scholarly journals Optimization of Remazol Black B Removal Using Biochar Produced from Caulerpa scalpelliformis Using Response Surface Methodology

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
R. Gokulan ◽  
S. Balaji ◽  
P. Sivaprakasam
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Dye Removal ◽  
Regression Coefficient ◽  
Process Conditions ◽  
Waste Biomass ◽  
Solution Ph ◽  
Box Behnken Design ◽  
Remazol Black B ◽  
Remazol Black

Optimization of process conditions for the removal of Remazol Black B was investigated using response surface methodology (Box–Behnken design). The biodecolorization of dye was studied using biochar produced from waste biomass of Caulerpa scalpelliformis (marine seaweeds). The reactions were optimized by varying sorbent dosage, solution pH, temperature, and initial dye concentration. The results indicated that dye removal efficiency of 80.30% was attained at an operating condition of 4 g/L (sorbent dosage), 2.0 (solution pH), 35°C (temperature), and 0.25 mmol/L (initial dye concentration). The regression coefficient of the developed model was calculated to be 97% which shows good fit of the model.

scholarly journals Study on optimal adsorption conditions of norfloxacin in water based on response surface methodology

2022 ◽  
Author(s):  
Ming Zhang ◽  
Kuo Zhang ◽  
Jinpeng Wang ◽  
Runjuan Zhou ◽  
Jiyuan Li ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Reaction Temperature ◽  
Polynomial Regression ◽  
Single Factor ◽  
Solution Ph ◽  
Box Behnken Design ◽  
Simulated Wastewater ◽  
Predicted Values ◽  
Single Factor Experiment

Abstract The waste pomelo peel was pyrolyzed at 400 °C to prepare biochar and used as adsorbent to remove norfloxacin (NOR) from simulated wastewater. The adsorption conditions of norfloxacin by biochar were optimized by response surface methodology (RSM). On the basis of single-factor experiment, the adsorption conditions of biochar dosage, solution pH and reaction temperature were optimized by Box-Behnken Design (BBD), and the quadratic polynomial regression model of response value Y1 (NOR removal efficiency) and Y2 (NOR adsorption capacity) were obtained respectively. The results show that the two models are reasonable and reliable. The influence of single factor was as follows: solution pH > biochar dosage > reaction temperature. The interaction between biochar dosage and solution pH was very significant. The optimal adsorption conditions after optimization were as follows: biochar dosage = 0.5 g/L, solution pH = 3, and reaction temperature = 45 °C. The Y1 and Y2 obtained in the verification experiment were 75.68% and 3.0272 mg/g, respectively, which were only 2.38% and 0.0242 mg/g different from the theoretical predicted values of the model. Therefore, the theoretical model constructed by response surface methodology can be used to optimize the adsorption conditions of norfloxacin in water.

scholarly journals Optimization of Methylene Blue Adsorption on Agricultural Solid Waste Using Box–Behnken Design (BBD) Combined with Response Surface Methodology (RSM) Modeling

2021 ◽  
Vol 12 (4) ◽  
pp. 4567-4583
Keyword(s):  
Methylene Blue ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Contact Time ◽  
Organic Dyes ◽  
Low Cost ◽  
Sem Analysis ◽  
Solution Ph ◽  
Box Behnken Design ◽  
Mb Adsorption

Tunics corm saffron (TCS) is a low-cost adsorbent that removes methylene blue (MB) from an aqueous solution. The TCS was characterized using FTIR and SEM analysis. The influence of MB adsorption variables such as TCS dose (0.4–2.4 g L−1), contact time (0–120 min), MB dye concentration (100–500 mg L−1) was optimized Box–Behnken design (BBD) combined with response surface methodology (RSM) modeling. All three variables among the main parameters significantly affected the removal efficiency by applying the quadratic regression analysis. The results showed that the predicted values for MB adsorption were close to the experimental values and were in good agreement. Besides, the r2 value (r2=0.970) indicates that the regression can predict response for the adsorption process in the studied range. The optimum BBD-RSM for MB removal of 89.48 % was recorded at a TCS dose of 1.78 g L−1, contact time of 56 min, MB dye concentration of 176 mg L–1 at solution pH of 5.4 temperature 21 °C. Excellent regeneration of TCS to remove MB in sixth consecutive adsorption-desorption cycles. This work highlights that TCS offers tremendous potential as a low-cost for organic dyes removal from wastewaters.

scholarly journals Adsorption of Remazol Brillant Green 6B (RBG 6B) on chitin: process optimization using response surface methodology

2018 ◽  
Vol 20 (2) ◽  
pp. 257-268 ◽  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Removal Efficiency ◽  
Dye Removal ◽  
Freundlich Isotherm ◽  
Sem Analysis ◽  
Second Order ◽  
Operating Conditions ◽  
Coefficient Of Determination ◽  
Solution Ph

In the present study, the adsorption of Remazol Brillant Green 6B (RBG 6B) on chitin which characterized by BET, FTIR, XRD and SEM analysis was studied. Response surface methodology (RSM) was applied to determine interaction between solution pH, initial RBG 6B concentration and chitin dosage being individual variables and to optimize operating conditions. According to results of variance analysis (ANOVA), the second order polynomial model was statistically significant (P<0.0001) and coefficient of determination value (R2=0.98) was high. It was determined that dye removal efficiency increased when low solution pH and initial RBG 6B dye concentration and high chitin dosage were used. The maximum dye removal efficiency was obtained as 88% at solution pH of 3.0, initial RBG 6B concentration of 75 mg L-1 and chitin dosage of 5.0 g L-1. The isotherms and kinetics studies showed that Freundlich isotherm and pseudo-second-order kinetics model fitted well to the RBG 6B adsorption data.

Statistical Optimization for Dye Removal from Aqueous Solution by Cross-linked Chitosan Composite

2020 ◽  
Vol 14 (2) ◽  
pp. 1 ◽  
Author(s):  
Ali Jawad ◽  
Mohd shafiq Bin Aazmi ◽  
Ali Jawad
Keyword(s):  
Aqueous Solution ◽  
Response Surface Methodology ◽  
Methyl Orange ◽  
Response Surface ◽  
Removal Efficiency ◽  
Dye Removal ◽  
Statistical Optimization ◽  
P Value ◽  
Box Behnken Design ◽  
Chitosan Composite

Response surface methodology-Box–Behnken design (RSM-BBD) was employed to optimize the methyl orange (MO) dye removal efficiency from aqueous solution by cross-linked chitosan-tripolyphosphate/nano-titania composite (Chi-TPP/NTC). The influence of pertinent parameters, i.e. A: TiO2 loading (0- 50 %), B: dose (0.04-0.14 g), C: pH (4-10), and D: temperature (30-50 oC) on the MO removal efficiency were tested and optimized using RSM-BBD. The F-values of BBD model for MO removal efficiency was 93.4 (corresponding p-value < 0.0001). The results illustrated that the highest MO removal efficiency (87.27 %) was observed at the following conditions: TiO2 loading (50% TiO2), dose (0.09 g), pH 4.0, and temperature of 40 oC.  

Optimisation of the Oil Extraction from Nigella sativa Seeds Using Response Surface Methodology

2017 ◽  
Vol 68 (2) ◽  
pp. 331-336
Author(s):  
Gabriela Isopencu ◽  
Mirela Marfa ◽  
Iuliana Jipa ◽  
Marta Stroescu ◽  
Anicuta Stoica Guzun ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Nigella Sativa ◽  
Polynomial Equation ◽  
Herbaceous Plant ◽  
Box Behnken Design ◽  
Pareto Analysis ◽  
Black Cumin ◽  
Mediterranean Countries ◽  
Experimental Values

Nigella sativa, also known as black cumin, an annual herbaceous plant growing especially in Mediterranean countries, has recently gained considerable interest not only for its use as spice and condiment but also for its healthy properties of the fixed and essential oil and its potential as a biofuel. Nigella sativa seeds fixed oil, due to its high content in linoleic acid followed by oleic and palmitic acid, could be beneficial to human health. The objective of this study is to determine the optimum conditions for the solvent extraction of Nigella sativa seeds fixed oil using a three-level, three-factor Box-Behnken design (BBD) under response surface methodology (RSM). The obtained experimental data, fitted by a second-order polynomial equation were analysed by Pareto analysis of variance (ANOVA). From a total of 10 coefficients of the statistical model only 5 are important. The obtained experimental values agreed with the predicted ones.

scholarly journals Homogenate Extraction of Crocins from Saffron Optimized by Response Surface Methodology

2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Yingpeng Tong ◽  
Yu Jiang ◽  
Dan Guo ◽  
Yongqiu Yan ◽  
Shiping Jiang ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Ethanol Concentration ◽  
Extraction Yield ◽  
Extraction Time ◽  
Process Conditions ◽  
Extraction Temperature ◽  
Single Factor ◽  
Extraction Voltage ◽  
Homogenate Extraction

Saffron, which has many kinds of biological activities, has been widely used in medicine, cosmetics, food, and other fields of health promotion industries. Crocins are the main component of saffron (Crocus sativus L.). At present, most of the extraction methods for crocins require long time or special instruments to complete the process and some of them are not suitable for industrial production at present. In this article, homogenate extraction technology which is a convenient and efficient method was developed for crocins extraction from saffron. Firstly, the influences of extraction voltage, extraction time, ethanol concentration, and temperature on crocins yield were studied by single factor experiments; and then response surface methodology (RSM) was used to optimize levels of four variables based on the result of single factor experiments. Results showed that the optimum extraction process conditions for crocins were as follows: extraction voltage, 110 V; ethanol concentration, 70%; extraction temperature, 57°C; and extraction time, 40 s. Based on these conditions, the extraction yield of crocins can reach 22.76% which is higher than ultrasonic extraction method. Therefore, homogenate extraction is an effective way to extract crocins from saffron with higher extraction yield and shorter extraction time.

scholarly journals Optimization of Crude Oil and PAHs Degradation by Stenotrophomonas rhizophila KX082814 Strain through Response Surface Methodology Using Box-Behnken Design

2016 ◽  
Vol 2016 ◽  
pp. 1-13 ◽  
Author(s):  
Praveen Kumar Siddalingappa Virupakshappa ◽  
Manjunatha Bukkambudhi Krishnaswamy ◽  
Gaurav Mishra ◽  
Mohammed Ameenuddin Mehkri
Keyword(s):  
Response Surface Methodology ◽  
Crude Oil ◽  
Response Surface ◽  
Oxygen Demand ◽  
Inoculum Size ◽  
Coefficient Of Determination ◽  
Oil Removal ◽  
Box Behnken Design ◽  
Stenotrophomonas Rhizophila ◽  
Crude Oil Removal

The present paper describes the process optimization study for crude oil degradation which is a continuation of our earlier work on hydrocarbon degradation study of the isolate Stenotrophomonas rhizophila (PM-1) with GenBank accession number KX082814. Response Surface Methodology with Box-Behnken Design was used to optimize the process wherein temperature, pH, salinity, and inoculum size (at three levels) were used as independent variables and Total Petroleum Hydrocarbon, Biological Oxygen Demand, and Chemical Oxygen Demand of crude oil and PAHs as dependent variables (response). The statistical analysis, via ANOVA, showed coefficient of determination R2 as 0.7678 with statistically significant P value 0.0163 fitting in second-order quadratic regression model for crude oil removal. The predicted optimum parameters, namely, temperature, pH, salinity, and inoculum size, were found to be 32.5°C, 9, 12.5, and 12.5 mL, respectively. At this optimum condition, the observed and predicted PAHs and crude oil removal were found to be 71.82% and 79.53% in validation experiments, respectively. The % TPH results correlate with GC/MS studies, BOD, COD, and TPC. The validation of numerical optimization was done through GC/MS studies and   % removal of crude oil.

Sign in / Sign up

Export Citation Format

Share Document