Summary
Polymer flooding can significantly improve sweep and delay breakthrough of injected water, thereby increasing oil recovery. Polymer viscosity degrades in reservoirs with high-salinity brines, so it is advantageous to inject low-salinity water as a preflush. Low-salinity waterflooding (LSW) can also improve local-displacement efficiency by changing the wettability of the reservoir rock from oil-wet to more water-wet. The mechanism for wettability alteration for LSW in sandstones is not very well-understood; however, experiments and field studies strongly support that cation-exchange (CE) reactions are the key elements in wettability alteration. The complex coupled effects of CE reactions, polymer properties, and multiphase flow and transport have not been explained to date.
This paper presents the first analytical solutions for the coupled synergistic behavior of LSW and polymer flooding considering CE reactions, wettability alteration, adsorption, inaccessible pore volume (IPV), and salinity effects on polymer viscosity. A mechanistic approach that includes the CE of Ca2+, Mg2+, and Na+ is used to model the wettability alteration. The aqueous phase viscosity is a function of polymer and salt concentrations. Then, the coupled multiphase-flow and reactive-transport model is decoupled into three simpler subproblems—the first in which CE reactions are solved, the second in which a variable polymer concentration can be added to the reaction path, and the third in which fractional flows can be mapped onto the fixed cation and polymer-concentration paths. The solutions are used to develop a front-tracking algorithm, which can solve the slug-injection problem of low-salinity water as a preflush followed by polymer. The results are verified with experimental data and PennSim (2013), a general-purpose compositional simulator.
The analytical solutions show that decoupling allows for estimation of key modeling parameters from experimental data, without considering the chemical reactions. Recovery can be significantly enhanced by a low-salinity preflush before polymer injection. For the cases studied, the improved oil recovery (IOR) for a chemically tuned low-salinity polymer (LSP) flood can be as much as 10% original oil in place (OOIP) greater than with considering polymer alone. The results show the structure of the solutions, and, in particular, the velocity of multiple shocks that develop. These shocks can interact, changing recovery. For example, poor recoveries obtained in corefloods for small-slug sizes of low salinity are explained by the intersection of shocks without considering mixing. The solutions can also be used to benchmark numerical solutions and for experimental design. We demonstrate the potential of LSP flooding as a less-expensive and more-effective way for performing polymer flooding when the reservoir wettability can be altered with chemically tuned low-salinity brine.
Numerical Simulation of the Combined Effects of Low Salinity Water and Alkaline-Surfactant-Polymer Flooding
