scholarly journals A New Planar Multiband Antenna for GPS, ISM and WiMAX Applications

2017 ◽  
Vol 7 (4) ◽  
pp. 2018 ◽  
Author(s):  
I. Zahraoui ◽  
A. Errkik ◽  
M. C. Abounaima ◽  
A. Tajmouati ◽  
L. E. Abdellaoui ◽  
...  
Keyword(s):  
Radiation Pattern ◽  
Patch Antenna ◽  
Input Impedance ◽  
Microstrip Line ◽  
Ground Plane ◽  
Ground Structure ◽  
Entire Area ◽  
Multiband Antenna ◽  
Measurement Results ◽  
Good Agreement

In this paper a design of a new antenna with modified ground plane is validated for multiband applications. The proposed modified ground structure is incorporated with a patch antenna to boost the performance. The antenna’s entire area is 59.5x47mm<sup>2</sup> and is printed on an FR-4 substrate and fed by a 50 Ohm microstrip line.  This structure is validated in the GPS (1.56-1.58 GHz) band at 1.57 GHz, in the ISM (2.43-2.49 GHz) band at 2.45GHz and in the WiMAX (3.50-3.56 GHz) band at 3.53 GHz. These three frequency bands have good matching input impedance for, S11≤-10 dB. The antenna presents a good performance in terms of radiation pattern, and it is designed, optimized, and miniaturized by using CST-MW whose results are compared with other solvers HFSS and ADS. The results obtained by the use of the three EM solvers are in good agreement. After realization, we have tested and validated this antenna. The measurement results of the antenna present a good agreement with the numerical results.

scholarly journals A 2.45 GHz microstrip antenna with harmonics suppression capability by using defected ground structure

2020 ◽  
Vol 9 (1) ◽  
pp. 387-395
Author(s):  
Shaharil Mohd Shah ◽  
M. Mohamad ◽  
S. A. Hamzah ◽  
Z. Z. Abidin ◽  
F. C. Seman ◽  
...  
Keyword(s):  
Patch Antenna ◽  
Microstrip Antenna ◽  
Ground Plane ◽  
Higher Order ◽  
Microstrip Patch Antenna ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Microstrip Patch ◽  
Tan Δ ◽  
Good Agreement

In this work, a microstrip patch antenna with an inset feed and defected ground structure (DGS) is designed at the resonant frequency of 2.45 GHz. The antenna is designed on a FR-4 substrate with a dielectric constant, εr of 4.5, loss tangent, tan δ of 0.019 and thickness, h of 1.6 mm. The technique of DGS is used to avoid the use of additional circuits in the antenna to suppress the harmonics. By introducing a single and additional slots DGS at both ends on the antenna ground plane, the proposed microstrip patch antenna is able to suppress the higher order harmonics. The reflection coefficient, S11 is -38.75 dB at 2.45 GHz. The proposed antenna have suppressed the higher order harmonics effectively from -38.04 dB to -2.61 dB at 4.54 GHz and from -13.08 dB to -1.38 dB at 5.76 GHz. The prototype of the antenna is fabricated for the verification of the design. The simulated and measured results are found to be in a good agreement.

scholarly journals A Novel Ultrawideband Planar Inverted-F Antenna with Capacitive Ground Plane

2013 ◽  
Vol 2013 ◽  
pp. 1-6
Author(s):  
Haixia Liu ◽  
Fei Wang ◽  
Yang Yang ◽  
Xiaowei Shi ◽  
Long Li
Keyword(s):  
Wireless Communication ◽  
Radiation Pattern ◽  
Free Space ◽  
Input Impedance ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Antenna Performance ◽  
Simulation Results ◽  
Metal Islands ◽  
Good Agreement

With the trend of the miniaturization, broadband, and integration of multisystems of wireless communication terminals, a new ultrawideband planar inverted-F antenna (PIFA) with capacitive ground plane is proposed in this paper. The capacitive ground plane is composed of a sheet of metal islands, which makes a major contribution to ultra-wideband from 2.3 GHz to 9.0 GHz by applying the capacitive compensation for input impedance of the PIFA in high-order modes frequency bands. The effect of geometric parameters of capacitive ground plane and antenna height on antenna performance is analyzed. It is found that the radiation pattern in free space and the gain of the proposed antenna also meet the demands of the wireless communication terminals. The reported antenna was fabricated and measured, and the experimental results are in good agreement with the simulation results.

Input impedance of rectangular patch antenna fed by microstrip line

1992 ◽  
Vol 28 (20) ◽  
pp. 1886 ◽  
Author(s):  
Z. Šipuš ◽  
J. Bartolić ◽  
B. Stipetić
Keyword(s):  
Patch Antenna ◽  
Input Impedance ◽  
Microstrip Line ◽  
Rectangular Patch

scholarly journals A Novel Circular Slotted Microstrip-Fed Patch Antenna with three Triangle Shape Defected Ground Structure for Multiband Applications

2018 ◽  
Vol 7 (3) ◽  
pp. 56-63 ◽  
Author(s):  
A. Jaiswal ◽  
R. K. Sarin ◽  
B. Raj ◽  
S. Sukhija
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Impedance Matching ◽  
Ground Plane ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Resonant Frequencies ◽  
Wireless Applications ◽  
Rectangular Patch ◽  
Miniaturized Antenna

In this paper, a novel circular slotted rectangular patch antenna with three triangle shape Defected Ground Structure (DGS) has been proposed. Radiating patch is made by cutting circular slots of radius 3 mm from the three sides and center of the conventional rectangular patch structure and three triangle shape defects are presented on the ground layer. The size of the proposed antenna is 38 X 25 mm2. Optimization is performed and simulation results have been obtained using Empire XCcel 5.51 software. Thus, a miniaturized antenna is designed which has three impedance bandwidths of 0.957 GHz,  0.779 GHz, 0.665 GHz with resonant frequencies at 3.33 GHz, 6.97 GHz and 8.59 GHz and the corresponding return loss at the three resonant frequencies are -40 dB, -43 dB and -38.71 dB respectively. A prototype is also fabricated and tested. Fine agreement between the measured and simulated results has been obtained. It has been observed that introducing three triangle shape defects on the ground plane results in increased bandwidth, less return loss, good radiation pattern and better impedance matching over the required operating bands which can be used for wireless applications and future 5G applications.

Design of multiband circularly/linearly polarized antenna for multiple wireless (WWAN/Bluetooth/WiMAX/WLAN/Downlink Satellite System)

2019 ◽  
Vol 11 (9) ◽  
pp. 967-974 ◽  
Author(s):  
Manish Sharma
Keyword(s):  
Wireless Communications ◽  
Circular Polarization ◽  
Radiation Pattern ◽  
Linear Polarization ◽  
Ground Plane ◽  
Wireless Systems ◽  
Satellite System ◽  
Multiband Antenna ◽  
Linearly Polarized ◽  
Downlink System

AbstractIn this article, a multiband antenna for various wireless communications is proposed for WWAN, Bluetooth, WiMAX, WLAN, and Downlink satellite system. The antenna consists of a radiating patch and a rectangular ground plane with four L-shaped stubs which are embedded as side arms to obtain a resonating band for WWAN (1.9GHz), Bluetooth (2.4 GHz), WiMAX (2.5, 3.5, and 5.5 GHz), and WLAN (5.5 GHz) wireless systems and a C-shaped stub is etched on the radiating patch to obtain a higher WLAN band (2.4, 5.2, and 5.8 GHz) and a satellite downlink system (7.5 GHz). The proposed antenna exhibits circular polarization at WWAN band and linear polarization for remaining applications. Also, the proposed antenna exhibits an omnidirectional radiation pattern.

Dual-Band Proximity Coupled Feed Microstrip Patch Antenna with ‘T’ Slot on the Radiating Patch and ‘Dumbbell’ Shaped Defected Ground Structure

2016 ◽  
Vol 3 (2) ◽  
pp. 435 ◽  
Author(s):  
Dawit Fitsum ◽  
Dilip Mali ◽  
Mohammed Ismail
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Wireless Applications ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna

<p>This paper presents Dual-Band proximity coupled feed rectangular Microstrip patch antenna with slots on the radiating patch and Defected Ground Structure. Initially a simple proximity coupled feed rectangular Microstrip patch antenna resonating at 2.4 GHz is designed. Etching out a ‘Dumbbell’ shaped defect from the ground plane and ‘T’ shaped slot from the radiating patch of the proximity coupled feed rectangular Microstrip patch antenna, results in a Dual-Band operation, i.e., resonating at 2.4 GHz and 4.5 GHz; with 30.3 % and 18.8% reduction in the overall area of the patch and the ground plane of the reference antenna respectively. The proposed antenna resonates in S-band at frequency of 2.4 GHz with bandwidth of 123.6 MHz and C-band at frequency of 4.5 GHz with bandwidth of 200 MHz, and a very good return loss of -22.1818 dB and -19.0839 dB at resonant frequency of 2.4 GHz and 4.5 GHz respectively is obtained. The proposed antenna is useful for different wireless applications in the S-band and C-band.</p>

MULTIBAND CPW-FED SLOT ANTENNA FOR WLAN/WIMAX APPLICATIONS

2015 ◽  
Vol 77 (10) ◽  
Author(s):  
Igbafe Orikumhi ◽  
Mohamad Rijal Hamid ◽  
Ali Nyangwarimam Obadiah
Keyword(s):  
Radiation Pattern ◽  
Return Loss ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Slot Antenna ◽  
Frequency Range ◽  
Resonant Frequencies ◽  
Good Agreement

A square slot antenna fed by a coplanar waveguide (CPW) is presented in this paper. The design consist of two pairs of “F” shaped planar strips placed within a square slotted ground. The strips are used to excite multiple resonant frequencies, the strips are connected to the ground plane by means of ideal switches. The proposed antenna has achieved multiple resonant frequencies of 2.4/5.2/5.8 GHz for WLAN and 3.5/5.5 for WiMAX applications. The measured results shows a good agreement with the simulated results in terms of return loss, radiation pattern and gain. The proposed antenna is designed for the frequency range of 2 GHz to 7 GHz which makes it suitable for Bluetooth, WLAN and WiMAX applications. 

scholarly journals Performance Comparison of Swastika and Rectangular Shaped Microstrip Patch Antenna

2018 ◽  
Vol 1 (1) ◽  
pp. 11-14
Author(s):  
Suroj Burlakoti ◽  
Prakash Rai
Keyword(s):  
Radiation Pattern ◽  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Performance Comparison ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Patch Antennas ◽  
Microstrip Patch Antennas ◽  
Microstrip Patch

In this paper, Microstrip patch antennas with rectangular and swastika shape of patch are designed and its performance parameters are compared with each other. Rectangular and Swastika shaped patch are considered in this paper with common rectangular ground plane. The antenna is simulated at 2.4 GHz using HFSS simulation software. This work mainly includes modification of antenna patch to improve the antenna parameters. The parameters of antenna such as Return loss, VSWR Bandwidth and radiation pattern are compared using simulation. The performance of Swastika shaped antenna was found to be better than rectangular shaped microstrip patch antenna with improved Return Loss, VSWR, Bandwidth and Radiation Pattern.

scholarly journals A Defected Structure Shaped CPW-Fed Wideband Microstrip Antenna for Wireless Applications

2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
Puneet Khanna ◽  
Amar Sharma ◽  
Kshitij Shinghal ◽  
Arun Kumar
Keyword(s):  
Patch Antenna ◽  
High Frequency ◽  
Microstrip Antenna ◽  
Microstrip Line ◽  
Coplanar Waveguide ◽  
Network Analyzer ◽  
Large Space ◽  
Wireless Applications ◽  
High Frequency Structure Simulator ◽  
Good Agreement

A coplanar waveguide- (CPW-) fed compact wideband defected structure shaped microstrip antenna is proposed for wireless applications. Defected structure is produced by cutting theUshape antenna in the form of two-sided T shape. The proposed antenna consists of two-sidedTshape strip as compared to usual monopole patch antenna for minimizing the height of the antenna. The large space around the radiator is fully utilized as the ground is on the same plane as of radiator. Microstrip line feed is used to excite the proposed antenna placed on an FR4 substrate (dielectric constantεr=4.4). The antenna is practically fabricated and simulated. Simulated results of the proposed antenna have been obtained by using Ansoft High-Frequency Structure Simulator (HFSS) software. These results are compared with measured results by using network analyzer. Measured result shows good agreement with the simulated results. It is observed that the proposed antenna shows a wideband from 2.96 GHz to 7.95 GHz with three bands atf1=3.23 GHz,f2=4.93 GHz, andf3=7.04 GHz.

Sign in / Sign up

Export Citation Format

Share Document