scholarly journals Dynamical Potential Energy: A New Approach to Ocean Energetics

2013 ◽  
Vol 43 (2) ◽  
pp. 457-476 ◽  
Author(s):  
Fabien Roquet

Abstract The concept of available potential energy is supposed to indicate which part of the potential energy is available to transform into kinetic energy. Yet it is impossible to obtain a unique definition of available potential energy for the real ocean because of nonlinearities of the equation of state, rendering its usefulness largely hypothetical. In this paper, the conservation of energy is first reformulated in terms of horizontal anomalies of density and pressure for a simplified ocean model using the Boussinesq and hydrostatic approximations. This framework introduces the concept of “dynamical potential energy,” defined as the horizontal anomaly of potential energy, to replace available potential energy. Modified conservation equations are derived that make it much simpler to identify oceanic power input by buoyancy and mechanical forces. Closed budgets of energy are presented for idealized circulations obtained with a general circulation model, comparing spatial patterns of power inputs generated by wind and thermal forcings. Finally, a generalization of the framework to compressible fluids is presented, opening the way to applications in atmosphere energetics.

2008 ◽  
Vol 21 (22) ◽  
pp. 5797-5806 ◽  
Author(s):  
Paul A. O’Gorman ◽  
Tapio Schneider

Abstract As the climate changes, changes in static stability, meridional temperature gradients, and availability of moisture for latent heat release may exert competing effects on the energy of midlatitude transient eddies. This paper examines how the eddy kinetic energy in midlatitude baroclinic zones responds to changes in radiative forcing in simulations with an idealized moist general circulation model. In a series of simulations in which the optical thickness of the longwave absorber is varied over a wide range, the eddy kinetic energy has a maximum for a climate with mean temperature similar to that of present-day earth, with significantly smaller values both for warmer and for colder climates. In a series of simulations in which the meridional insolation gradient is varied, the eddy kinetic energy increases monotonically with insolation gradient. In both series of simulations, the eddy kinetic energy scales approximately linearly with the dry mean available potential energy averaged over the baroclinic zones. Changes in eddy kinetic energy can therefore be related to the changes in the atmospheric thermal structure that affect the mean available potential energy.


2021 ◽  
Author(s):  
Moritz Kreuzer ◽  
Ronja Reese ◽  
Willem Huiskamp ◽  
Stefan Petri ◽  
Torsten Albrecht ◽  
...  

<p>The past and future evolution of the Antarctic Ice Sheet is largely controlled by interactions between the ocean and floating ice shelves. To investigate these interactions, coupled ocean and ice sheet model configurations are required. Previous modelling studies have mostly relied on high resolution configurations, limiting these studies to individual glaciers or regions over short time scales of decades to a few centuries. To study global and long term interactions, we developed a framework to couple the dynamic ice sheet model PISM with the global ocean general circulation model MOM5 via the ice-shelf cavity module PICO. Since ice-shelf cavities are not resolved by MOM5, but parameterized with the box model PICO, the framework allows the ice sheet and ocean model to be run at resolution of 16 km and 3 degrees, respectively. We present first results from our coupled setup and discuss stability, feedbacks, and interactions of the Antarctic Ice Sheet and the global ocean system on millennial time scales.</p>


2019 ◽  
Vol 49 (5) ◽  
pp. 1141-1157 ◽  
Author(s):  
Patrick Wagner ◽  
Siren Rühs ◽  
Franziska U. Schwarzkopf ◽  
Inga Monika Koszalka ◽  
Arne Biastoch

AbstractTo model tracer spreading in the ocean, Lagrangian simulations in an offline framework are a practical and efficient alternative to solving the advective–diffusive tracer equations online. Differences in both approaches raise the question of whether both methods are comparable. Lagrangian simulations usually use model output averaged in time, and trajectories are not subject to parameterized subgrid diffusion, which is included in the advection–diffusion equations of ocean models. Previous studies focused on diffusivity estimates in idealized models but could show that both methods yield similar results as long as the deformations-scale dynamics are resolved and a sufficient amount of Lagrangian particles is used. This study compares spreading of an Eulerian tracer simulated online and a cloud of Lagrangian particles simulated offline with velocities from the same ocean model. We use a global, eddy-resolving ocean model featuring 1/20° horizontal resolution in the Agulhas region around South Africa. Tracer and particles were released at one time step in the Cape Basin and below the mixed layer and integrated for 3 years. Large-scale diagnostics, like mean pathways of floats and tracer, are almost identical and 1D horizontal distributions show no significant differences. Differences in vertical distributions, seen in a reduced vertical spreading and downward displacement of particles, are due to the combined effect of unresolved subdaily variability of the vertical velocities and the spatial variation of vertical diffusivity. This, in turn, has a small impact on the horizontal spreading behavior. The estimates of eddy diffusivity from particles and tracer yield comparable results of about 4000 m2 s−1 in the Cape Basin.


2020 ◽  
Author(s):  
Remi Tailleux ◽  
Bethan Harris ◽  
Christopher Holloway ◽  
Pier-Luigi Vidale

<p>While it is well accepted that tropical cyclones (TCs) derive their energy from surface enthalpy fluxes over the ocean, there is still little understanding of the precise causes and effects by which the latter ends up as TC vortex kinetic energy. For example, Potential Intensity (PI) theory, which has been so far the main framework for predicting TC intensities, assumes a balance between the Carnot power input and the kinetic energy dissipated by surface friction, but says nothing of the detailed physical processes linking the two. A similar criticism pertains to the WISHE (Wind Induced Surface Heat Exchange) theory. To achieve a causal theory of TC intensification, the main difficulty is in linking the power input to kinetic energy production, rather than kinetic energy dissipation. Because kinetic energy is produced at the expense of available potential energy (APE), APE theory is arguably the most promising candidate framework for achieving a causal theory of TC intensification. However, in its current form, the usefulness of APE theory appears to be limited in a number of ways because of its reliance on a notional reference state of rest. First, APE production associated with standard reference states (i.e., horizontally averaged density field, density field of initial sounding, adiabatically sorted states, ...) is usually found to systematically overestimate the kinetic energy actually produced in ideal TC simulations, similarly as the Carnot theory of heat engines; moreover, the standard APE is only connected to vertical buoyancy forces, but says nothing of the radial forces required to drive the secondary circulation. To address these shortcomings, this work presents a new theory of available energy (AE) that is based on the use of an axisymmetric vortex reference state in gradient wind balance. This theory possesses the following advantages over previous frameworks:</p><p> </p><ul><li>The available energy (AE) thus constructed possesses both a mechanical and thermodynamic component. The thermodynamic component is analogous to the well-known Slantwise Convective Available Potential Energy (SCAPE), whereas the mechanical component is proportional to the anomalous azimuthal kinetic energy;</li> <li>The rate of AE production by surface enthalpy fluxes is found to be a very accurate predictor of the amount of potential energy actually converted into kinetic energy in idealised TC simulations based on the Rotunno and Emanuel (1986) axisymmetric model, although a few exceptions are found for cold SSTs;</li> <li>In addition to the expected thermodynamic efficiencies, the production term for AE also involves mechanical efficiencies predicting the fraction of the sinks/sources of angular momentum creating/destroying AE;</li> <li>The AE is related to a generalised buoyancy/inertial force that has both vertical and horizontal components; at low levels, such a generalised force has radially inward and vertically upward components, as required to drive the expected secondary circulation.</li> </ul><p>The new theory, therefore, appears to possess all the ingredients to form the basis for a causal theory of TC intensification.</p>


2012 ◽  
Vol 69 (9) ◽  
pp. 2718-2732 ◽  
Author(s):  
C. A. F. Marques ◽  
J. M. Castanheira

Abstract An energetics formulation is here introduced that enables an explicit evaluation for the conversion rates between available potential energy and kinetic energy, the nonlinear interactions of both energy forms, and their generation and dissipation rates, in both the zonal wavenumber and vertical mode domains. The conversion rates between available potential energy and kinetic energy are further decomposed into the contributions by the rotational (Rossby) and divergent (gravity) components of the circulation field. The computed energy terms allow one to formulate a detailed energy cycle describing the flow of energy among the zonal mean and eddy components, and also among the barotropic and baroclinic components. This new energetics formulation is a development of the 3D normal-mode energetics scheme. The new formulation is applied on an assessment of the energetics of winter (December–February) circulation in the 40-yr ECMWF Re-Analysis (ERA-40), the 25-yr Japan Meteorological Agency Reanalysis (JRA-25), and the NCEP–Department of Energy Reanalysis 2 (NCEP-R2) datasets.


2009 ◽  
Vol 22 (20) ◽  
pp. 5421-5432 ◽  
Author(s):  
Duncan Ackerley ◽  
Eleanor J. Highwood ◽  
David J. Frame ◽  
Ben B. B. Booth

Abstract A large ensemble of general circulation model (GCM) integrations coupled to a fully interactive sulfur cycle scheme were run on the climateprediction.net platform to investigate the uncertainty in the climate response to sulfate aerosol and carbon dioxide (CO2) forcing. The sulfate burden within the model (and the atmosphere) depends on the balance between formation processes and deposition (wet and dry). The wet removal processes for sulfate aerosol are much faster than dry removal and so any changes in atmospheric circulation, cloud cover, and precipitation will feed back on the sulfate burden. When CO2 is doubled in the Hadley Centre Slab Ocean Model (HadSM3), global mean precipitation increased by 5%; however, the global mean sulfate burden increased by 10%. Despite the global mean increase in precipitation, there were large areas of the model showing decreases in precipitation (and cloud cover) in the Northern Hemisphere during June–August, which reduced wet deposition and allowed the sulfate burden to increase. Further experiments were also undertaken with and without doubling CO2 while including a future anthropogenic sulfur emissions scenario. Doubling CO2 further enhanced the increases in sulfate burden associated with increased anthropogenic sulfur emissions as observed in the doubled CO2-only experiment. The implications are that the climate response to doubling CO2 can influence the amount of sulfate within the atmosphere and, despite increases in global mean precipitation, may act to increase it.


2005 ◽  
Vol 18 (13) ◽  
pp. 2199-2221 ◽  
Author(s):  
Monica Y. Stephens ◽  
Robert J. Oglesby ◽  
Martin Maxey

Abstract A study has been made of the dynamic interactions between the surface layer of the ocean and the atmosphere using a climate model that contains a new approach to predicting the sea surface temperature (SST). The atmospheric conditions are simulated numerically with the NCAR Community Climate Model (CCM3). The SST is determined by a modified Kraus–Turner-type one-dimensional mixed layer ocean model (MLOM) for the upper ocean that has been coupled to CCM3. The MLOM simulates vertical ocean dynamics and demonstrates the effects of the seasonal variation of mixed layer depth and convective instability on the SST. A purely thermodynamic slab ocean model (SOM) is currently available for use with CCM3 to predict the SST. A large-scale ocean general circulation model (OGCM) may also be coupled to CCM3; however, the OGCM is computationally intensive and is therefore not a good tool for conducting multiple sensitivity studies. The MLOM provides an alternative to the SOM that contains seasonally and spatially specified mixed layer depths. The SOM also contains a heat flux correction called Q-flux that crudely accounts for ocean heat transport by artificially specifying a heat flux that forces the SOM to replicate the observed SST. The results of the coupled MLOM–CCM3 reveal that the MLOM may be used on a global scale and can therefore replace the standard coupled SOM–CCM3 that contains no explicit ocean dynamics. Additionally, stand-alone experiments of the MLOM that are forced with realistic winds, heat, and moisture fluxes show that the MLOM closely approximates the observed seasonal cycle of SST.


2021 ◽  
Vol 14 (5) ◽  
pp. 2781-2799
Author(s):  
Pengfei Wang ◽  
Jinrong Jiang ◽  
Pengfei Lin ◽  
Mengrong Ding ◽  
Junlin Wei ◽  
...  

Abstract. A high-resolution (1/20∘) global ocean general circulation model with graphics processing unit (GPU) code implementations is developed based on the LASG/IAP Climate System Ocean Model version 3 (LICOM3) under a heterogeneous-compute interface for portability (HIP) framework. The dynamic core and physics package of LICOM3 are both ported to the GPU, and three-dimensional parallelization (also partitioned in the vertical direction) is applied. The HIP version of LICOM3 (LICOM3-HIP) is 42 times faster than the same number of CPU cores when 384 AMD GPUs and CPU cores are used. LICOM3-HIP has excellent scalability; it can still obtain a speedup of more than 4 on 9216 GPUs compared to 384 GPUs. In this phase, we successfully performed a test of 1/20∘ LICOM3-HIP using 6550 nodes and 26 200 GPUs, and on a large scale, the model's speed was increased to approximately 2.72 simulated years per day (SYPD). By putting almost all the computation processes inside GPUs, the time cost of data transfer between CPUs and GPUs was reduced, resulting in high performance. Simultaneously, a 14-year spin-up integration following phase 2 of the Ocean Model Intercomparison Project (OMIP-2) protocol of surface forcing was performed, and preliminary results were evaluated. We found that the model results had little difference from the CPU version. Further comparison with observations and lower-resolution LICOM3 results suggests that the 1/20∘ LICOM3-HIP can reproduce the observations and produce many smaller-scale activities, such as submesoscale eddies and frontal-scale structures.


Sign in / Sign up

Export Citation Format

Share Document