Comparative Wood Anatomy of Southern South American Cupressaceae

IAWA Journal ◽  
1992 ◽  
Vol 13 (2) ◽  
pp. 151-162 ◽  
Author(s):  
Fidel A. Roig
Keyword(s):  
Wood Anatomy ◽  
Parenchyma Cell ◽  
Interspecific Variation ◽  
South American ◽  
Distributional Pattern ◽  
Axial Parenchyma ◽  
Anatomical Features ◽  
Ray Parenchyma ◽  
Comparative Wood Anatomy ◽  
Fitzroya Cupressoides

The wood anatomy is described for the Cupressaceae indigenous to southem South America: Austrocedrus chilensis, Pilgerodendron uviferum and Fitzroya cupressoides. The abundance and distributional pattern of axial parenchyma within each annual ring, height, and the presence or absence of nodules in the end walls of ray parenchyma are all useful anatomical features for distinguishing between the three species. Physical characteristics such as odour and heartwood colour also can be used to separate these species. Axial parenchyma cell length and tracheid length show considerable interspecific variation. Tracheid lengths of Pilgerodendron, but not of Austrocedrus and Fitzroya, decrease with increasing latitude.

Comparative wood anatomy of Eucryphia wilkiei and E. jinksii (Cunoniaceae): two narrow endemics from Queensland, Australia

2004 ◽  
Vol 52 (6) ◽  
pp. 739
Author(s):  
Imogen Poole ◽  
Richard W. Barnes
Keyword(s):  
Wood Anatomy ◽  
South American ◽  
South American Species ◽  
Axial Parenchyma ◽  
Qualitative And Quantitative ◽  
Australian Species ◽  
Anatomical Data ◽  
Narrow Endemics ◽  
Perforation Plates ◽  
Comparative Wood Anatomy

Qualitative and quantitative wood anatomical data are given for two narrow Queensland endemic Eucryphia species, E. wilkiei B.Hyland and Eucryphia jinksii P.I.Forst. Comparisons of wood anatomy of all extant Eucryphia taxa show that E. jinksii and E. wilkiei are distinct from each other, and other Eucryphia species. However, for both species characters relating to perforation plates, helical thickening (E. wilkiei only) and fibres are shared with the South American species, whereas the presence of crystals in the axial parenchyma is shared only with the Australian species. These data suggest that, based on wood anatomy, E. jinksii and E. wilkiei are basal among Australian species.

Wood anatomy of the neotropical liana lineage Paullinia L. (Sapindaceae)

IAWA Journal ◽  
2020 ◽  
Vol 41 (3) ◽  
pp. 278-300
Author(s):  
Joyce G. Chery ◽  
Israel L. da Cunha Neto ◽  
Marcelo R. Pace ◽  
Pedro Acevedo-Rodríguez ◽  
Chelsea D. Specht ◽  
...  
Keyword(s):  
Wood Anatomy ◽  
Functional Anatomy ◽  
Anatomical Study ◽  
Secondary Phloem ◽  
Phylogenetic Constraint ◽  
Axial Parenchyma ◽  
Anatomical Features ◽  
Ray Parenchyma ◽  
Functional Implications ◽  
Cambial Variants

Abstract The liana genus Paullinia L. is one of the most speciose in the neotropics and is unusual in its diversity of stem macromorphologies and cambial conformations. These so-called “vascular cambial variants” are morphologically disparate, evolutionarily labile, and are implicated in injury repair and flexibility. In this study, we explore at the finer scale how wood anatomy translates into functions related to the climbing habit. We present the wood anatomy of Paullinia and discuss the functional implications of key anatomical features. Wood anatomy characters were surveyed for 21 Paullinia species through detailed anatomical study. Paullinia woods have dimorphic vessels, rays of two size classes, and both septate and non-septate fibers. Fibriform vessels, fusiform axial parenchyma, and elements morphologically intermediate between fibers and axial parenchyma were observed. Prismatic crystals are common in the axial and/or ray parenchyma, and laticifers are present in the cortex and/or the early-formed secondary phloem. Some features appear as unique to Paullinia or the Sapindaceae, such as the paucity of axial parenchyma and the abundance of starch storing fibers. Although many features are conserved across the genus, the Paullinia wood anatomy converges on several features of the liana-specific functional anatomy expressed across distantly related lianas, demonstrating an example of convergent evolution. Hence, the conservation of wood anatomy in Paullinia suggests a combination of phylogenetic constraint as a member of Sapindaceae and functional constraint from the liana habit.

Wood Anatomy of Three Lesser Known Species from Mozambique

IAWA Journal ◽  
2009 ◽  
Vol 30 (3) ◽  
pp. 277-291 ◽  
Author(s):  
Ernesto Uetimane Junior ◽  
Nasko Terziev ◽  
Geoffrey Daniel
Keyword(s):  
Wood Species ◽  
Wood Anatomy ◽  
Wood Properties ◽  
Natural Durability ◽  
Ground Tissue ◽  
Anatomical Features ◽  
Ray Parenchyma ◽  
Thin Walled ◽  
Comparative Wood Anatomy ◽  
Diffuse Porous

Three lesser known wood species from Mozambique were studied to generate information for identification purposes and facilitate the introduction of these species into the wood working industry by assigning or widening the potential uses of these species. Selected anatomical features were used to predict some important wood properties, subsequently confirmed by measurements of both density and impregnability. Comparative wood anatomy showed that all three wood species have anatomical features typical for their genus after comparisons with their closest relatives. Both ntholo (Pseudolachnostylis maprounaefolia Pax) and muanga (Pericopsis angolensis Meeuwen) are diffuse-porous (with 14–24 and 16–20 vessels/mm2 respectively), have extractives in the heartwood vessels and thick-walled fibres, features consistent with good natural durability and strength respectively. Metil (Sterculia appendiculata K. Schum.) is also diffuse-porous with very wide vessels at much lower frequency (<5/mm2), it lacks extractives in the heartwood vessels, and thin-walled axial and ray parenchyma constitutes the bulk of the ground tissue. This set of characteristics makes the wood light and satisfactory for construction purposes but highly vulnerable to biodegradation.

Comparative wood anatomy of Juniperus from Macaronesia

IAWA Journal ◽  
2014 ◽  
Vol 35 (2) ◽  
pp. 186-198 ◽  
Author(s):  
Paloma de Palacios ◽  
Luis G. Esteban ◽  
Francisco G. Fernández ◽  
Alberto García-Iruela ◽  
María Conde ◽  
...  
Keyword(s):  
Wood Anatomy ◽  
The Other ◽  
Significance Level ◽  
Axial Parenchyma ◽  
Natural Region ◽  
Ray Parenchyma ◽  
First Time ◽  
Comparative Wood Anatomy ◽  
Representative Samples ◽  
Number Of Cells

The wood anatomy of the three species of Juniperus occurring in Macaronesia is compared for the first time using representative samples of each species collected in its natural region of provenance: J. cedrus Webb & Berthel and J. phoenicea L. var. canariensis Guyot, in the Canary Islands, and J. brevifolia (Seub.) Antoine, in the Azores. The three species are anatomically similar, although some qualitative differences were observed: distribution of axial parenchyma very scarce in J. phoenicea compared with the other two species, presence of crassulae only in J. phoenicea, presence of torus extensions and notches on pit borders in the radial walls of J. brevifolia, and ray parenchyma end walls slightly nodular in J. cedrus as opposed to very nodular in J. phoenicea and J. brevifolia. In addition, the biometry of tracheid pit diameter in the radial walls, ray height in number of cells, and largest and smallest diameters of cross-field pits shows differences for a significance level of 95%.

scholarly journals Comparative Wood Anatomy in Pinaceae with Reference to Its Systematic Position

Forests ◽  
2021 ◽  
Vol 12 (12) ◽  
pp. 1706
Author(s):  
Luis García Esteban ◽  
Paloma de Palacios ◽  
Alberto García-Iruela ◽  
Francisco García-Fernández ◽  
Lydia García-Esteban ◽  
...  
Keyword(s):  
Molecular Phylogeny ◽  
Wood Anatomy ◽  
Systematic Position ◽  
Axial Parenchyma ◽  
The Family ◽  
Parenchyma Cells ◽  
Ray Parenchyma ◽  
Ray Parenchyma Cells ◽  
Resin Canals ◽  
Comparative Wood Anatomy

The wood anatomy of 132 species of the genera Abies, Cathaya, Cedrus, Keteleeria, Larix, Nothotsuga, Picea, Pinus, Pseudolarix, Pseudotsuga and Tsuga was studied to determine the elements that characterise the xylem of each genus and discuss possible groupings by wood anatomy for comparison with clades established by molecular phylogeny. The presence of resin canals and ray tracheids supports the family Pinaceae, although the absence of ray tracheids in Keteleeria and their occasional presence in Abies and Pseudolarix weakens it. Based on wood structure, Pinaceae clearly supports division into two groups, coinciding with molecular phylogeny: Pinoideae (Cathaya-Larix-Picea-Pinus-Pseudotsuga) and Abietoideae (Abies-Cedrus-Keteleeria-Nothotsuga-Pseudolarix-Tsuga). Although differences between genera are slight in Pinoideae, the Abietoideae group presents problems such as the presence of only axial resin canals in Keteleeria and Nothotsuga, absence of ray tracheids in Keteleeria and presence of traumatic radial resin canals in Cedrus. However, other features such as pitted horizontal walls and nodular end walls of ray parenchyma cells, indentures, scarce marginal axial parenchyma and presence of crystals in ray parenchyma strengthen the Abietoideae group.

Wood anatomy of historic French violin bows made of Pernambuco wood

IAWA Journal ◽  
2020 ◽  
Vol 41 (3) ◽  
pp. 320-332
Author(s):  
Tahysa Mota Macedo ◽  
Cecília Gonçalves Costa ◽  
Haroldo Cavalcante de Lima ◽  
Claudia Franca Barros
Keyword(s):  
Wood Anatomy ◽  
Principal Component ◽  
Rio Grande ◽  
Lower Percentage ◽  
High Quality ◽  
String Instruments ◽  
Axial Parenchyma ◽  
Anatomical Features ◽  
19Th And 20Th Century ◽  
Brazilian Northeast

Abstract Paubrasilia echinata is recognized as the best wood in the manufacture of high-quality bows for string instruments. The wood anatomy of five historic French violin bows of the 19th and 20th century made of Pernambuco wood were investigated in order to reveal the wood anatomic features of these historical bows, to determine which P. echinata morphotype (arruda, café or laranja) was used in their manufacture and to identify the state of origin of the wood. Five bow samples were compared to 33 P. echinata specimens from the Brazilian states of Rio de Janeiro, Bahia, Paraíba and Rio Grande do Norte. The wood anatomical features were compared by means of principal component analysis, which revealed the type of axial parenchyma and percentage of tissue to be the most important to sort specimens. The best wood anatomical features previously described for high-quality bows were corroborated here and the bows in general showed similar wood anatomical features. Based on wood anatomy we found that the violin bows were most similar to the samples from the arruda morphotype derived from the States of Paraíba and Rio Grande do Norte by presenting scanty, unilateral and vasicentric axial parenchyma without confluences forming bands, higher percentage of fibres and lower percentage of axial parenchyma. We can therefore suggest that the historical French violin bows studied here were all made of the arruda morphotype from the Brazilian Northeast region helping explain the preference of the French explorers for this region.

WOOD ANATOMY OF MYRCIARIA, NEOMITRANTHES, PLINIA AND SIPHONEUGENA SPECIES (MYRTEAE, MYRTACEAE)

IAWA Journal ◽  
2013 ◽  
Vol 34 (3) ◽  
pp. 313-323 ◽  
Author(s):  
Gabriel U.C.A. Santos ◽  
Cátia H. Callado ◽  
Marcelo da Costa Souza ◽  
Cecilia G. Costa
Keyword(s):  
Wood Anatomy ◽  
Growth Rings ◽  
Anatomical Features ◽  
Bordered Pits ◽  
Parenchyma Cells ◽  
Ray Parenchyma ◽  
Square Cells ◽  
Ray Parenchyma Cells ◽  
Perforation Plates ◽  
Fruit Characters

Myrciaria, Neomitranthes, Plinia and Siphoneugena are closely related genera whose circumscriptions are controversial. The distinctions between Myrciaria vs. Plinia, and Neomitranthes vs. Siphoneugena, have been based on a few fruit characters. The wood anatomy of 24 species of these genera was examined to determine if wood anatomical features could help delimit the genera. It was determined the four genera cannot reliably be separated by wood anatomy alone. Characteristics seen in all four genera are: growth rings usually poorly-defined; diffuse porous; exclusively solitary vessels, usually circular to oval in outline; simple perforation plates; vessel-ray pits alternate and distinctly bordered; fibers with distinctly bordered pits in radial and tangential walls, usually very thickwalled; vasicentric tracheids typically absent; scanty paratracheal parenchyma, sometimes unilateral, and diffuse to diffuse-in-aggregates; chambered crystalliferous axial parenchyma in many species, usually both prismatic and smaller crystals; rays 1–4-seriate, uniseriate rays composed of upright/square cells, multiseriate rays with procumbent body cells and 1 to many marginal rows of upright/square cells; disjunctive ray parenchyma cells usually present.

scholarly journals Comparative wood anatomy of Korean Viburnum L. (Adoxaceae) and its taxonomic implication

PhytoKeys ◽  
2020 ◽  
Vol 156 ◽  
pp. 27-46
Author(s):  
Balkrishna Ghimire ◽  
Dong Chan Son ◽  
Beom Kyun Park ◽  
Seung-Hwan Oh
Keyword(s):  
Light Microscopy ◽  
Cross Section ◽  
Wood Anatomy ◽  
Quantitative Measurement ◽  
Tangential Plane ◽  
Growth Rings ◽  
Axial Parenchyma ◽  
Bordered Pits ◽  
Perforation Plates ◽  
Comparative Wood Anatomy

Comparative wood anatomy of Viburnum was carried out to understand the differences in wood features amongst the species which might be useful for taxonomic discrimination in the genus. Altogether, nine taxa belonging to five clades were investigated using a sliding microtome and light microscopy. The growth rings are well represented and earlywood and latewood are distinguishable in cross-section. Some of the important wood features include angular, oval and rounded vessels with scalariform perforation plates, opposite to scalariform inter-vessel pitting, rounded pits with slit-like apertures, thick-walled xylem tracheids with simple, rounded bordered pits, diffuse axial parenchyma, uni- and multiseriate rays, 2–4 cells wide. In general, there is a remarkable uniformity in the qualitative wood features in Viburnum species, although quantitative measurement showed some disparities. The most significant quantitative wood variables which might be useful for taxonomic groupings of the species comprise a frequency of vessels and rays, the diameter of the vessels and tracheids in the radial and tangential planes and height and width of rays in the tangential plane.

Comparative wood anatomy of Astropanax and Neocussonia, an Afro-Malagasy lineage of Araliaceae

2020 ◽  
Author(s):  
Daiana A Zhernova ◽  
Maya V Nilova ◽  
Alexei A Oskolski
Keyword(s):  
Wood Anatomy ◽  
Average Length ◽  
Interspecific Variation ◽  
Wood Structure ◽  
Rare Occurrence ◽  
Temperature And Precipitation ◽  
Vessel Elements ◽  
Perforation Plates ◽  
Comparative Wood Anatomy ◽  
Different Parts

Abstract Astropanax and Neocussonia are two recently resurrected genera of Araliaceae that had long been considered as an Afro-Malagasy lineage of Schefflera. The wood structure of 11 Neocussonia spp. and eight Astropanax spp. has been studied. Neocussonia shows a higher average length of vessel elements (1319 µm) and number of bars on perforation plates (up to 66) than any other Araliaceae examined to date. Neocussonia is distinct from Astropanax by its smaller diameter and higher frequency of vessels, rare occurrence of simple perforation plates, more numerous bars on scalariform perforation plates and smaller intervessel pits. The interspecific variation in percentage of simple perforation plates, bar number on scalariform perforation plates, vessel frequency and uniseriate ray number is affected by seasonality in temperature and precipitation. The sharp distinction in wood structure between samples of A. abyssinicus from Cameroon and Burundi suggests that the populations from different parts of the disjunct range represent two different species. Our data also suggest that A. goetzenii is an artificial group. Astropanax myrianthus from Madagascar and A. polysciadus from continental Africa, two cryptic species that have long been included in Schefflera myriantha, show significant differences in vessel size and grouping, percentage of simple perforation plates and intervessel pit size.

Wood Anatomical Variation of Acacia Melanoxylon in Relation to Latitude

IAWA Journal ◽  
1989 ◽  
Vol 10 (2) ◽  
pp. 201-207 ◽  
Author(s):  
A. P. Wilkins ◽  
Sabine Papassotiriou
Keyword(s):  
Environmental Conditions ◽  
Wood Anatomy ◽  
Anatomical Variation ◽  
Basic Density ◽  
Vessel Diameter ◽  
Axial Parenchyma ◽  
Anatomical Features ◽  
Acacia Melanoxylon ◽  
Eastern Australia ◽  
Total Proportion

The wood anatomy of Acacia melanoxylon samples from various locations in eastern Australia was examined and a number of characteristics were found to be significantly related to latitude. Vessel member length, proportion of fibres and proportion of multiseriate rays were positively related to latitude. Vessel frequency, vessel diameter and the abundance of crystals were negatively related to latitude as were the proportion of: uniseriate rays, vessels and axial parenchyma. Total proportion of ray tissue and basic density was not found to be associated with latitude.Anatomical features associated with lower transpirational demand appeared to be correlated with the cooler, more xeric environmental conditions accompanying increasing latitude.

Sign in / Sign up

Export Citation Format

Share Document