scholarly journals An Evaluation of MÉRA, a High-Resolution Mesoscale Regional Reanalysis

2018 ◽  
Vol 57 (9) ◽  
pp. 2179-2196 ◽  
Author(s):  
Eoin Whelan ◽  
Emily Gleeson ◽  
John Hanley
Keyword(s):  
High Resolution ◽  
Data Assimilation ◽  
Numerical Weather Prediction ◽  
Weather Prediction ◽  
Regional Climate ◽  
Prediction System ◽  
High Quality ◽  
Regional Reanalysis ◽  
Horizontal Grid ◽  
Very High

AbstractMet Éireann, the Irish Meteorological Service, has generated a very high resolution (2.5-km horizontal grid) regional climate reanalysis for Ireland called the Met Éireann Reanalysis (MÉRA). MÉRA spans the period from 1981 to 2015 and was produced using the shared ALADIN–HIRLAM numerical weather prediction system. This article includes comparisons with the ERA-Interim and Uncertainties in Ensembles of Regional Reanalyses (UERRA) datasets, analysis of data assimilation outputs, precipitation comparisons, and a focus on extremes of wind and rainfall. The comparisons with the reanalysis datasets show that MÉRA provides a high-quality reconstruction of recent Irish climate and benefits from the use of a very high resolution grid, in particular in relation to wind and precipitation extremes.

scholarly journals Assessment of Doppler Radar Radial Wind Observation Quality from Different Echo Sources for Assimilation during the Sydney 2014 Forecast Demonstration Project

2018 ◽  
Vol 35 (8) ◽  
pp. 1605-1620 ◽  
Author(s):  
Susan Rennie ◽  
Peter Steinle ◽  
Alan Seed ◽  
Mark Curtis ◽  
Yi Xiao
Keyword(s):  
Quality Control ◽  
Control System ◽  
Statistical Analysis ◽  
High Resolution ◽  
Radial Velocity ◽  
Numerical Weather Prediction ◽  
Doppler Radar ◽  
Weather Prediction ◽  
Demonstration Project ◽  
Prediction System

AbstractA new quality control system, primarily using a naïve Bayesian classifier, has been developed to enable the assimilation of radial velocity observations from Doppler radar. The ultimate assessment of this system is the assimilation of observations in a pseudo-operational numerical weather prediction system during the Sydney 2014 Forecast Demonstration Project. A statistical analysis of the observations assimilated during this period provides an assessment of the data quality. This will influence how observations will be assimilated in the future, and what quality control and errors are applicable. This study compares observation-minus-background statistics for radial velocities from precipitation and insect echoes. The results show that with the applied level of quality control, these echo types have comparable biases. With the latest quality control, the clear air observations of wind are apparently of similar quality to those from precipitation and are therefore suitable for use in high-resolution NWP assimilation systems.

Physics, Resolution and Data Assimilation: Making sense of Greenland climate and ice sheet Surface Mass Balance with HARMONIE Climate

2021 ◽  
Author(s):  
Ruth Mottram ◽  
Oskar Landgren ◽  
Rasmus Anker Pedersen ◽  
Kristian Pagh Nielsen ◽  
Ole Bøssing Christensen ◽  
...  
Keyword(s):  
High Resolution ◽  
Data Assimilation ◽  
Numerical Weather Prediction ◽  
Climate Model ◽  
Weather Prediction ◽  
Ice Sheet ◽  
Greenland Ice Sheet ◽  
Surface Mass ◽  
Mass Budget ◽  
Numerical Weather

<p>The development of the HARMONIE model system has led to huge advances in numerical weather prediction, including over Greenland where a numerical weather prediction (NWP) model is used to forecast daily surface mass budget over the Greenland ice sheet as presented on polarportal.dk. The new high resolution Copernicus Arctic Reanalysis further developed the possibilities in HARMONIE with full 3DVar data assimilation and extended use of quality-controlled local observations. Here, we discuss the development and current status of the climate version of the HARMONIE Climate model (HCLIM). The HCLIM system has opened up the possibility for flexible use of the model at a range of spatial scales using different physical schemes including HARMONIE-AROME, ALADIN and ALARO for different spatial and temporal resolutions and assimilating observations, including satellite data on sea ice concentration from ESA CCI+, to improve hindcasts. However, the range of possibilities means that documenting the effects of different physics and parameterisation schemes is important before widespread application. </p><p>Here, we focus on HCLIM performance over the Greenland ice sheet, using observations to verify the different plausible set-ups and investigate biases in climate model outputs that affect the surface mass budget (SMB) of the Greenland ice sheet. </p><p>The recently funded Horizon 2020 project PolarRES will use the HCLIM model for very high resolution regional downscaling, together with other regional climate models in both Arctic and Antarctic regions, and our analysis thus helps to optimise the use of HCLIM in the polar regions for different modelling purposes.</p>

scholarly journals Assessment of valley cold pools and clouds in a very high-resolution numerical weather prediction model

2015 ◽  
Vol 8 (10) ◽  
pp. 3105-3117 ◽  
Author(s):  
J. K. Hughes ◽  
A. N. Ross ◽  
S. B. Vosper ◽  
A. P. Lock ◽  
B. C. Jemmett-Smith
Keyword(s):  
High Resolution ◽  
Relative Humidity ◽  
Numerical Weather Prediction ◽  
Weather Prediction ◽  
Wave Radiation ◽  
Cold Pool ◽  
Cold Air ◽  
Numerical Weather ◽  
Pool Formation ◽  
Very High

Abstract. The formation of cold air pools in valleys under stable conditions represents an important challenge for numerical weather prediction (NWP). The challenge is increased when the valleys that dominate cold pool formation are on scales unresolved by NWP models, which can lead to substantial local errors in temperature forecasts. In this study a 2-month simulation is presented using a nested model configuration with a finest horizontal grid spacing of 100 m. The simulation is compared with observations from the recent COLd air Pooling Experiment (COLPEX) project and the model's ability to represent cold pool formation, and the surface energy balance is assessed. The results reveal a bias in the model long-wave radiation that results from the assumptions made about the sub-grid variability in humidity in the cloud parametrization scheme. The cloud scheme assumes relative humidity thresholds below 100 % to diagnose partial cloudiness, an approach common to schemes used in many other models. The biases in radiation, and resulting biases in screen temperature and cold pool properties are shown to be sensitive to the choice of critical relative humidity, suggesting that this is a key area that should be improved for very high-resolution modeling.

scholarly journals The ALADIN System and its canonical model configurations AROME CY41T1 and ALARO CY40T1

2018 ◽  
Vol 11 (1) ◽  
pp. 257-281 ◽  
Author(s):  
Piet Termonia ◽  
Claude Fischer ◽  
Eric Bazile ◽  
François Bouyssel ◽  
Radmila Brožková ◽  
...  
Keyword(s):  
High Resolution ◽  
Data Assimilation ◽  
Numerical Weather Prediction ◽  
Weather Forecasting ◽  
Weather Prediction ◽  
Forecast Model ◽  
Canonical Model ◽  
Limited Area ◽  
Climate Simulations ◽  
Process Studies

Abstract. The ALADIN System is a numerical weather prediction (NWP) system developed by the international ALADIN consortium for operational weather forecasting and research purposes. It is based on a code that is shared with the global model IFS of the ECMWF and the ARPEGE model of Météo-France. Today, this system can be used to provide a multitude of high-resolution limited-area model (LAM) configurations. A few configurations are thoroughly validated and prepared to be used for the operational weather forecasting in the 16 partner institutes of this consortium. These configurations are called the ALADIN canonical model configurations (CMCs). There are currently three CMCs: the ALADIN baseline CMC, the AROME CMC and the ALARO CMC. Other configurations are possible for research, such as process studies and climate simulations. The purpose of this paper is (i) to define the ALADIN System in relation to the global counterparts IFS and ARPEGE, (ii) to explain the notion of the CMCs, (iii) to document their most recent versions, and (iv) to illustrate the process of the validation and the porting of these configurations to the operational forecast suites of the partner institutes of the ALADIN consortium. This paper is restricted to the forecast model only; data assimilation techniques and postprocessing techniques are part of the ALADIN System but they are not discussed here.

scholarly journals Screen-level non-GTS data assimilation in a limited-area mesoscale model

2010 ◽  
Vol 10 (6) ◽  
pp. 1129-1149 ◽  
Author(s):  
M. Milelli ◽  
M. Turco ◽  
E. Oberto
Keyword(s):  
Boundary Layer ◽  
High Resolution ◽  
Data Assimilation ◽  
Planetary Boundary Layer ◽  
Prediction Models ◽  
Mesoscale Model ◽  
Positive Impact ◽  
Weather Prediction ◽  
Limited Area ◽  
Very High

Abstract. The forecast in areas of very complex topography, as for instance the Alpine region, is still a challenge even for the new generation of numerical weather prediction models which aim at reaching the km-scale. The problem is enhanced by a general lack of standard observations, which is even more evident over the southern side of the Alps. For this reason, it would be useful to increase the performance of the mathematical models by locally assimilating non-conventional data. Since in ARPA Piemonte there is the availability of a great number of non-GTS stations, it has been decided to assimilate the 2 m temperature, coming from this dataset, in the very-high resolution version of the COSMO model, which has a horizontal resolution of about 3 km, more similar to the average resolution of the thermometers. Four different weather situations have been considered, ranging from spring to winter, from cloudy to clear sky. The aim of the work is to investigate the effects of the assimilation of non-GTS data in order to create an operational very high-resolution analysis, but also to test the option of running in the future a very short-range forecast starting from these analyses (RUC or Rapid Update Cycle). The results, in terms of Root Mean Square Error, Mean Error and diurnal cycle of some surface variables such as 2 m temperature, 2 m relative humidity and 10 m wind intensity show a positive impact during the assimilation cycle which tends to dissipate a few hours after the end of it. Moreover, the 2 m temperature assimilation has a slightly positive or neutral impact on the vertical profiles of temperature, eventhough some calibration is needed for the precipitation field which is too much perturbed during the assimilation cycle, while it is unaffected in the forecast period. So the stability of the planetary boundary layer, on the one hand, has not been particularly improved by the new-data assimilation, but, on the other hand, it has not been destroyed. It has to be pointed out that a correct description of the planetary boundary layer, even only the lowest part of it, could be helpful to the forecasters and, in general, to the users, in order to deal with meteorological hazards such as snow (in particular snow/rain limit definition), or fog (description of temperature inversions).

scholarly journals The ALADIN System and its Canonical Model Configurations AROME CY41T1 and ALARO CY40T1

2017 ◽  
Author(s):  
Piet Termonia ◽  
Claude Fischer ◽  
Eric Bazile ◽  
François Bouyssel ◽  
Radmila Brožková ◽  
...  
Keyword(s):  
High Resolution ◽  
Numerical Weather Prediction ◽  
Weather Forecasting ◽  
Weather Prediction ◽  
Forecast Model ◽  
Canonical Model ◽  
Limited Area ◽  
Prediction System ◽  
Climate Simulations ◽  
Process Studies

Abstract. The ALADIN System is a numerical weather prediction system (NWP) developed by the international ALADIN consortium for operational weather forecasting and research purposes. It is based on a code that is shared with the global model IFS of the ECMWF and the ARPEGE model of Météo-France. Today, this system can be used to provide a multitude of high-resolution limited-area model (LAM) configurations. A few configurations are thoroughly validated and prepared to be used for the operational weather forecasting in the 16 Partner Institutes of this consortium. These configurations are called the ALADIN Canonical Model Configurations (CMCs). There are currently three CMCs: the ALADIN baseline-CMC, the AROME CMC and the ALARO CMC. Other configurations are possible for research, such as process studies and climate simulations. The purpose of this paper is (i) to define the ALADIN System in relation to the global counterparts IFS and ARPEGE, (ii) to explain the notion of the CMCs and to document their most recent versions, and (iii) to illustrate the process of the validation and the porting of these configurations to the operational forecast suites of the Partner Institutes of the ALADIN consortium. This paper is restricted to the forecast model only; data assimilation techniques and postprocessing techniques are part of the ALADIN System but they are not discussed here.

Sign in / Sign up

Export Citation Format

Share Document