scholarly journals Changing Lateral Boundary Conditions for Probable Maximum Precipitation Studies: A Physically Consistent Approach

2021 ◽  
Vol 22 (1) ◽  
pp. 113-123
Author(s):  
Karianne Ødemark ◽  
Malte Müller ◽  
Ole Einar Tveito
Keyword(s):  
Boundary Conditions ◽  
Extreme Precipitation ◽  
Moisture Transport ◽  
Extreme Event ◽  
New Method ◽  
Precipitation Event ◽  
Lateral Boundary ◽  
Probable Maximum Precipitation ◽  
Maximum Precipitation ◽  
Lateral Boundary Conditions

AbstractThis article presents a conceptual study toward establishing a new method for altering lateral boundary conditions in numerical model based estimates for probable maximum precipitation (PMP). We altered an extreme event in a physically and dynamically consistent way in a regional convective-scale weather prediction model (AROME-MetCoOp) by applying fields from a global ensemble climate model approach based on EC-EARTH. Ten ensemble members are downscaled with the regional model, which results in 10 different realizations of an extreme precipitation event for the west coast of Norway. We show how the position and orientation of the moisture flow is different between the individual ensemble members, which leads to relatively large changes in precipitation values for a selected catchment. For example, the modification of the moisture transport on scales of several hundred kilometers impacts the extreme precipitation amount by about 75% among the model members. Compared with historical rainfall records, precipitation changes of 62% and 71% are found for two selected catchments. Although the present study is restricted to one particular extreme event that is modified 10 times with the ensemble approach, there is a considerable spread of the moisture transport compared to the spread of the moisture transport of extreme precipitation events of the past 40 years. We conclude that the described approach is a step toward a new method to derive PMP values for a given catchment; however, a larger amount of events and larger ensembles would have to be considered to estimate PMP values.

scholarly journals Advanced error diagnostics of the CMAQ and Chimere modelling systems within the AQMEII3 model evaluation framework

2017 ◽  
Author(s):  
Efisio Solazzo ◽  
Christian Hogrefe ◽  
Augustin Colette ◽  
Marta Garcia-Vivanco ◽  
Stefano Galmarini
Keyword(s):  
Wind Speed ◽  
North America ◽  
Boundary Conditions ◽  
Time Scale ◽  
Model Evaluation ◽  
Evaluation Framework ◽  
Diagnostic Methods ◽  
Base Case ◽  
Lateral Boundary ◽  
Lateral Boundary Conditions

Abstract. The work here complements the overview analysis of the modelling systems participating in the third phase of the Air Quality Model Evaluation International Initiative (AQMEII3) by focusing on the performance for hourly surface ozone by two modelling systems, Chimere for Europe and CMAQ for North America. The evaluation strategy outlined in the course of the three phases of the AQMEII activity, aimed to build up a diagnostic methodology for model evaluation, is pursued here and novel diagnostic methods are proposed. In addition to evaluating the base case simulation in which all model components are configured in their standard mode, the analysis also makes use of sensitivity simulations in which the models have been applied by altering and/or zeroing lateral boundary conditions, emissions of anthropogenic precursors, and ozone dry deposition. To help understand of the causes of model deficiencies, the error components (bias, variance, and covariance) of the base case and of the sensitivity runs are analysed in conjunction with time-scale considerations and error modelling using the available error fields of temperature, wind speed, and NOx concentration. The results reveal the effectiveness and diagnostic power of the methods devised (which remains the main scope of this study), allowing the detection of the time scale and the fields that the two models are most sensitive to. The representation of planetary boundary layers (PBL) dynamics is pivotal to both models. In particular: i) The fluctuations slower than −1.5 days account for 70–85 % of the total ozone quadratic error; ii) A recursive, systematic error with daily periodicity is detected, responsible for 10–20 % of the quadratic total error; iii) Errors in representing the timing of the daily transition between stability regimes in the PBL are responsible for a covariance error as large as 9 ppb (as much as the standard deviation of the network-average ozone observations in summer in both Europe and North America); iv) The CMAQ ozone error has a weak/negligible dependence on the errors in NO2 and wind speed, while the error in NO2 significantly impacts the ozone error produced by Chimere; v) On a continent wide monitoring network-average, a zeroing out of anthropogenic emissions produces an error increase of 45 % (25 %) during summer and of 56 % (null) during winter for Chimere (CMAQ), while a zeroing out of lateral boundary conditions results in an ozone error increase of 30 % during summer and of 180 % during winter (CMAQ).

scholarly journals Lateral boundary conditions for a local anisotropic ice-flow model

2002 ◽  
Vol 35 ◽  
pp. 503-509 ◽  
Author(s):  
Olivier Gagliardini ◽  
Jacques Meyssonnier
Keyword(s):  
Boundary Conditions ◽  
Flow Model ◽  
Ice Sheet ◽  
Lateral Boundary ◽  
Local Flow ◽  
Ice Flow ◽  
Lateral Boundary Conditions ◽  
Potential Applications ◽  
Two Dimensional Flow ◽  
Spatial Domains

AbstractA local two-dimensional flow model which accounts for the anisotropic behaviour of polar ice and the evolution of its strain-induced anisotropy is briefly reviewed. Due to its complexity, it is not yet possible to use this model to simulate the flow of a whole ice sheet, and its potential applications are presently restricted to limited spatial domains around existing drilling sites. In order to calculate the local flow of ice, boundary conditions must be applied on the lateral edges of the studied domain. Since these limits correspond to fictitious sections of the ice sheet, the type of boundary condition to adopt is not obvious. In the present paper, different kinds of boundary conditions of the Dirichlet type, applied at the lateral boundary of an idealized ice sheet of simplified geometry, are discussed. This will serve as a first step towards the coupling of the local flow model with a global ice-sheet flow model.

Evaluation of the new high resolution unstructured grid Marmara Sea model

2021 ◽  
Author(s):  
Mehmet Ilicak ◽  
Ivan Federico ◽  
Ivano Barletta ◽  
Nadia Pinardi ◽  
Stefania Angela Ciliberti ◽  
...  
Keyword(s):  
High Resolution ◽  
Boundary Conditions ◽  
Black Sea ◽  
Mixed Layer ◽  
Unstructured Grid ◽  
The Black Sea ◽  
Marmara Sea ◽  
Lateral Boundary ◽  
Lateral Boundary Conditions ◽  
Forecasting System

<p>Marmara Sea including Bosphorus and Dardanelles Straits (i.e. Turkish Strait Systems, TSS) is the connection between the Black Sea and the Mediterranean. The exchange flow that occurs in the Straits is crucial to set the deep water properties in the Black Sea and the surface water conditions in the Northern Aegean Sea. We have developed a new high-resolution unstructured grid model (U-TSS) for the Marmara Sea including the Bosporus and Dardanelles Straits using the System of HydrodYnamic Finite Element Modules (SHYFEM). Using an unstructured grid in the horizontal better resolves geometry of the Turkish Straits. The new model has a resolution between 500 meter in the deep to 50 meter in the shallow areas, and 93 geopotential coordinate levels in the vertical. We conducted a 4 year hindcast simulation between 2016 and 2019 using lateral boundary conditions from CMEMS (https://marine.copernicus.eu/) analysis, in particular Black Sea Forecasting System (BS-FS) for the northern boundary and Mediterranean Sea Forecasting System (MS-FS) for the southern boundary. Atmospheric boundary conditions fare from the ECMWF dataset.</p><p>Mean averaged surface circulation shows that there is a cyclonic gyre in the middle of the basin due to Bosphorus jet flowing to the south and turning to west after reaching the southern Marmara coast. The U-TSS model has been validated against the seasonal in situ observations obtained from four different cruises between 2017 and 2018. The maximum bias occurs at around halocline depth between 20 to 30 meters.  We also found that root mean square error field is higher in the mixed layer interface. We conclude that capturing shallow mixed layer depth is very in the Marmara Sea due to the interplay of air-sea fluxes and mixing parametrizations uncertainties. Maximum salinity bias and rms in the new U-TSS model are around 3 psu which is a significant improvement with respect to previous studies. This new model will be used as an operational forecasting system and will provide lateral boundary conditions for the BS-FS and MS-FS models in the future.</p>

Sensitivity of forecast errors to initial and lateral boundary conditions

1998 ◽  
Vol 50 (2) ◽  
pp. 167-185 ◽  
Author(s):  
Nils Gustafsson ◽  
Erland Källén ◽  
Sigurdur Thorsteinsson
Keyword(s):  
Boundary Conditions ◽  
Forecast Errors ◽  
Lateral Boundary ◽  
Lateral Boundary Conditions

scholarly journals Synoptic-scale conditions and convection-resolving hindcast experiments of a cold-season derecho on 3 January 2014 in western Europe

2019 ◽  
Vol 19 (5) ◽  
pp. 1023-1040 ◽  
Author(s):  
Luca Mathias ◽  
Patrick Ludwig ◽  
Joaquim G. Pinto
Keyword(s):  
Boundary Conditions ◽  
Surface Pressure ◽  
Large Scale ◽  
Vertical Wind Shear ◽  
Mesoscale Convective System ◽  
Cold Season ◽  
Limited Area ◽  
Convective System ◽  
Lateral Boundary ◽  
Lateral Boundary Conditions

Abstract. A major linear mesoscale convective system caused severe weather over northern France, Belgium, the Netherlands and northwestern Germany on 3 January 2014. The storm was classified as a cold-season derecho with widespread wind gusts exceeding 25 m s−1. While such derechos occasionally develop along cold fronts of extratropical cyclones, this system formed in a postfrontal air mass along a baroclinic surface pressure trough and was favoured by a strong large-scale air ascent induced by an intense mid-level jet. The lower-tropospheric environment was characterised by weak latent instability and strong vertical wind shear. Given the poor operational forecast of the storm, we analyse the role of initial and lateral boundary conditions to the storm's development by performing convection-resolving limited-area simulations with operational analysis and reanalysis datasets. The storm is best represented in simulations with high temporally and spatially resolved initial and lateral boundary conditions derived from ERA5, which provide the most realistic development of the essential surface pressure trough. Moreover, simulations at convection-resolving resolution enable a better representation of the observed derecho intensity. This case study is testimony to the usefulness of ensembles of convection-resolving simulations in overcoming the current shortcomings of forecasting cold-season convective storms, particularly for cases not associated with a cold front.

scholarly journals Regional data assimilation of multi-spectral MOPITT observations of CO over North America

2015 ◽  
Vol 15 (12) ◽  
pp. 6801-6814 ◽  
Author(s):  
Z. Jiang ◽  
D. B. A. Jones ◽  
J. Worden ◽  
H. M. Worden ◽  
D. K. Henze ◽  
...  
Keyword(s):  
High Resolution ◽  
Data Assimilation ◽  
Boundary Conditions ◽  
North American ◽  
A Priori ◽  
Sensitivity Analyses ◽  
Small Scale ◽  
Lateral Boundary ◽  
Free Troposphere ◽  
Lateral Boundary Conditions

Abstract. Chemical transport models (CTMs) driven with high-resolution meteorological fields can better resolve small-scale processes, such as frontal lifting or deep convection, and thus improve the simulation and emission estimates of tropospheric trace gases. In this work, we explore the use of the GEOS-Chem four-dimensional variational (4D-Var) data assimilation system with the nested high-resolution version of the model (0.5° × 0.67°) to quantify North American CO emissions during the period of June 2004–May 2005. With optimized lateral boundary conditions, regional inversion analyses can reduce the sensitivity of the CO source estimates to errors in long-range transport and in the distributions of the hydroxyl radical (OH), the main sink for CO. To further limit the potential impact of discrepancies in chemical aging of air in the free troposphere, associated with errors in OH, we use surface-level multispectral MOPITT (Measurement of Pollution in The Troposphere) CO retrievals, which have greater sensitivity to CO near the surface and reduced sensitivity in the free troposphere, compared to previous versions of the retrievals. We estimate that the annual total anthropogenic CO emission from the contiguous US 48 states was 97 Tg CO, a 14 % increase from the 85 Tg CO in the a priori. This increase is mainly due to enhanced emissions around the Great Lakes region and along the west coast, relative to the a priori. Sensitivity analyses using different OH fields and lateral boundary conditions suggest a possible error, associated with local North American OH distribution, in these emission estimates of 20 % during summer 2004, when the CO lifetime is short. This 20 % OH-related error is 50 % smaller than the OH-related error previously estimated for North American CO emissions using a global inversion analysis. We believe that reducing this OH-related error further will require integrating additional observations to provide a strong constraint on the CO distribution across the domain. Despite these limitations, our results show the potential advantages of combining high-resolution regional inversion analyses with global analyses to better quantify regional CO source estimates.

Sign in / Sign up

Export Citation Format

Share Document