scholarly journals Rib Spalling 3D Model for Soft Coal Seam Faces with Large Mining Height in Protective Seam Mining: Theoretical and Numerical Analyses

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-17
Author(s):  
Shuai Liu ◽  
Ke Yang ◽  
Tong Zhang ◽  
Chunan Tang
Keyword(s):  
Coal Seam ◽  
Failure Process ◽  
3D Analysis ◽  
Coal Face ◽  
Soft Coal ◽  
Working Face ◽  
Protective Seam ◽  
Seam Mining ◽  
Protective Seam Mining ◽  
Cutting Height

Fully-mechanized mining of coal face with a large cutting height is generally jeopardized by rib spalling disaster in the working face. Preventive measures based on undisturbed coal seam conditions fail to provide safe predictions, as large-scale fractures in soft coal face frequently appear before excavation due to mining-induced stresses. This paper investigates a case study of the Paner Mine 11224 working face in the Huainan mine area, China, which features an overlying protected layer in the protective seam mining. To simulate the failure process in such a mine, we elaborated a simplified physical-mechanical model of a coal wall that underwent shear failure and sliding instability, in compliance with the triangular prism unit criterion. Similar simulation experiments, theoretical calculations, and borehole monitoring were used to comprehensively analyze the overburden fracture and movement after mining the lower protective seam. The development height of three overburden zones was determined, and the characteristics of the protected layer affected by mining were obtained. The results show that the failure is mainly related to the roof load, coal cohesion, internal friction angle, coal seam inclination, and sidewall protecting force. The key to limiting the frictional sliding of a slip body is to reduce the roof load and increase the sliding coefficient and cohesion of the main control weak surface (MCWS). Besides, a self-developed three-dimensional numerical calculation software RFPA3D (Realistic Fracture Process 3D Analysis), which considered the rock heterogeneity, was used to reproduce a weak triangular prism’s progressive failure process. The numerical simulation results agreed with the fracture pattern predicted by the theoretical model, which accurately described the rib spalling mechanisms in a soft coal face with a large cutting height and a protective layer.

scholarly journals Research on Control of Rib Spalling Disaster in the Three-Soft Coal Seam

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Feng Cui ◽  
Tinghui Zhang ◽  
Xiaoqiang Cheng
Keyword(s):  
Coal Seam ◽  
Field Experiments ◽  
Simulation Experiment ◽  
Current Status ◽  
Soft Coal ◽  
Grouting Pressure ◽  
Working Face ◽  
Coal Wall ◽  
Soft Coal Seam ◽  
Seam Mining

Rib spalling disaster at the coal mining faces severely restricted the safe and efficient output of coal resources. In order to solve this problem, based on the analysis of the current status of rib spalling in the three-soft coal seam 1508 Working Face of Heyang Coal Mine, a mechanical model of sliding-type rib spalling was established and the main influencing factors that affect rib spalling are given. The mechanism of grouting technology to prevent and control rib spalling has been theoretically analyzed. A similarity simulation experiment is used to analyze the change law of roof stress under the condition of three-soft coal seam mining. The optimal grouting pressure is determined by a numerical simulation experiment. And, silicate-modified polymer grouting reinforcement materials (SMPGMs) are used in field experiments. After twice grouting operations in the 1508 Working Face, the coal wall was changed from the original soft and extremely easy rib spalling to a straight coal wall and the amount of rib spalling has been reduced by 57.45% and 48.43, respectively. And, the mining height has increased by 0.16 m and 0.23 m, respectively. The experimental results show that the rib spalling disaster of the three-soft coal seam has been effectively controlled.

scholarly journals Reduction of Stress Acting on a Thick, Deep Coal Seam by Protective-Seam Mining

Energies ◽  
2017 ◽  
Vol 10 (8) ◽  
pp. 1209 ◽  
Author(s):  
Rui Gao ◽  
Bin Yu ◽  
Hongchun Xia ◽  
Hongfei Duan
Keyword(s):  
Coal Seam ◽  
Protective Seam ◽  
Seam Mining ◽  
Protective Seam Mining

scholarly journals Acoustic Emission Characteristics of Coal Samples under Different Stress Paths Corresponding to Different Mining Layouts

Energies ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 3295
Author(s):  
Yiming Yang ◽  
Ting Ai ◽  
Zetian Zhang ◽  
Ru Zhang ◽  
Li Ren ◽  
...  
Keyword(s):  
Crack Initiation ◽  
Deep Mining ◽  
Ae Energy ◽  
Working Face ◽  
Mining Conditions ◽  
Protective Seam ◽  
Order Of Magnitude ◽  
Three Stages ◽  
Seam Mining ◽  
Protective Seam Mining

Research on the mining-induced mechanical behavior and microcrack evolution of deep-mined coal has become increasingly important with the sharp increase in mining depth. For rock units in front of the working face, the microcrack evolution characteristics, structural characteristics, and stress state correspond well to mining layouts and depths under deep mining. The acoustic emission (AE) characteristics of typical coal under deep mining were obtained by conducting laboratory experiments to simulate mining-induced behavior and utilizing AE techniques to capture the variation in AE temporal and spatial parameters in real time, which provide an important basis for studying the rupture mechanisms and mechanical behavior of deep-mined coal. The findings were as follows: (1) AE activity under deep mining was characterized by three stages, corresponding to crack initiation, crack stable propagation, and crack unstable propagation. As the three stages proceeded, the AE counting rate and AE energy rate presented stronger clustering characteristics, and the cumulative AE counting and cumulative AE energy exhibited a sharp increase by an order of magnitude. (2) The crack initiation and the main stages of crack propagation were determined by characteristic points of variation curves in the AE parameters over time. In the main crack propagation stage, the number of cumulative AE events and the cumulative AE counts were similar among the three mining conditions, while coal samples under coal pillar mining released the largest amount of AE energy. The amount of accumulated AE energy released by coal samples increased by one order of magnitude according to the sequence of protective coal-seam mining, top-coal caving mining, and nonpillar mining. (3) Fractal technology was applied to quantitatively analyze the AE spatial evolution process, showing that the fractal dimension of the AE location decreased as the peak stress increased, corresponding to protective seam mining, caving-coal mining, and nonpillar mining. The above results showed that the deformation and fracture characteristics of coal under deep mining followed a general law, but were affected by different mining conditions. The crack initiation and main rupture activity of coal occurred earlier under the conditions of protective seam mining, top-coal caving mining, and nonpillar mining, successively. Moreover, nonpillar mining induced the strongest and highest degree of unstable rupture of the coal body in front of the working face.

scholarly journals Analysis of coal face stability of lower coal seam under repeated mining in close coal seams group

2022 ◽  
Vol 12 (1) ◽  
Author(s):  
Yu Xiong ◽  
Dezhong Kong ◽  
Zhijie Wen ◽  
Guiyi Wu ◽  
Qinzhi Liu
Keyword(s):  
Coal Seam ◽  
Shear Failure ◽  
Coal Seams ◽  
Coal Face ◽  
Soft Coal ◽  
Mechanics Model ◽  
Roof Structure ◽  
Working Face ◽  
Close Coal Seams ◽  
Similar Simulation

AbstractAiming at the problem of coal face failure of lower coal seam under the influence of repeated mining in close coal seams, with the working face 17,101 as a background, the coal samples mechanics test clarified the strength characteristics of the coal face under repeated mining, through similar simulation experiments, the development of stable roof structure and surrounding rock cracks under repeated mining of close coal seams are further explored. And based on this, establish a coal face failure mechanics model to comprehensively analyze the influence of multiple roof structural instabilities on the stability of the coal face. Finally, numerical simulation is used to further supplement and verify the completeness and rationality of similar simulation experiment and theoretical analysis results. The results show that: affected by repeated mining disturbances, the cracks in the coal face are relatively developed, the strength of the coal body is reduced, and the coal face is more prone to failure under the same roof pressure; During the mining of coal seam 17#, the roofs of different layers above the stope form two kinds of "arch" structures and one kind of “voussoir beam” structure, and there are three different degrees of frequent roof pressure phenomenon, which is easy to cause coal face failure; Under repeated mining of close coal seams, the roof pressure acting on the coal face is not large. The main controlling factor of coal face failure is the strength of the coal body, and the form of coal face failure is mostly the shear failure of soft coal. The research results can provide a theoretical basis for coal face failure under similar conditions.

Pressure Regularity Study of Three Soft Complex Coal Caving Coal Face

2011 ◽  
Vol 217-218 ◽  
pp. 1641-1646
Author(s):  
Nian Jie Ma ◽  
Guo Dong Zhao ◽  
Chun Lei Ju ◽  
Chong Li ◽  
Xiang Zhong Dong
Keyword(s):  
Coal Seam ◽  
Mine Pressure ◽  
Related Factors ◽  
Thick Coal Seam ◽  
Factors Affecting ◽  
Soft Coal ◽  
Working Face ◽  
Distribution Rule ◽  
Mining Coal ◽  
Seam Mining

In order to grasp the movement rules of three soft coal caving complex working plane strata and stoping space surrounding rock and hydraulic support interactions relationship, improve the management of mining roof, to do research about the distribution rule of caused abutment pressure and shield support of initial supporting force, the work resistance and adaptability of coal seam. The first coalface of testing mine 1301 mining coal gangue is clip three soft and thick coal seam mining, adopt fully mechanized caving technology, choose ZF6400/17/32 type support screen type top coal caving hydraulic to support working face roof support, in order to provide better services for safe production in the working face, especially study on related factors affecting the observational of working mine pressure.

scholarly journals A protective seam mining method by cutting roof with chainsaw arm machine

2020 ◽  
Author(s):  
Tiejun Kuang ◽  
Yang Tai ◽  
Bingjie Huo ◽  
Binwei Xia ◽  
Yanqun Zhang ◽  
...  
Keyword(s):  
Lower Layer ◽  
Mining Method ◽  
Coal Seams ◽  
Working Face ◽  
Protective Seam ◽  
Mining Pressure ◽  
Coal Pillars ◽  
Residual Coal ◽  
Seam Mining ◽  
Protective Seam Mining

Abstract Multiple-layered coal seams widely exist in main coal mining areas of China. When these coal seams are exploited, the pillar mining method is always employed. This leads to many coal pillars left in the upper coal seams as a protective barrier. As a result, these residual pillars will not only cause the loss of coal resources but also could trigger environmental issues and a serious of mine disasters. A theoretical model was built to analyse the effect of the residual pillars. From the theoretical model, it was found that four stress concentration areas were formed by the upper residual coal pillars. To address the issues of the residual coal pillars, Datong Coal Mine Group has developed an innovative technology of the roof cutting with a chainsaw. A new protective coal seam mining method using chainsaw roof-cutting technology is introduced. A numerical model is constructed to analyse the mining pressure distribution law in working face within the lower layer coal seam. From the numerical simulation, the new protective layer mining method could reduce about 15.2% of the advancing stress, which contributes a lot to controlling the mining pressure within the lower layer. The field measurement showed that the hydraulic support utilised at the site was at lower pressure levels, which proves the new protective seam mining method can significantly reduce the working face pressure.

The Adaptation Analysis of the Fully Mechanized Coal Mining Face of Huopu Mine’s Third Soft Coal Seam

2014 ◽  
Vol 1049-1050 ◽  
pp. 335-338 ◽  
Author(s):  
Fa Quan Liu ◽  
Xue Wen Geng ◽  
Yong Che ◽  
Xiang Cui
Keyword(s):  
Coal Seam ◽  
Coal Mining ◽  
Geological Condition ◽  
Soft Coal ◽  
Working Face ◽  
Mining Face ◽  
Soft Coal Seam ◽  
Working Resistance

To get the maximum coal in front of the working face of the 17# coal seam, we installed a longer beam which is 1.2m in length in the leading end of the original working face supports ZF3000/17/28, and know that working face supports’ setting load and working resistance are lower .We changed the original supports with shield supports ZY3800/15/33 that are adaptable in the geological condition and got the favorable affection.

scholarly journals A Mechanical Model of the Overlying Rock Masses in Undersea Coal Mining and a Stress-Seepage Coupling Numerical Simulation

2018 ◽  
Vol 2018 ◽  
pp. 1-14 ◽  
Author(s):  
Jie Fang ◽  
Lei Tian ◽  
Yanyan Cai ◽  
Zhiguo Cao ◽  
Jinhao Wen ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Coal Seam ◽  
Coal Mining ◽  
Water Inrush ◽  
Mining Area ◽  
Analysis Model ◽  
Fractured Zones ◽  
Working Face ◽  
Seam Mining ◽  
Overlying Strata

The water inrush of a working face is the main hidden danger to the safe mining of underwater coal seams. It is known that the development of water-flowing fractured zones in overlying strata is the basic path which causes water inrushes in working faces. In the engineering background of the underwater mining in the Longkou Mining Area, the analysis model and judgment method of crack propagation were created on the basis of the Mohr–Coulomb criterion. Fish language was used to couple the extension model into the FLAC3d software, in order to simulate the mining process of the underwater coal seam, as well as to analyze the initiation evolutionary characteristics and seepage laws of the fractured zones in the overlying strata during the advancing processes of the working face. The results showed that, during the coal seam mining process, the mining fractured zones which had been caused by the compression-shear and tension-shear were mainly concentrated in the overlying strata of the working face. Also, the open-off cut and mining working face were the key sections of the water inrush in the rock mass. The condition of the water disaster was the formation of a water inrush channel. The possible water inrush channels in underwater coal mining are mainly composed of water-flowing fractured zones which are formed during the excavation processes. The numerical simulation results were validated through the practical engineering of field observations on the height of water-flowing fractured zone, which displayed a favorable adaptability.

scholarly journals Roadway Surrounding Rock under Multi-Coal-Seam Mining: Deviatoric Stress Evolution and Control Technology

2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Dongdong Chen ◽  
En Wang ◽  
Shengrong Xie ◽  
Fulian He ◽  
Long Wang ◽  
...  
Keyword(s):  
Plastic Zone ◽  
Coal Seam ◽  
Coal Pillar ◽  
Surrounding Rock ◽  
Deviatoric Stress ◽  
Mine Pressure ◽  
Coal Face ◽  
Surrounding Rock Control ◽  
Seam Mining ◽  
Peak Value

Multi-coal-seam mining creates surrounding rock control difficulties, because the mining of a coal face in one seam can affect coal faces in another. We examine the effects of multi-coal-seam mining on the evolution of the deviatoric stress distribution and plastic zone in the roadway surrounding rock. In particular, we use numerical simulation, theoretical calculation, drilling detection, and mine pressure observation to study the distribution and evolution characteristics of deviatoric stress on Tailgate 8709 in No. 11 coal seam in Jinhuagong mine when the N8707 and N8709 coal faces in No. 7-4 coal seam and the N8707 and N8709 coal faces in No. 11 coal seam are mined. The evolution laws of deviatoric stress and the plastic zone of roadway surrounding rock in the advance and behind sections of the coal face are studied, and a corresponding control technology is proposed. The results show that the peak value of deviatoric stress increases with the advance of the coal face, and the positions of the peak value of deviatoric stress and the plastic zone become deeper. The deflection angle of the peak stress after mining at each coal face and the characteristics of the peak zone of deviatoric stress and the plastic zone of the roadway surrounding rock under the disturbance of multi-coal-seam mining are determined. In conclusion, the damage range in the roadway roof in the solid-coal side and coal pillar is large and must be controlled. A combined support technology based on high-strength and high pretension anchor cables and truss anchor cables is proposed; long anchor cables are used to strengthen the support of the roadway roof in the solid-coal side and coal pillar. The accuracy of the calculated plastic zone range and the reliability of the combined support technology are verified through drilling detection and mine pressure observation on site. This research can provide a point of reference for roadway surrounding rock control under similar conditions.

Sign in / Sign up

Export Citation Format

Share Document