Influence of vacuum microwave drying parameters on the physicochemical properties of red beetroots

In recent years, the consumption of red beetroots has increased significantly due to its good taste, high nutritional value and abundant active compounds. Red beetroot is prone to spoilage due to its high moisture content, making it perishable. Vacuum microwave drying is a gentle drying method by inducing fast water evaporation from food products at low temperature, which can improves the product quality. The objective of this study was to investigate the effects of vacuum microwave drying parameters, including microwave power (500, 1000, and 1500 W) and vacuum degree (50, 70, and 90 KPa), on the physicochemical properties (drying time, rehydration ratio, color change, and contents of betalain and total phenolic) of red beetroots. The results showed that microwave power and vacuum degree had significant effects on the physicochemical properties of red beetroots. All the red beetroots after vacuum microwave drying had higher lightness (L*), lower redness (a*) and yellowness (b*) than that of fresh red beetroots. The drying time, rehydration ratio, betacyanin content and betaxanthin content of red beetroots decreased significantly with the increase of microwave power (P < 0.05), while the rehydration ratio, color parameters (a*, b*, and chroma values), betacyanin content and betaxanthin content of red beetroots significantly increased with the increase of vacuum degree (P < 0.05). Compared with other microwave powers, the red beetroots dried at 500 W showed longer drying time, higher rehydration ratio, more yellowish hue, and higher contents of betacyanin and betaxanthin. The lowest values of total color difference (∆E) and hue angle (H°) of dried red beetroots were obtained at microwave power of 1500 W. The dried red beetroots obtained at 90 KPa had the shortest drying time, the highest rehydration ratio, the best color, and the highest contents of betacyanin and betaxanthin. Meanwhile, the red beetroots dried at 50 KPa had the highest total phenolic content (12.47 ± 0.09 mg GAE/g). Based on the physicochemical properties of red beetroots, vacuum microwave drying at low microwave powers and high vacuum degree appears to be a suitable method for drying red beetroots.

Research of physicochemical properties and antioxidant activity of beetroots as affected by vacuum microwave drying conditions

The object of research is the beetroots, dried by vacuum microwave drying at different conditions. Physicochemical properties and antioxidant activity of beetroots were studied using vacuum microwave drying at different microwave power (500, 1000, and 1500 W), vacuum degree (–0.05, –0.07, and –0.09 MPa) and sample thickness (2, 4, and 6 mm). A colorimeter was used to evaluate the color quality of beetroots. Colorimetric methods were used to determinate contents of betalain, ascorbic acid and total flavonoid, and antioxidant activity (ferric reducing antioxidant power assay) of beetroots. Results showed that the drying time decreased with increasing microwave power and vacuum degree, while increased significantly with the increase of sample thickness. The lightness (L*) of dried beetroots was higher than that of fresh beetroots. The values of redness (a*) increased with the increase of vacuum degree. The values of yellowness (b*) increased with the growth of vacuum degree and microwave power, while reduced as the sample thickness added. The total color difference (∆E) of dried beetroots reduced with increasing vacuum degree, and displayed the lowest value (5.95) at a vacuum degree of –0.09 MPa as compared to fresh beetroots. The content of betacyanin, betaxanthin and ascorbic acid displayed a declining tendency with the growth of microwave power, while increased with the increase of vacuum degree. And the total flavonoid content of beetroots illustrated a decreasing tendency with the increase of vacuum degree, microwave power and sample thickness. The ferric reducing antioxidant power (FRAP) of dried beetroots decreased significantly with the increase of microwave power, and showed the highest value (14.70 mg trolox equivalents/g) at a microwave power of 500 W. The most favorable conditions for vacuum microwave drying of beetroots were microwave power of 500 W, vacuum degree of –0.09 MPa and sample thickness of 2 mm. It leads to better physicochemical properties of bioactive compounds and higher antioxidant activity of dried beetroots. The dried beetroots can be used as functional foods and value-added food products.

Effect of New Frying Technology on Starchy Food Quality

Frying is commonly used by consumers, restaurants, and industries around the globe to cook and process foods. Compared to other food processing methods, frying has several potential advantages, including reduced processing times and the creation of foods with desirable sensory attributes. Frying is often used to prepare starchy foods. After ingestion, the starch and fat in these foods are hydrolyzed by enzymes in the human digestive tract, thereby providing an important source of energy (glucose and fatty acids) for the human body. Conversely, overconsumption of fried starchy foods can promote overweight, obesity, and other chronic diseases. Moreover, frying can generate toxic reaction products that can damage people’s health. Consequently, there is interest in developing alternative frying technologies that reduce the levels of nutritionally undesirable components in fried foods, such as vacuum, microwave, air, and radiant frying methods. In this review, we focus on the principles and applications of these innovative frying technologies, and highlight their potential advantages and shortcomings. Further development of these technologies should lead to the creation of healthier fried foods that can help combat the rise in diet-related chronic diseases.

Effect of Filtrated Osmotic Solution Based on Concentrated Chokeberry Juice and Mint Extract on the Drying Kinetics, Energy Consumption and Physicochemical Properties of Dried Apples

Background: Filtration of osmotic solution affects selective penetration during osmotic dehydration (OD), and after drying is finished, this can influence the chemical composition of the material, which is also modified by OD. Methods: Osmotic dehydration was carried out in filtrated and non-filtrated concentrated chokeberry juice with the addition of mint infusion. Then, this underwent convective drying, vacuum-microwave drying and combined convective pre-drying, followed by vacuum-microwave finishing drying. Drying kinetics were presented and mathematical models were selected. The specific energy consumption for each drying method was calculated and the energy efficiency was determined. Results and Discussion: The study revealed that filtration of osmotic solution did not have significant effect on drying kinetics; however, it affected selective penetration during OD. The highest specific energy consumption was obtained for the samples treated by convective drying (CD) (around 170 kJ·g−1 fresh weight (fw)) and the lowest for the samples treated by vacuum-microwave drying (VMD) (around 30 kJ·g−1 fw), which is due to the differences in the time of drying and when these methods are applied. Conclusions: Filtration of the osmotic solution can be used to obtain the desired material after drying and the VMD method is the most appropriate considering both phenolic acid content and the energy aspect of drying.

Effect of Fertilisation on the Quality of Dried Coriander (Coriandrum sativum L.) and Lovage (Levisticum officinale)

The study presents the effects of fertilisation on selected quality parameters of the dried material obtained from plants of lovage and coriander. During the crop production process, the plants were treated with two fertilisers containing substances potentially acting as elicitors. The dried material was obtained in course of a drying process carried out in optimum conditions and based on the CD-VMFD method which combines convective pre-drying (CD) at a low temperature (40 °C) with vacuum-microwave finish drying with the use of 240 W microwaves (VMFD). The quality of the dried material was evaluated through measurement of the total contents of polyphenols, total antioxidant potential (ABTS and DPPH method), and the profile of volatile compounds (headspace-solid phase microextractio-HS-SPME) as well as assessment of the colour. It was found that by applying first fertilisation (with organic components) it is possible to significantly increase the contents of both bioactive compounds and volatile substances responsible for the aroma. It was determined that the higher content of bioactive compounds was related to the composition of the first fertiliser, presumably the extract from common nettle. The study showed that the application of the first fertiliser contributed to enhanced quality parameters of the raw material obtained.