scholarly journals Experimental Study on the Resistance of Synthetic Penicillin Solid Lipid Nanoparticles to Clinically Resistant Staphylococcus aureus

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Enliang Zhao ◽  
Tonghui Yi ◽  
Juan Du ◽  
Jing Wang ◽  
Shan Cong ◽  
...  
Keyword(s):  
Staphylococcus Aureus ◽  
Particle Size ◽  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Lipid Nanoparticles ◽  
Inhibitory Effect ◽  
Polydispersity Index ◽  
Drug Resistant ◽  
Solid Lipid

Background. With the increasing resistance of antibiotics to bacteria, new and effective methods are needed to transform existing antibiotics to solve the problem of long development cycles for new drugs. The antibiotic nanodelivery system has proven to be a promising strategy. Aim. The purpose of this study is to synthesize penicillin solid lipid nanoparticles (penicillin SLNs) to enhance the antibacterial activity of penicillin against drug-resistant Staphylococcus aureus. Materials and Methods. Penicillin SLNs were synthesized. And particle size, the polydispersity index (PI), and zeta potential (ZP) of penicillin SLNs were measured. The surface morphology of penicillin SLNs was observed using a transmission electron microscope. Results. The particle size of penicillin SLNs is 112.3 ± 11.9   nm , the polydispersity index (PI) and zeta potential (ZP) of penicillin SLNs are 0.212 ± 0.03 and − 27.6 ± 5.5   mV . The encapsulation efficiency and drug loading were 98.31 ± 1.2 % and 4.98 ± 0.05 ( % w / w ), respectively. Penicillin SLNs had a more significant inhibitory effect on the growth of methicillin-sensitive Staphylococcus aureus (MSSA) after the drug and the bacteria were incubated for 12 hours. The number of MRSA colonies in the penicillin group increased after 12 hours, while the number of MRSA colonies in the penicillin SLNs group did not change significantly. Conclusion. Penicillin SLNs enhance the ability of penicillin to enter cells and increase the concentration of penicillin in the cell and also extend the residence time of penicillin in the cell. Our findings indicated that penicillin SLNs enhance the inhibitory effect of penicillin on drug-resistant Staphylococcus aureus.

scholarly journals Preparation and Characterization of Solid Lipid Nanoparticles Loaded with Cisplatin

2018 ◽  
Vol 8 (6) ◽  
pp. 125-131
Author(s):  
Indrayani D. Raut ◽  
Rajendra C. Doijad ◽  
Shrinivas K. Mohite ◽  
Arehalli S. Manjappa
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Acquired Resistance ◽  
Spherical Shape ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Platinum Drug ◽  
Solid Lipid

Cisplatin (Cis diaminedichloro platinum) was the first platinum drug to be used as an anticancer drug, and it is widely used in the treatment of testicular, head, neck, ovarian and lung cancer. The use of Cisplatin is limited due to its intrinsic and acquired resistance and severe side effects such as chronic neurotoxicity and nephrotoxicity. The colloidal carriers such as emulsion, liposomes, polymeric nanoparticles have been extensively studied to overcome above limitations. The solid lipid nanoparticles (SLNs), amongst other colloidal carriers, were found to be an ideal carrier for lipophillic drug for better stability and release retardation. Cisplatin loaded solid lipid nanoparticles was prepared by microemulsion technique. Stearic acid was used as lipid. The other excipients were used as DPPG, Soya lecithin and Poloxamer P407  and acidic buffer  PH4. Also used Probe sonication for 10 min at 79 Amplitude. Cisplatin SLNs Batch C13 showed particle size of 119.23±1.52 nm, Zeta potential of -37.33±2.47 mV, % Entrapment efficiency of  90.2 ± 2.1 %., % Drug loading capacity of 1.62 ± 1.34 %., The TEM study of optimized Cisplatin SLN illustrated the spherical shape of nanoparticles. Total release amount of Cisplatin was 82.62± 2.04 % after 48 hrs. The formulation performed kinetics study followed Peppas plot equation The SLNs of Cisplatin met all the requirements of a colloidal drug delivery system. They had particle size in nanosize; their size distribution was narrow and all the particles were in spherical shape and stable. Keywords: Cisplatin, Solid Lipid nanoparticles, zeta potential, Particle size, Transmission electron Microscopy.

scholarly journals USING A SIMPLEX CENTROID DESIGN AND FATTY ACIDS TO OPTIMIZE FLUCONAZOLE-LOADED SOLID LIPID NANOPARTICLES (SLNs)

2021 ◽  
pp. 206-209
Author(s):  
PAKORN KRAISIT ◽  
NAMON HIRUN ◽  
PREMJIT LIMPAMANOCH ◽  
SONTAYA LIMMATVAPIRAT
Keyword(s):  
Fatty Acids ◽  
Particle Size ◽  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
Lipid Nanoparticles ◽  
Weak Acid ◽  
Polydispersity Index ◽  
Solid Lipid ◽  
Predicted Values ◽  
Experimental Values

Objective: This study aimed to prepare fluconazole (FZ)-loaded solid lipid nanoparticles (SLNs) using a simplex centroid design and fatty acids to optimize the SLNs to get small-sized nanoparticles with a narrow distribution. Methods: Hot emulsification was used to prepare the FZ-loaded SLNs. Stearic acid (Sa) (X1), palmitic acid (Pa) (X2), and myristic acid (Ma) (X3) were the solid lipids. The effect of various types and amounts of fatty acids on the particle size, polydispersity index, zeta potential, and pH of the SLNs was studied using the simplex centroid design. Results: The particle size of all formulations ranged between 16.49 nm and 56.65 nm, and the polydispersity index (PDI) ranged between 0.258 and 0.676, indicating a relatively narrow size distribution. The zeta potential ranged from–7.47 to–12.2 mV. The pH was around 4.63–4.77, indicating that the SLN system was a weak acid. Design-Expert® software was used to design the responses of all model formulations and to select the optimized formulation. The optimal formulation comprised 0.190 g Sa, 0.048 g Pa, and 0.002 g Ma. The experimental values of the particle size and PDI of the optimal formulation did not differ significantly from the predicted values and lay within a 95% confidence interval (CI). Conclusion: Therefore, the simplex centroid design using fatty acids could efficiently formulate and optimize FZ-loaded SLNs.

scholarly journals Hyaluronate Targeted Solid Lipid Nanoparticles of Etoposide: Optimization andIn VitroCharacterization

2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
Jaleh Varshosaz ◽  
Parviz Mohammadi Ghalaei ◽  
Farshid Hassanzadeh
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Aqueous Phase ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Cationic Lipid ◽  
Lipid Nanoparticles ◽  
Cetyl Alcohol ◽  
Phase Ratio ◽  
Solid Lipid

The aim of the present study was preparation of hyaluronan (HA) targeted solid lipid nanoparticles (SLNs) of etoposide. SLNs were prepared by an emulsification-solvent evaporation method and physically coated with HA. Four variables, including the ratio of cetyl alcohol to cationic lipid, cationic lipid type (stearylamine (SA) or dodecylamine (DDA)), lipid to HA ratio, and organic to aqueous phase ratio, were studied in an irregular fraction factorial design. Four responses, including particle size, zeta potential, drug loading, and 24-hour release efficiency percent, were measured for each formulation and then the optimization was carried out. The percent of HA coated on the SLNs was calculated by CHN elemental analysis which was shown to be about 55.89%. The cationic lipid type and the ratio of cetyl alcohol to cationic lipid had the highest influence on particle size and zeta potential, respectively. The highest effects of the ratio of lipid to HA and the organic to aqueous phase ratio were on the drug loading efficiency of SLNs. The optimized formulation of SLNs was obtained by SA, the equal proportion of cetyl alcohol and cationic lipid, the ratio of 1.5 for lipid to HA, and 10% of organic phase to aqueous phase.

Solid Lipid Nanoparticles for Topical Delivery of Acitretin for the Treatment of Psoriasis by Design of Experiment

2020 ◽  
Vol 12 (2) ◽  
pp. 4474-4491
Author(s):  
Rajkumar Aland ◽  
Ganesan M ◽  
P. Rajeswara Rao ◽  
Bhikshapathi D. V. R. N.
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Tem Analysis ◽  
In Vitro Drug Release ◽  
Solid Lipid

The main objective for this investigation is to develop and optimize the solid lipid nanoparticles formulation of acitretin for the effective drug delivery. Acitretin loaded SLNs were prepared by hot homogenization followed by the ultrasonication using Taguchi’s orthogonal array with eight parameters that could affect the particle size and entrapment efficiency. Based on the results from the analyses of the responses obtained from Taguchi design, three different independent variables including surfactant concentration (%), lipid to drug ratio (w/w) and sonication time (s) were selected for further investigation using central composite design. The  lipid Dynasan-116, surfactant poloxomer-188 and co surfactant egg lecithin resulted in better percent drug loading and evaluated for particle size, zeta potential, drug entrapment efficiency, in vitro drug release and stability. All parameters were found to be in an acceptable range. TEM analysis has demonstrated the presence of individual nanoparticles in spherical shape and the results were compatible with particle size measurements.  In vitro drug release of optimized SLN formulation (F2) was found to be 95.63 ± 1.52%, whereas pure drug release was 30.12 after 60 min and the major mechanism of drug release follows first order kinetics release data for optimized formulation (F2) with non-Fickian (anomalous) with a strong correlation coefficient (R2 = 0.94572) of Korsemeyer-Peppas model. The total drug content of acitretin gel formulation was found to 99.86 ± 0.012% and the diameter of gel formulation was 6.9 ± 0.021 cm and that of marketed gel was found to be 5.7 ± 0.06 cm, indicating better spreadability of SLN based gel formulation. The viscosity of gel formulation at 5 rpm was found to be 6.1 x 103 ± 0.4 x 103 cp. The release rate (flux) of acitretin across the membrane and excised skin differs significantly, which indicates about the barrier properties of skin. The flux value for SLN based gel formulation (182.754 ± 3.126 μg cm−2 h−1) was found to be higher than that for marketed gel (122.345 ± 4.786 μg cm−2 h−1). The higher flux and Kp values of SLN based gel suggest that it might be able to enter the skin easily as compared with marketed gel with an advantage of low interfacial tension of the emulsifier film that ensures an excellent contact to the skin. This topically oriented SLN based gel formulation could be useful in providing site-specific dermal treatment of psoriasis

scholarly journals Development of Solid Lipid Nanoparticles and Nanostructured Lipid Carriers of Loteprednol Etabonate: Physicochemical Characterization and Ex Vivo Permeation Studies

2021 ◽  
Author(s):  
Burcu Üner ◽  
Samet Özdemir ◽  
Çetin Taş ◽  
Yıldız Özsoy ◽  
Melike Üner
Keyword(s):  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Physicochemical Characterization ◽  
Lipid Nanoparticles ◽  
Nanostructured Lipid Carriers ◽  
Fickian Diffusion ◽  
Control Group ◽  
Loteprednol Etabonate ◽  
Solid Lipid

Abstract Purpose Loteprednol etabonate (LE) is a new generation corticosteroid that is used for the treatment of inflammatory and allergic conditions of the eye, and management of seasonal allergic rhinitis nasally. LE which is a poorly soluble drug with insufficient bioavailability, has a high binding affinity to steroid receptors. Sophisticated colloidal drug delivery systems of LE could present an alternative for treatment of inflammatory and allergic conditions of the skin. For this purpose, solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) were attempted to improve for transdermal LE delivery for the first time. Methods SLN and NLC were produced by hot homogenization and ultrasonication technique. Formulations were characterized by dynamic light scattering, scanning electron microscopy, fourier transform infrared spectroscopy and differential scanning calorimetry. Their physical stability was monitored for 3 months of storage. Drug release profiles and permeation properties of SLN and NLC through the porcine skin were investigated. Results It was determined that SLN and NLC below 150 nm particle size had a homogeneous particle size distribution as well as high drug loading capacities. They were found to be stable both physically and chemically at room temperature for 90 days. In terms of release kinetics, it was determined that they released from SLN and NLC in accordance with Fickian diffusion release. Formulations prepared in this study were seen to significantly increase drug penetration through pig skin compared to the control group (p ≤ 0.05). Conclusion SLN and NLC formulations of LE can be stated among the systems that can be an alternative to conventional systems with less side-effect profile in the treatment of inflammatory problems on the skin.

scholarly journals FORMULATION AND EVALUATION OF DASATINIB LOADED SOLID LIPID NANOPARTICLES

2018 ◽  
Vol 10 (12) ◽  
pp. 14 ◽  
Author(s):  
M. Yasmin Begum ◽  
Prathyusha Reddy Gudipati
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Size Analysis ◽  
Compatibility Study ◽  
Solid Lipid ◽  
Poly Dispersity Index

Objective: The aim of present work was to formulate and evaluate Dasatinib (DST) loaded solid lipid nanoparticles (SLNs) as a potential anticancer drug delivery system by enhancing its solubility.Methods: SLNs consist of a solid lipid matrix where the drug was incorporated. Surfactants of GRAS grade were used to avoid aggregation and to stabilize the SLNs. DST-SLNs formulations of varying concentrations were prepared by high speed homogenization technique and evaluated for drug excipients compatibility study, poly-dispersity index, particle size analysis, surface morphology, zeta potential and drug release features.Results: It was observed that DST-SLNs with optimum quantities of poloxomer: lecithin ratio showed 88.06% drug release in 6h with good entrapment efficiency of 76.9±0.84 %. Particle size, Poly dispersity index, zeta potential and drug entrapment efficiency for the optimized formulation was found to be optimum. Stability studies revealed that the entrapment efficiency of the SLN dispersion stored in 4 °C was stable.Conclusion: Thus, it can be concluded that formulations of DST loaded SLNs are suitable carriers for improving the solubility and dissolution related problems. 

scholarly journals Atorvastatin Solid Lipid Nanoparticles as a Promising Approach for Dermal Delivery and an Anti-inflammatory Agent

2020 ◽  
Vol 21 (7) ◽  
Author(s):  
Seyed Sadegh Shahraeini ◽  
Jafar Akbari ◽  
Majid Saeedi ◽  
Katayoun Morteza-Semnani ◽  
Shidrokh Abootorabi ◽  
...  
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Solid Lipid ◽  
Inflammatory Agent ◽  
Drug Entrapment Efficiency ◽  
Anti Inflammatory ◽  
Dermal Delivery

Abstract In the current research, the main focus was to overcome dermal delivery problems of atorvastatin. To this end, atorvastatin solid lipid nanoparticles (ATR-SLNs) were prepared by ultra-sonication technique. The prepared SLNs had a PDI value of ≤ 0.5, and the particle size of nanoparticles was in the range 71.07 ± 1.72 to 202.07 ± 8.40 nm. It was noticed that, when the concentration of lipid in ATR-SLNs increased, the size of nanoparticles and drug entrapment efficiency were also increased. Results showed that a reduction in the HLB of surfactants used in the preparation of SLN caused an increase in the particle size, zeta potential (better stability), and drug entrapment efficiency. Despite Tween and Span are non-ionic surfactants, SLNs containing these surfactants showed a negative zeta potential, and the absolute zeta potential increased when the concentration of Span 80 was at maximum. DSC thermograms, FTIR spectra, and x-ray diffraction (PXRD) pattern showed good incorporation of ATR in the nanoparticles without any chemical interaction. In vitro skin permeation results showed that SLN containing atorvastatin was capable of enhancing the dermal delivery of atorvastatin where a higher concentration of atorvastatin can be detected in skin layers. This is a hopeful promise which could be developed for clinical studies of the dermal delivery of atorvastatin nanoparticles as an anti-inflammatory agent.

scholarly journals PREPARATION, CHARACTERIZATION, AND FORMULATION OF SOLID LIPID NANOPARTICLES LOTION FROM MULBERRY ROOTS (MORUS ALBA L.)

2020 ◽  
pp. 182-186
Author(s):  
MUHAMAD WILDAN NUGRAHA ◽  
RADITYA ISWANDANA ◽  
MAHDI JUFRI
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
High Speed ◽  
Tween 80 ◽  
Lipid Nanoparticles ◽  
Morus Alba ◽  
Glyceryl Monostearate ◽  
Optimum Result ◽  
Solid Lipid

Objective: Tween 80 has been used as a solvent for the extraction of phenolic compounds because this surfactant has both hydrophilic and hydrophobicproperties. Solid lipid nanoparticles (SLNs) have been developed to improve penetration through the skin layer. We investigated the efficacy of usingthe microwave-assisted micellar extraction (MAME) approach for extracting oxyresveratrol from Morus alba roots and also to develop an SLN lotion.Methods: The M. alba roots were extracted with Tween 80 in a microwave for 18 min, and the extract was used to develop SLN with differentconcentrations of glyceryl monostearate. The SLNs from M. alba root extracts were prepared by a high-speed homogenization technique (25,000 rpmfor 15 min). The SLNs produced were characterized as per particle size, polydispersity index (PDI), and zeta potential. The SLNs with the bestcharacteristics were used to formulate a lotion using a high-pressure homogenizer.Results: Extraction using MAME showed improved extraction efficiency. The oxyresveratrol concentration from the extract was 2.77%. The SLN with2.5% glyceryl monostearate showed the optimum result, with a particle size of 130.20 nm, a PDI of 0.278, and a zeta potential of −21.8 mV. The SLNlotion exhibited a particle size of 285.9 nm and a PDI of 0.360. The SLN lotion also had good penetration, with a flux of 4.70 μg cm−2/h.Conclusion: MAME is an efficient method for extracting oxyresveratrol from M. alba roots. The SLN with 2.5% glyceryl monostearate exhibited theoptimum characteristics, and the SLN lotion showed good characteristics, including skin penetration.

scholarly journals Formulation of Solid Lipid Nanoparticles of Cilnidipine for the Treatment of Hypertension

2019 ◽  
Vol 9 (3) ◽  
pp. 212-221 ◽  
Author(s):  
Aparna Bhalerao ◽  
Pankaj Prakash Chaudhari
Keyword(s):  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
Encapsulation Efficiency ◽  
Drug Loading ◽  
Lipid Nanoparticles ◽  
Water Soluble ◽  
Solid Lipid Nanoparticle ◽  
Solid Lipid ◽  
Lipid Nanoparticle

Cilinidipine is a fourth generation N and L-type calcium channel antagonists used alone or in combination with another drug to treat hypertension. Cilnidipine is poorly water -soluble, BCS class II drug with 6 to 30 percent oral bioavailability due to first pass metabolism. So to protect the drug from degradation and improve its dissolution, solid lipid nanoparticles were prepared. Glyceryl monostearate was selected as lipid while span 20: tween 20 were selected as surfactant blends. The formulations were evaluated for various parameters, as percent transmittance, drug content, percent encapsulation efficiency; percent drug loading, In vitro drug release and particle size. Optimized formulation was lyophilized using lactose as a cryo-protectant. The lyophilized formulation was evaluated for micromeritic properties, particle size and in vitro dissolution. It was further evaluated for DSC, XRD, and SEM. Percent encapsulation efficiency and percent drug loading of optimized formulation (F3) were 78.66percent and 9.44percent respectively. The particle size of F3 formulation without drug was 204 nm and with the drug was 214 nm. The particle size of the reconstituted SLN was 219 nm. In DSC study, no obvious peaks for cilnidipine were found in the SLN of cilnidipine indicated that the cilnidipine must be present in a molecularly dissolved state in SLN. In X-ray diffractometry absence of peaks representing crystals of cilnidipine in SLN indicated that the drug was in an amorphous or disordered crystalline phase in the lipid matrix. Thus, solid lipid nanoparticle formulation is a promising way to enhance the dissolution rate of cilnidipine. Keywords: Cilnidipine, Solid Lipid Nanoparticle, Hypertension

Formulation and Evaluation of Solid Lipid Nanoparticles for controlled delivery of Zidovudine

2021 ◽  
pp. 2548-2556
Author(s):  
Sonia Dhiman ◽  
Gurjeet Singh Thakur ◽  
Shivangi Anand ◽  
Priyanka Yadav
Keyword(s):  
Drug Delivery ◽  
High Pressure ◽  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
Controlled Drug Delivery ◽  
Lipid Nanoparticles ◽  
Polydispersity Index ◽  
High Pressure Homogenization ◽  
X Ray ◽  
Solid Lipid

Zidovudine is one of the chief nucleoside analogue and reverse inhibitor licensed for HIV infection which is placed along with a group of retroviruses. The present research study on Zidovudine solid dosage form surveyed the feasibility utilizing solid lipid nanoparticles (SLNs) for controlled drug delivery of zidovudine embracing glyceryl behenate as lipidic material, tween 80 as a stabilizer and blend of sodium chelate with poloxamer as surfactant. The SLNs were prepared utilizing high pressure homogenization followed by ultrasonication method. The prepared SLNs were characterized by particle size analysis, polydispersity index, zeta potential, DSC, TEM, IR spectroscopy, and X-ray diffractometry. Narrow size distribution of the particles was marked having polydispersity index values under 0.8. The high zeta potential of the different SLN formulations additionally showed their physical stability. Differential scanning calorimetry and powder X-ray diffraction showed decline in crystallinity of drug in the nanoparticle formulation. In vitro release study showed sustained release for up to 12 hours in the SLN formulations prepared. The current study results revealed that zidovudine SLN formulation prepared by high pressure homogenization followed by ultrasonication is a suitable method for controlled drug delivery system.

Sign in / Sign up

Export Citation Format

Share Document