:Bi3+ single-phased white-emitting phosphors doped with both Li+/Na+ ions were successfully prepared by a conventional solid-state reaction technique. Microstructures were analyzed by both X-ray diffraction and high-resolution scanning electron microscopy experiments. Under the excitation of 335 nm, the La0.97PO4:Bi3+0.03 phosphor showed four emission bands with maxima at 460 nm, 487 nm (blue), 530 nm (yellow), and 637 nm (red); these can be successfully combined to form pure white light in a single host lattice only by simple activator Bi3+ ion. It was found that changing the concentration of dopant (Li+, Na+ ions) did not produce a change in shape or location of the emission peaks, but the value of the emission intensity increased; this was particularly evident in the red emission, which could optimize the white light emitting performance of the phosphors. When the Na+ doping concentration was 0.02, the CIE chromaticity coordinate of phosphor La0.95PO4:Bi3+0.03, Na+0.02 was (0.3008, 0.3203), close to that of the standard white light.

Luminescence Properties of Rare-Earth Co-Doped Phosphate Glasses for White Light Emitting Diodes

2014 ◽  
Vol 989-994 ◽  
pp. 369-372
Author(s):  
Guo Hua Chen ◽  
Xiao Ling Kang ◽  
Yun Yang
Keyword(s):  
White Light ◽  
Light Emitting Diodes ◽  
Phosphate Glasses ◽  
Light Illumination ◽  
Light Emitting ◽  
Chromaticity Coordinate ◽  
Quenching Method ◽  
Cie Chromaticity ◽  
White Light Emitting Diodes ◽  
Co Doped

Ce3+/Tb3+/Sm3+ co-doped phosphate glasses were prepared by melt quenching method. The full colors including blue, green and reddish orange emitting were observed simultaneously in the photoluminescent spectra of the glasses at 377 nm excitation, and the combination of these three emitting allows the realization of white light emitting. The CIE chromaticity coordinate (x=0.339, y=0.331) of the emission from the glass is close to the standard white-light illumination (0.333, 0.333). Moreover, the tunable luminescent color and chromaticity parameters could be realized by varying the content of Tb4O7 dopant in the glass composition, which is promising fluorescent materials for white light emitting diodes applications.

The Morphologies and Photoluminescence of Ce3+-Doped 0.5La2O3-2SrO-0.5Al2O3 Phosphors with SrF2

2016 ◽  
Vol 680 ◽  
pp. 228-232
Author(s):  
Xi Guang Gu ◽  
Ren Li Fu ◽  
Ye Tang ◽  
Fang Yang
Keyword(s):  
Solid State ◽  
White Light ◽  
Solid State Reaction ◽  
Emission Intensity ◽  
Solid State Reaction Method ◽  
Conventional Solid State Reaction ◽  
Light Emitting ◽  
Reaction Method ◽  
Reducing Atmosphere ◽  
White Light Emitting Diodes

Ce3+-doped 0.5La2O3-2SrO-0.5Al2O3 (LSA:Ce) phosphors had been successfully synthesized using a conventional solid-state reaction method under reducing atmosphere (H2/N2 =1/5). The phase, morphologies and luminescence properties of the LSA:Ce phosphors were investigated. The emission intensity of LSA:Ce phosphors was improved by the addition of SrF2 as flux, and red shift of PL spectra peak was observed in this phosphors. Research results shown that the LSA:Ce phosphors have the potential to meet the development of white light-emitting diodes.

scholarly journals Effects of Bi3+ Ion-Doped on the Microstructure and Photoluminescence of La0.97Pr0.03VO4 Phosphor

2021 ◽  
Vol 6 (3) ◽  
pp. 191-198
Author(s):  
Hao-Long Chen ◽  
Hung-Rung Shih ◽  
Sean Wu ◽  
Yee-Shin Chang
Keyword(s):  
White Light ◽  
Emission Intensity ◽  
Sol Gel ◽  
Blue Shift ◽  
Light Emitting ◽  
Light Region ◽  
Chromaticity Coordinates ◽  
Ion Doping ◽  
Ion Contents ◽  
Cie Chromaticity

The objective of this paper is to enhance the emission intensity of La0.97Pr0.03VO4 single-phased white light emitting phosphor. The Bi3+ ion-doped La0.97Pr0.03VO4 single-phased white light emitting phosphors are synthesized using a sol-gel method. The structure and photoluminescence properties of (La0.97-yBiy)Pr0.03VO4 (y = 0-0.05) phosphor are also examined. The XRD results show that the structure of La0.97Pr0.03VO4 phosphors with different concentrations of Bi3+ ion doping keeps the monoclinic structure. The SEM results show that the phosphor particles become smoother when the Bi3+ ion is doped. The excitation band for La0.97Pr0.03VO4 phosphor exhibits a blue shift from 320 nm to 308 nm as the Bi3+ ion contents are increased. The maximum emission intensity is achieved for a Bi3+ ion content of 0.5 mol%, which is about 30% greater than that with no Bi3+ ion doped. The CIE chromaticity coordinates are all located in the near white light region for different Bi3+ ion-doped La0.97Pr0.03VO4 phosphors.

Photoluminescence studies on LiNa5(PO4)2:Dy3+, Sm3+ phosphor

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Miyapuram Ravi ◽  
Ghanta Pushpa Chakrapani ◽  
Mandava Balachandrika ◽  
Pavuluri Vasudevarao ◽  
Chendela Nageswararao ◽  
...  
Keyword(s):  
White Light ◽  
X Ray Diffraction ◽  
Light Emitting ◽  
New Class ◽  
Light Region ◽  
Crystalline Nature ◽  
Photoluminescence Studies ◽  
White Light Emitting Diodes ◽  
Good Agreement ◽  
Pure White

Abstract This paper describes the preparation, structure and photoluminescence properties of a new class LiNa5(PO4)2:Dy3+, Sm3+-phosphor. Crystalline nature confirmed by X-ray diffraction. The phases obtained are in good agreement with the standard phase. Excitation dependence and concentration effect on luminescence features are investigated. Color purity and optical bandgap are also estimated for the LiNa5(PO4)2:Dy3+, Sm3+ phosphors. The result shows LiNa5(PO4)2:Dy3+, Sm3+-phosphor excited by 374 nm nUV light produces pure white light than others. Admixing of 4f configurations and energy transfer between dopants are identified while varying the concentration of Sm3+. The CIE coordinates for LiNa5(PO4)2:0.05Dy3+, 0.05Sm3+ (x = 0.309, y = 0.332) are positioned well in white light region and very close to pure white light. The present study on LiNa5(PO4)2:Dy3+, Sm3+-phosphor suggests that it is useful for the fabrication of white light emitting diodes.

A new langbeinite-type phosphate K2GdHf(PO4)3: synthesis, crystal structure, band structure and luminescence properties

2020 ◽  
Vol 76 (8) ◽  
pp. 771-778
Author(s):  
Hua Nan ◽  
Li Chen ◽  
Rui-Juan Zhang ◽  
Dan Zhao
Keyword(s):  
Optical Transition ◽  
Blue Emission ◽  
Large Family ◽  
Luminescence Properties ◽  
X Ray Diffraction ◽  
Blue Emission Band ◽  
Light Emitting ◽  
Direct Band ◽  
Cie Chromaticity ◽  
White Light Emitting Diodes

Langbeinite-type compounds are a large family that include phosphates, sulfates and arsenates, and which are accompanied by interesting physical properties. This work reports a new disordered langbeinite-type compound, K2GdHf(PO4)3 [dipotassium gadolinium hafnium tris(phosphate)], and its structure as determined by single-crystal X-ray diffraction. Theoretical studies reveal that K2GdHf(PO4)3 is an insulator with a direct band gap of 4.600 eV and that the optical transition originates from the O-2p→Hf-5d transition. A Ce3+-doped phosphor, K2Gd0.99Ce0.01Hf(PO4)3, was prepared and its luminescence properties studied. With 324 nm light excitation, a blue emission band was observed due to the 5d 1→4f 1 transition of Ce3+. The average luminescence lifetime was calculated to be 5.437 µs and the CIE chromaticity coordinates were (0.162, 0.035). One may expect that K2Gd0.99Ce0.01Hf(PO4)3 can be used as a good blue phosphor for three-colour white-light-emitting diodes (WLEDs).

Synthesis and luminescence properties of the red phosphor CaZrO3:Eu3+ for white light-emitting diode application

Open Physics ◽  
2011 ◽  
Vol 9 (4) ◽  
Author(s):  
Junli Huang ◽  
Liya Zhou ◽  
Yuwei Lan ◽  
Fuzhong Gong ◽  
Qunliang Li ◽  
...  
Keyword(s):  
White Light ◽  
Light Emitting Diode ◽  
Red Light ◽  
Average Diameter ◽  
Xrd Analysis ◽  
X Ray Diffraction ◽  
Solid State Method ◽  
Light Emitting ◽  
Near Ultraviolet ◽  
Light Region

AbstractEu3+-doped CaZrO3 phosphor with perovskite-type structure was synthesized by the high temperature solid-state method. The samples were characterized by X-ray diffraction, scanning electron microscopy, fluorescence spectrophotometer and UV-vis spectrophotometer, respectively. XRD analysis showed that the formation of CaZrO3 was at the calcinations temperature of 1400°C. The average diameter of CaZrO3 with 4 mol% doped-Eu3+ was 2µm. The PL spectra demonstrated that CaZrO3:Eu3+ phosphor could be excited effectively in the near ultraviolet light region (397 nm) and emitted strong red-emission lines at 616 nm corresponding to the forced electric dipole 5 D 0 → 7 F 2 transitions of Eu3+. Meanwhile, the light-emitting diode was fabricated with the Ca0.96ZrO3:Eu0.043+ phosphor, which can efficiently absorb ∼ 400 nm irradiation and emit red light. Therefore Ca0.96ZrO3:Eu0.043+ may have applications for a near ultraviolet InGaN chip-based white light-emitting diode.

Perovskite white light-emitting diodes with a perovskite emissive layer blended with rhodamine 6G

2020 ◽  
Vol 8 (37) ◽  
pp. 12951-12958 ◽  
Author(s):  
Che-Yu Chang ◽  
Wei-Li Hong ◽  
Pei-Hsuan Lo ◽  
Tzu-Hsiang Wen ◽  
Sheng-Fu Horng ◽  
...  
Keyword(s):  
White Light ◽  
Light Emitting Diodes ◽  
Rhodamine 6G ◽  
Light Emitting ◽  
Emissive Layer ◽  
Chromaticity Coordinates ◽  
Halide Perovskites ◽  
Cie Chromaticity ◽  
White Light Emitting Diodes

Perovskite white light-emitting diodes with only a single emissive layer of halide perovskites and rhodamine 6G were realized with the CIE chromaticity coordinates of (0.33, 0.40).

scholarly journals Preparation of Bismuth Oxide Photocatalyst and Its Application in White-light LEDs

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Yen-Chang Chu ◽  
Gang-Juan Lee ◽  
Chin-Yi Chen ◽  
Shih-Hsin Ma ◽  
Jerry J. Wu ◽  
...  
Keyword(s):  
Bismuth Oxide ◽  
White Light ◽  
Front Surface ◽  
Color Temperature ◽  
Spray Pyrolysis Method ◽  
Light Emitting ◽  
White Leds ◽  
Air Purifier ◽  
Cie Chromaticity ◽  
White Light Emitting Diodes

Bismuth oxide photocatalysts were synthesized and coated on the front surface of phosphor-converted white light-emitting diodes to produce a safe and environmentally benign lighting source. Bismuth oxide photocatalyst powders were synthesized with a spray pyrolysis method at 500°C, 600°C, 700°C, and 800°C. Using the absorption spectrum in the blue and UV regions of the bismuth oxide photocatalysts, the blue light and UV leakage problems of phosphor-converted white LEDs can be significantly reduced. The experimental results showed that bismuth oxide photocatalyst synthesized at 700°C exhibited the most superior spectrum inhibiting ability. The suppressed ratio reached 52.33% in the blue and UV regions from 360 to 420 nm. Related colorimetric parameters and the photocatalyst decomposition ability of fabricated white-light LEDs were tested. The CIE chromaticity coordinates(x,y)were (0.349, 0.393), and the correlated color temperature was 4991 K. In addition, the coating layer of photocatalyst can act as an air purifier and diffuser to reduce glare. A value of66.2±0.60 ppmv of molecular formaldehyde gas can be decomposed in 120 mins.

Luminescence Properties and Synthesis of SrMgAl10O17:Mn4+ Red Phosphor for White Light-Emitting Diodes

2016 ◽  
Vol 16 (4) ◽  
pp. 3489-3493 ◽  
Author(s):  
Renping Cao ◽  
Hongdong Xue ◽  
Xiaoguang Yu ◽  
Fen Xiao ◽  
Donglan Wu ◽  
...  
Keyword(s):  
Red Light ◽  
Solid State Reaction Method ◽  
Luminescence Properties ◽  
Conventional Solid State Reaction ◽  
Light Emitting ◽  
White Leds ◽  
Structure Morphology ◽  
Optimal Doping Concentration ◽  
Cie Chromaticity ◽  
White Light Emitting Diodes

A series of Mn4+ doped SrMgAl10O17 phosphors are synthesized by a conventional solid-state reaction method in air, and their crystal structure, morphology, and fluorescence properties are investigated. The luminescence properties show clearly that SrMgAl10O17:Mn4+ phosphor can be excited by UV (200–380 nm), near UV (380–420 nm), and blue (420–480 nm) bands of LEDs chip, and emits red light in the range of 600 nm to 750 nm with satisfying CIE chromaticity coordinates (0.7207, 0.2793). The optimal doping concentration of Mn4+ ion is ∼1 mol%, and its lifetime is ∼1.15 ms. The possible luminous mechanism of Mn4+ ion is discussed by Tanabe-Sugano diagram. These experiment results indicate that Mn4+ doped SrMgAl10O17 phosphors can be a potential application as a red-emitting phosphor candidate in white LEDs.

Sign in / Sign up

Export Citation Format

Share Document