scholarly journals The Roles of Asymmetric Inflow Forcing Induced by Outer Rainbands in Tropical Cyclone Secondary Eyewall Formation

2013 ◽  
Vol 70 (3) ◽  
pp. 953-974 ◽  
Author(s):  
Xin Qiu ◽  
Zhe-Min Tan
Keyword(s):  
Boundary Layer ◽  
Tropical Cyclone ◽  
Early Phase ◽  
Inner Core ◽  
Deep Convection ◽  
Leading Edge ◽  
Three Dimensions ◽  
Secondary Eyewall Formation ◽  
Layer Flow ◽  
The Impact

Abstract This study analyzes the secondary eyewall formation (SEF) process in an idealized cloud-resolving simulation of a tropical cyclone. In particular, the unbalanced boundary layer response to asymmetric inflow forcing induced by outer rainbands (ORBs) is examined in order to understand the mechanisms driving the sustained convection outside the primary eyewall during the early phase of SEF. The enhancement of convection in the SEF region follows the formation and inward contraction of an ORB. The azimuthal distribution of the enhanced convection is highly asymmetric but regular, generally along a half circle starting from the downwind portion of the ORB. It turns out that the descending radial inflow in the middle and downwind portions of the ORB initiates/maintains a strong inflow in the boundary layer. The latter is able to penetrate into the inner-core region, sharpens the gradient of radial velocity, and reinforces convergence. Consequently, warm and moist air is continuously lifted up at the leading edge of the strong inflow to support deep convection. Moreover, the inflow from the ORB creates strong supergradient winds that are ejected outward downwind, thereby enhancing convergence and convection on the other side of the storm. The results provide new insight into the key processes responsible for convection enhancement during the early phase of SEF in three dimensions and suggest the limitations of axisymmetric studies. There are also implications regarding the impact of the asymmetric boundary layer flow under a translating storm on SEF.

scholarly journals A High-Resolution Simulation of Asymmetries in Severe Southern Hemisphere Tropical Cyclone Larry (2006)

2009 ◽  
Vol 137 (12) ◽  
pp. 4171-4187 ◽  
Author(s):  
Hamish A. Ramsay ◽  
Lance M. Leslie ◽  
Jeffrey D. Kepert
Keyword(s):  
Boundary Layer ◽  
Tropical Cyclone ◽  
Southern Hemisphere ◽  
Inner Core ◽  
Mesoscale Model ◽  
Deep Convection ◽  
Vertical Motion ◽  
Vertical Shear ◽  
Low Level ◽  
Frictional Convergence

Abstract Advances in observations, theory, and modeling have revealed that inner-core asymmetries are a common feature of tropical cyclones (TCs). In this study, the inner-core asymmetries of a severe Southern Hemisphere tropical cyclone, TC Larry (2006), are investigated using the fifth-generation Pennsylvania State University–National Center for Atmospheric Research Mesoscale Model (MM5) and the Kepert–Wang boundary layer model. The MM5-simulated TC exhibited significant asymmetries in the inner-core region, including rainfall distribution, surface convergence, and low-level vertical motion. The near-core environment was characterized by very low environmental vertical shear and consequently the TC vortex had almost no vertical tilt. It was found that, prior to landfall, the rainfall asymmetry was very pronounced with precipitation maxima consistently to the right of the westward direction of motion. Persistent maxima in low-level convergence and vertical motion formed ahead of the translating TC, resulting in deep convection and associated hydrometeor maxima at about 500 hPa. The asymmetry in frictional convergence was mainly due to the storm motion at the eyewall, but was dominated by the proximity to land at larger radii. The displacement of about 30°–120° of azimuth between the surface and midlevel hydrometeor maxima is explained by the rapid cyclonic advection of hydrometeors by the tangential winds in the TC core. These results for TC Larry support earlier studies that show that frictional convergence in the boundary layer can play a significant role in determining the asymmetrical structures, particularly when the environmental vertical shear is weak or absent.

Impact of Parameterized Boundary Layer Structure on Tropical Cyclone Rapid Intensification Forecasts in HWRF

2017 ◽  
Vol 145 (4) ◽  
pp. 1413-1426 ◽  
Author(s):  
Jun A. Zhang ◽  
Robert F. Rogers ◽  
Vijay Tallapragada
Keyword(s):  
Boundary Layer ◽  
Tropical Cyclone ◽  
Inner Core ◽  
Layer Structure ◽  
Intensity Change ◽  
Rapid Intensification ◽  
Near Surface ◽  
Boundary Layer Structure ◽  
Tangential Wind ◽  
The Impact

Abstract This study evaluates the impact of the modification of the vertical eddy diffusivity (Km) in the boundary layer parameterization of the Hurricane Weather Research and Forecasting (HWRF) Model on forecasts of tropical cyclone (TC) rapid intensification (RI). Composites of HWRF forecasts of Hurricanes Earl (2010) and Karl (2010) were compared for two versions of the planetary boundary layer (PBL) scheme in HWRF. The results show that using a smaller value of Km, in better agreement with observations, improves RI forecasts. The composite-mean, inner-core structures for the two sets of runs at the time of RI onset are compared with observational, theoretical, and modeling studies of RI to determine why the runs with reduced Km are more likely to undergo RI. It is found that the forecasts with reduced Km at the RI onset have a shallower boundary layer with stronger inflow, more unstable near-surface air outside the eyewall, stronger and deeper updrafts in regions farther inward from the radius of maximum wind (RMW), and stronger boundary layer convergence closer to the storm center, although the mean storm intensity (as measured by the 10-m winds) is similar for the two groups. Finally, it is found that the departure of the maximum tangential wind from the gradient wind at the eyewall, and the inward advection of angular momentum outside the eyewall, is much larger in the forecasts with reduced Km. This study emphasizes the important role of the boundary layer structure and dynamics in TC intensity change, supporting recent studies emphasizing boundary layer spinup mechanism, and recommends further improvement to the HWRF PBL physics.

Experimental study of heat transfer in the boundary layer of a flat plate with the impact of weak shock waves on the leading edge

2020 ◽  
Author(s):  
V. L. Kocharin ◽  
A. A. Yatskikh ◽  
D. S. Prishchepova ◽  
A. V. Panina ◽  
Yu. G. Yermolaev ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Experimental Study ◽  
Shock Waves ◽  
Flat Plate ◽  
Leading Edge ◽  
Weak Shock ◽  
The Impact

scholarly journals Recent Advances in Our Understanding of Tropical Cyclone Intensity Change Processes from Airborne Observations

Atmosphere ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 650
Author(s):  
Robert F. Rogers
Keyword(s):  
Tropical Cyclone ◽  
Inner Core ◽  
Vertical Shear ◽  
Intensity Change ◽  
Change Processes ◽  
Cyclone Intensity ◽  
Secondary Eyewall Formation ◽  
Warm Core ◽  
Major Hurricane ◽  
Upper Level

Recent (past ~15 years) advances in our understanding of tropical cyclone (TC) intensity change processes using aircraft data are summarized here. The focus covers a variety of spatiotemporal scales, regions of the TC inner core, and stages of the TC lifecycle, from preformation to major hurricane status. Topics covered include (1) characterizing TC structure and its relationship to intensity change; (2) TC intensification in vertical shear; (3) planetary boundary layer (PBL) processes and air–sea interaction; (4) upper-level warm core structure and evolution; (5) genesis and development of weak TCs; and (6) secondary eyewall formation/eyewall replacement cycles (SEF/ERC). Gaps in our airborne observational capabilities are discussed, as are new observing technologies to address these gaps and future directions for airborne TC intensity change research.

scholarly journals Revisiting the Balanced and Unbalanced Aspects of Tropical Cyclone Intensification

2017 ◽  
Vol 74 (8) ◽  
pp. 2575-2591 ◽  
Author(s):  
Junyao Heng ◽  
Yuqing Wang ◽  
Weican Zhou
Keyword(s):  
Boundary Layer ◽  
Tropical Cyclone ◽  
Inner Core ◽  
Model Simulation ◽  
Surface Friction ◽  
Core Region ◽  
Physics Model ◽  
The One ◽  
Balanced Dynamics ◽  
Balanced Solution

Abstract The balanced and unbalanced aspects of tropical cyclone (TC) intensification are revisited with the balanced contribution diagnosed with the outputs from a full-physics model simulation of a TC using the Sawyer–Eliassen (SE) equation. The results show that the balanced dynamics can well capture the secondary circulation in the full-physics model simulation even in the inner-core region in the boundary layer. The balanced dynamics can largely explain the intensification of the simulated TC. The unbalanced dynamics mainly acts to prevent the boundary layer agradient flow in the inner-core region from further intensification. Although surface friction can enhance the boundary layer inflow and make the inflow penetrate more inward into the eye region, contributing to the eyewall contraction, the net dynamical effect of surface friction on TC intensification is negative. The sensitivity of the balanced solution to the procedure used to ensure the ellipticity condition for the SE equation is also examined. The results show that the boundary layer inflow in the balanced response is very sensitive to the adjustment to inertial stability in the upper troposphere and the calculation of radial wind at the surface with relatively coarse vertical resolution in the balanced solution. Both the use of the so-called global regularization and the one-sided finite-differencing scheme used to calculate the surface radial wind in the balanced solution as utilized in some previous studies can significantly underestimate the boundary layer inflow. This explains why the boundary layer inflow in the balanced response is too weak in some previous studies.

Keel Design for Low Viscous Drag

1987 ◽  
Author(s):  
Clifford J. Obara ◽  
C. P. van Dam
Keyword(s):  
Boundary Layer ◽  
Laminar Flow ◽  
Laminar Boundary Layer ◽  
Leading Edge ◽  
Boundary Layer Transition ◽  
Viscous Drag ◽  
Hydrodynamic Characteristics ◽  
Sweep Angle ◽  
Layer Transition ◽  
Layer Flow

In this paper, foil and planform parameters which govern the level of viscous drag produced by the keel of a sailing yacht are discussed. It is shown that the application of laminar boundary-Layer flow offers great potential for increased boat speed resulting from the reduction in viscous drag. Three foil shapes have been designed and it is shown that their hydro­dynamic characteristics are very much dependent on location and mode of boundary-Layer transition. The planform parameter which strongly affects the capabilities of the keel to achieve laminar flow is lea ding-edge sweep angle. The two significant phenomena related to keel sweep angle which can cause premature transition of the laminar boundary layer are crossflow instability and turbulent contamination of the leading-edge attachment line. These flow phenomena and methods to control them are discussed in detail. The remaining factors that affect the maintainability of laminar flow include surface roughness, surface waviness, and freestream turbulence. Recommended limits for these factors are given to insure achievability of laminar flow on the keel. In addition, the application of a simple trailing-edge flap to improve the hydrodynamic characteristics of a foil at moderate-to-high leeway angles is studied.

scholarly journals Dynamics of the Intertropical Convergence Zone of the East Pacific

2006 ◽  
Vol 63 (2) ◽  
pp. 582-597 ◽  
Author(s):  
David J. Raymond ◽  
Christopher S. Bretherton ◽  
John Molinari
Keyword(s):  
Boundary Layer ◽  
Boundary Layer Flow ◽  
Deep Convection ◽  
Intertropical Convergence Zone ◽  
Surface Fluxes ◽  
Balance Model ◽  
Convergence Zone ◽  
East Pacific ◽  
Layer Flow ◽  
Sst Gradient

Abstract The dynamical factors controlling the mean state and variability of the east Pacific intertropical convergence zone (ITCZ) and the associated cross-equatorial boundary layer flow are investigated using observations from the East Pacific Investigation of Climate (EPIC2001) project. The tropical east Pacific exhibits a southerly boundary layer flow that terminates in the ITCZ. This flow is induced by the strong meridional sea surface temperature (SST) gradient in the region. Away from the equator and from deep convection, it is reasonably well described on a day-to-day basis by an extended Ekman balance model. Variability in the strength and northward extent of this flow is caused by variations in free-tropospheric pressure gradients that either reinforce or oppose the pressure gradient associated with the SST gradient. These free-tropospheric gradients are caused by easterly waves, tropical cyclones, and the Madden–Julian oscillation. Convergence in the boundary layer flow is often assumed to be responsible for destabilizing the atmosphere to deep convection. An alternative hypothesis is that enhanced total surface heat fluxes associated with high SSTs and strong winds act to produce the necessary destabilization. Analysis of the moist entropy budget of the planetary boundary layer shows that, on average, surface fluxes generate over twice the destabilization produced by boundary layer convergence in the east Pacific ITCZ.

scholarly journals Impact of environmental moisture on tropical cyclone intensification

2015 ◽  
Vol 15 (11) ◽  
pp. 16111-16139 ◽  
Author(s):  
L. Wu ◽  
H. Su ◽  
R. G. Fovell ◽  
T. J. Dunkerton ◽  
Z. Wang ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Tropical Cyclone ◽  
Inner Core ◽  
Wrf Model ◽  
Weather Research And Forecasting ◽  
Convective Activity ◽  
Dry Air ◽  
Moving Storm ◽  
Lagrangian Boundary ◽  
Moisture Increase

Abstract. The impacts of environmental moisture on the intensification of a tropical cyclone (TC) are investigated in the Weather Research and Forecasting (WRF) model, with a focus on the azimuthal asymmetry of the moisture impacts. A series of sensitivity experiments with varying moisture perturbations in the environment are conducted and the Marsupial Paradigm framework is employed to understand the different moisture impacts. We find that modification of environmental moisture has insignificant impacts on the storm in this case unless it leads to convective activity in the environment, which deforms the quasi-Lagrangian boundary of the storm. By facilitating convection and precipitation outside the storm, enhanced environmental moisture ahead of the northwestward-moving storm induces a dry air intrusion to the inner core and limits TC intensification. However, increased moisture in the rear quadrants favors intensification by providing more moisture to the inner core and promoting storm symmetry, with primary contributions coming from moisture increase in the boundary layer. The different impacts of environmental moisture on TC intensification are governed by the relative locations of moisture perturbations and their interactions with the storm Lagrangian structure.

scholarly journals An Idealized Numerical Study of Shear-Relative Low-Level Mean Flow on Tropical Cyclone Intensity and Size

2019 ◽  
Vol 76 (8) ◽  
pp. 2309-2334 ◽  
Author(s):  
Buo-Fu Chen ◽  
Christopher A. Davis ◽  
Ying-Hwa Kuo
Keyword(s):  
Boundary Layer ◽  
Tropical Cyclone ◽  
Inner Core ◽  
Numerical Study ◽  
Vertical Wind Shear ◽  
Development Stage ◽  
Surface Fluxes ◽  
Mean Flow ◽  
Low Level ◽  
Core Convection

Abstract Given comparable background vertical wind shear (VWS) magnitudes, the initially imposed shear-relative low-level mean flow (LMF) is hypothesized to modify the structure and convective features of a tropical cyclone (TC). This study uses idealized Weather Research and Forecasting Model simulations to examine TC structure and convection affected by various LMFs directed toward eight shear-relative orientations. The simulated TC affected by an initially imposed LMF directed toward downshear left yields an anomalously high intensification rate, while an upshear-right LMF yields a relatively high expansion rate. These two shear-relative LMF orientations affect the asymmetry of both surface fluxes and frictional inflow in the boundary layer and thus modify the TC convection. During the early development stage, the initially imposed downshear-left LMF promotes inner-core convection because of high boundary layer moisture fluxes into the inner core and is thus favorable for TC intensification because of large radial fluxes of azimuthal mean vorticity near the radius of maximum wind in the boundary layer. However, TCs affected by various LMFs may modify the near-TC VWS differently, making the intensity evolution afterward more complicated. The TC with a fast-established eyewall in response to the downshear-left LMF further reduces the near-TC VWS, maintaining a relatively high intensification rate. For the upshear-right LMF that leads to active and sustained rainbands in the downshear quadrants, TC size expansion is promoted by a positive radial flux of eddy vorticity near the radius of 34-kt wind (1 kt ≈ 0.51 m s−1) because the vorticity associated with the rainbands is in phase with the storm-motion-relative inflow.

The Evolution of Streamwise Counter-Rotating Vortices in Flat Plate Boundary Layer With Leading Edge Pattern

2015 ◽  
Author(s):  
Seyed Mohammad Hasheminejad ◽  
Hatsari Mitsudharmadi ◽  
S. H. Winoto ◽  
Kim Boon Lua ◽  
Hong Tong Low
Keyword(s):  
Boundary Layer ◽  
Flat Plate ◽  
Plate Boundary ◽  
Leading Edge ◽  
Streamwise Vortex ◽  
Streamwise Velocity ◽  
Stream Velocity ◽  
Hot Wire ◽  
Layer Flow ◽  
Different Characteristics

The evolution of streamwise counter-rotating vortices induced by different leading edge patterns is investigated quantitatively using hot-wire anemometer. A notched and triangular leading edge with the same wavelength and amplitude were designed to induce streamwise vortices over a flat plate at Reynolds number (based on the wavelength of the leading edge patterns) of 3080 corresponding to free-stream velocity of 3 m/s. The streamwise velocity at different streamwise locations collected and analyzed using a single wire probe hot-wire anemometer showed reveal different characteristics of boundary layer flow due to the presence of these two leading edge patterns. The major difference is the appearance of an additional streamwise vortex between the troughs of the notched pattern. Such vortices increase the mixing effect in the boundary layer as well as the velocity profile.

Sign in / Sign up

Export Citation Format

Share Document