scholarly journals Geostationary Enhanced Temporal Interpolation for CERES Flux Products

2013 ◽  
Vol 30 (6) ◽  
pp. 1072-1090 ◽  
Author(s):  
David R. Doelling ◽  
Norman G. Loeb ◽  
Dennis F. Keyes ◽  
Michele L. Nordeen ◽  
Daniel Morstad ◽  
...  
Keyword(s):  
Global Climate ◽  
Radiant Energy ◽  
Energy System ◽  
Radiation Budget ◽  
Cloud Properties ◽  
Marine Stratus ◽  
Temporal Interpolation ◽  
Moderate Resolution ◽  
Moderate Resolution Imaging Spectroradiometer ◽  
Observation Times

Abstract The Clouds and the Earth’s Radiant Energy System (CERES) instruments on board the Terra and Aqua spacecraft continue to provide an unprecedented global climate record of the earth’s top-of-atmosphere (TOA) energy budget since March 2000. A critical step in determining accurate daily averaged flux involves estimating the flux between CERES Terra or Aqua overpass times. CERES employs the CERES-only (CO) and the CERES geostationary (CG) temporal interpolation methods. The CO method assumes that the cloud properties at the time of the CERES observation remain constant and that it only accounts for changes in albedo with solar zenith angle and diurnal land heating, by assuming a shape for unresolved changes in the diurnal cycle. The CG method enhances the CERES data by explicitly accounting for changes in cloud and radiation between CERES observation times using 3-hourly imager data from five geostationary (GEO) satellites. To maintain calibration traceability, GEO radiances are calibrated against Moderate Resolution Imaging Spectroradiometer (MODIS) and the derived GEO fluxes are normalized to the CERES measurements. While the regional (1° latitude × 1° longitude) monthly-mean difference between the CG and CO methods can exceed 25 W m−2 over marine stratus and land convection, these regional biases nearly cancel in the global mean. The regional monthly CG shortwave (SW) and longwave (LW) flux uncertainty is reduced by 20%, whereas the daily uncertainty is reduced by 50% and 20%, respectively, over the CO method, based on comparisons with 15-min Geostationary Earth Radiation Budget (GERB) data.

scholarly journals A Supplementary Clear-Sky Snow and Ice Recognition Technique for CERES Level 2 Products

2013 ◽  
Vol 30 (3) ◽  
pp. 557-568 ◽  
Author(s):  
Alexander Radkevich ◽  
Konstantin Khlopenkov ◽  
David Rutan ◽  
Seiji Kato
Keyword(s):  
Confidence Intervals ◽  
Radiant Energy ◽  
Energy System ◽  
Radiation Budget ◽  
Data Series ◽  
Clear Sky ◽  
Multiple Thresholds ◽  
Moderate Resolution ◽  
Moderate Resolution Imaging Spectroradiometer ◽  
Snow And Ice

Abstract Identification of clear-sky snow and ice is an important step in the production of cryosphere radiation budget products, which are used in the derivation of long-term data series for climate research. In this paper, a new method of clear-sky snow/ice identification for Moderate Resolution Imaging Spectroradiometer (MODIS) is presented. The algorithm’s goal is to enhance the identification of snow and ice within the Clouds and the Earth’s Radiant Energy System (CERES) data after application of the standard CERES scene identification scheme. The input of the algorithm uses spectral radiances from five MODIS bands and surface skin temperature available in the CERES Single Scanner Footprint (SSF) product. The algorithm produces a cryosphere rating from an aggregated test: a higher rating corresponds to a more certain identification of the clear-sky snow/ice-covered scene. Empirical analysis of regions of interest representing distinctive targets such as snow, ice, ice and water clouds, open waters, and snow-free land selected from a number of MODIS images shows that the cryosphere rating of snow/ice targets falls into 95% confidence intervals lying above the same confidence intervals of all other targets. This enables recognition of clear-sky cryosphere by using a single threshold applied to the rating, which makes this technique different from traditional branching techniques based on multiple thresholds. Limited tests show that the established threshold clearly separates the cryosphere rating values computed for the cryosphere from those computed for noncryosphere scenes, whereas individual tests applied consequently cannot reliably identify the cryosphere for complex scenes.

scholarly journals Clouds and the Earth’s Radiant Energy System (CERES) FluxByCldTyp Edition 4 Data Product

2022 ◽  
Keyword(s):  
Radiative Transfer ◽  
Radiant Energy ◽  
Energy System ◽  
Cloud Type ◽  
Radiative Transfer Models ◽  
Cloud Properties ◽  
Moderate Resolution ◽  
Resolution Imaging ◽  
Moderate Resolution Imaging Spectroradiometer ◽  
Transfer Models

Abstract The Clouds and the Earth’s Radiant Energy System (CERES) project has provided the climate community 20 years of globally observed top of the atmosphere (TOA) fluxes critical for climate and cloud feedback studies. The CERES Flux By Cloud Type (FBCT) product contains radiative fluxes by cloud-type, which can provide more stringent constraints when validating models and also reveal more insight into the interactions between clouds and climate. The FBCT product provides 1° regional daily and monthly shortwave (SW) and longwave (LW) cloud-type fluxes and cloud properties sorted by 7 pressure layers and 6 optical depth bins. Historically, cloud-type fluxes have been computed using radiative transfer models based on observed cloud properties. Instead of relying on radiative transfer models, the FBCT product utilizes Moderate Resolution Imaging Spectroradiometer (MODIS) radiances partitioned by cloud-type within a CERES footprint to estimate the cloud-type broadband fluxes. The MODIS multi-channel derived broadband fluxes were compared with the CERES observed footprint fluxes and were found to be within 1% and 2.5% for LW and SW, respectively, as well as being mostly free of cloud property dependencies. These biases are mitigated by constraining the cloud-type fluxes within each footprint with the CERES Single Scanner Footprint (SSF) observed flux. The FBCT all-sky and clear-sky monthly averaged fluxes were found to be consistent with the CERES SSF1deg product. Several examples of FBCT data are presented to highlight its utility for scientific applications.

scholarly journals The Climate Monitoring SAF Outgoing Longwave Radiation from AVHRR

2020 ◽  
Vol 12 (6) ◽  
pp. 929 ◽  
Author(s):  
Nicolas Clerbaux ◽  
Tom Akkermans ◽  
Edward Baudrez ◽  
Almudena Velazquez Blazquez ◽  
William Moutier ◽  
...  
Keyword(s):  
Outgoing Longwave Radiation ◽  
Radiant Energy ◽  
Longwave Radiation ◽  
Energy System ◽  
Radiation Budget ◽  
Climate Data ◽  
Night Time ◽  
Cloud Properties ◽  
Climate Monitoring ◽  
Orbital Drift

Data from the Advanced Very High Resolution Radiometer (AVHRR) have been used to create several long-duration data records of geophysical variables describing the atmosphere and land and water surfaces. In the Climate Monitoring Satellite Application Facility (CM SAF) project, AVHRR data are used to derive the Cloud, Albedo, and Radiation (CLARA) climate data records of radiation components (i.a., surface albedo) and cloud properties (i.a., cloud cover). This work describes the methodology implemented for the additional estimation of the Outgoing Longwave Radiation (OLR), an important Earth radiation budget component, that is consistent with the other CLARA variables. A first step is the estimation of the instantaneous OLR from the AVHRR observations. This is done by regressions on a large database of collocated observations between AVHRR Channel 4 (10.8 µm) and 5 (12 µm) and the OLR from the Clouds and Earth’s Radiant Energy System (CERES) instruments. We investigate the applicability of this method to the first generation of AVHRR instrument (AVHRR/1) for which no Channel 5 observation is available. A second step concerns the estimation of daily and monthly OLR from the instantaneous AVHRR overpasses. This step is especially important given the changes in the local time of the observations due to the orbital drift of the NOAA satellites. We investigate the use of OLR in the ERA5 reanalysis to estimate the diurnal variation. The developed approach proves to be valuable to model the diurnal change in OLR due to day/night time warming/cooling over clear land. Finally, the resulting monthly mean AVHRR OLR product is intercompared with the CERES monthly mean product. For a typical configuration with one morning and one afternoon AVHRR observation, the Root Mean Square (RMS) difference with CERES monthly mean OLR is about 2 Wm−2 at 1° × 1° resolution. We quantify the degradation of the OLR product when only one AVHRR instrument is available (as is the case for some periods in the 1980s) and also the improvement when more instruments are available (e.g., using METOP-A, NOAA-15, NOAA-18, and NOAA-19 in 2012). The degradation of the OLR product from AVHRR/1 instruments is also quantified, which is done by “masking” the Channel 5 observations.

scholarly journals Evaluation of Five Satellite Top-of-Atmosphere Albedo Products over Land

2019 ◽  
Vol 11 (24) ◽  
pp. 2919
Author(s):  
Chuan Zhan ◽  
Richard P. Allan ◽  
Shunlin Liang ◽  
Dongdong Wang ◽  
Zhen Song
Keyword(s):  
High Latitude ◽  
Radiant Energy ◽  
Energy System ◽  
Moderate Resolution ◽  
Resolution Imaging ◽  
Moderate Resolution Imaging Spectroradiometer ◽  
Regional Product ◽  
Changes Over Time ◽  
Year 2000 ◽  
Energy Pathways

Five satellite top-of-atmosphere (TOA) albedo products over land were evaluated in this study including global products from the Advanced Very High Resolution Radiometer (AVHRR) (TAL-AVHRR), Moderate Resolution Imaging Spectroradiometer (MODIS) (TAL-MODIS), and Clouds and the Earth’s Radiant Energy System (CERES); one regional product from the Climate Monitoring Satellite Application Facility (CM SAF); and one harmonized product termed Diagnosing Earth’s Energy Pathways in the Climate system (DEEP-C). Results showed that overall, there is good consistency among these five products, particularly after the year 2000. The differences among these products in the high-latitude regions were relatively larger. The percentage differences among TAL-AVHRR, TAL-MODIS, and CERES were generally less than 20%, while the differences between TAL-AVHRR and DEEP-C before 2000 were much larger. Except for the obvious decrease in the differences after 2000, the differences did not show significant changes over time, but varied among different regions. The differences between TAL-AVHRR and the other products were relatively large in the high-latitude regions of North America, Asia, and the Maritime Continent, while the differences between DEEP-C and CM SAF in Europe and Africa were smaller. Interannual variability was consistent between products after 2000, before which the differences among the three products were much larger.

scholarly journals Angular Distribution Models for Top-of-Atmosphere Radiative Flux Estimation from the Clouds and the Earth’s Radiant Energy System Instrument on the Terra Satellite. Part I: Methodology

2005 ◽  
Vol 22 (4) ◽  
pp. 338-351 ◽  
Author(s):  
Norman G. Loeb ◽  
Seiji Kato ◽  
Konstantin Loukachine ◽  
Natividad Manalo-Smith
Keyword(s):  
Angular Distribution ◽  
Radiant Energy ◽  
Tropical Rainfall Measuring Mission ◽  
Energy System ◽  
Distribution Models ◽  
Radiative Fluxes ◽  
Earth Observing System ◽  
Moderate Resolution ◽  
Moderate Resolution Imaging Spectroradiometer ◽  
Terra Satellite

Abstract The Clouds and Earth’s Radiant Energy System (CERES) provides coincident global cloud and aerosol properties together with reflected solar, emitted terrestrial longwave, and infrared window radiative fluxes. These data are needed to improve the understanding and modeling of the interaction between clouds, aerosols, and radiation at the top of the atmosphere, surface, and within the atmosphere. This paper describes the approach used to estimate top-of-atmosphere (TOA) radiative fluxes from instantaneous CERES radiance measurements on the Terra satellite. A key component involves the development of empirical angular distribution models (ADMs) that account for the angular dependence of the earth’s radiation field at the TOA. The CERES Terra ADMs are developed using 24 months of CERES radiances, coincident cloud and aerosol retrievals from the Moderate Resolution Imaging Spectroradiometer (MODIS), and meteorological parameters from the Global Modeling and Assimilation Office (GMAO)’s Goddard Earth Observing System (GEOS) Data Assimilation System (DAS) V4.0.3 product. Scene information for the ADMs is from MODIS retrievals and GEOS DAS V4.0.3 properties over the ocean, land, desert, and snow for both clear and cloudy conditions. Because the CERES Terra ADMs are global, and far more CERES data are available on Terra than were available from CERES on the Tropical Rainfall Measuring Mission (TRMM), the methodology used to define CERES Terra ADMs is different in many respects from that used to develop CERES TRMM ADMs, particularly over snow/sea ice, under cloudy conditions, and for clear scenes over land and desert.

scholarly journals CERES Synoptic Product: Methodology and Validation of Surface Radiant Flux

2015 ◽  
Vol 32 (6) ◽  
pp. 1121-1143 ◽  
Author(s):  
David A. Rutan ◽  
Seiji Kato ◽  
David R. Doelling ◽  
Fred G. Rose ◽  
Le Trang Nguyen ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Diurnal Cycle ◽  
Radiant Energy ◽  
Energy System ◽  
Surface Fluxes ◽  
Radiant Flux ◽  
Earth Observing System ◽  
Cloud Properties ◽  
Moderate Resolution Imaging Spectroradiometer ◽  
Surface Observations

AbstractThe Clouds and the Earth’s Radiant Energy System Synoptic (SYN1deg), edition 3, product provides climate-quality global 3-hourly 1° × 1°gridded top of atmosphere, in-atmosphere, and surface radiant fluxes. The in-atmosphere surface fluxes are computed hourly using a radiative transfer code based upon inputs from Terra and Aqua Moderate Resolution Imaging Spectroradiometer (MODIS), 3-hourly geostationary (GEO) data, and meteorological assimilation data from the Goddard Earth Observing System. The GEO visible and infrared imager calibration is tied to MODIS to ensure uniform MODIS-like cloud properties across all satellite cloud datasets. Computed surface radiant fluxes are compared to surface observations at 85 globally distributed land (37) and ocean buoy (48) sites as well as several other publicly available global surface radiant flux data products. Computed monthly mean downward fluxes from SYN1deg have a bias (standard deviation) of 3.0 W m−2 (5.7%) for shortwave and −4.0 W m−2 (2.9%) for longwave compared to surface observations. The standard deviation between surface downward shortwave flux calculations and observations at the 3-hourly time scale is reduced when the diurnal cycle of cloud changes is explicitly accounted for. The improvement is smaller for surface downward longwave flux owing to an additional sensitivity to boundary layer temperature/humidity, which has a weaker diurnal cycle compared to clouds.

scholarly journals Observation-Based Decomposition of Radiative Perturbations and Radiative Kernels

2018 ◽  
Vol 31 (24) ◽  
pp. 10039-10058 ◽  
Author(s):  
Tyler J. Thorsen ◽  
Seiji Kato ◽  
Norman G. Loeb ◽  
Fred G. Rose
Keyword(s):  
Water Vapor ◽  
Radiative Transfer ◽  
Radiant Energy ◽  
Energy System ◽  
Radiation Budget ◽  
Cloud Radar ◽  
Cloud Properties ◽  
Individual Contributions ◽  
Radiative Perturbation ◽  
The Individual

The Clouds and the Earth’s Radiant Energy System (CERES)–partial radiative perturbation [PRP (CERES-PRP)] methodology applies partial-radiative-perturbation-like calculations to observational datasets to directly isolate the individual cloud, atmospheric, and surface property contributions to the variability of the radiation budget. The results of these calculations can further be used to construct radiative kernels. A suite of monthly mean observation-based inputs are used for the radiative transfer, including cloud properties from either the diurnally resolved passive-sensor-based CERES synoptic (SYN) data or the combination of the CloudSat cloud radar and Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations ( CALIPSO) lidar. The CloudSat/ CALIPSO cloud profiles are incorporated via a clustering method that obtains monthly mean cloud properties suitable for accurate radiative transfer calculations. The computed fluxes are validated using the TOA fluxes observed by CERES. Applications of the CERES-PRP methodology are demonstrated by computing the individual contributions to the variability of the radiation budget over multiple years and by deriving water vapor radiative kernels. The calculations for the former are used to show that an approximately linear decomposition of the total flux anomalies is achieved. The observation-based water vapor kernels were used to investigate the accuracy of the GCM-based NCAR CAM3.0 water vapor kernel. Differences between our observation-based kernel and the NCAR one are marginally larger than those inferred by previous comparisons among different GCM kernels.

scholarly journals Two MODIS Aerosol Products over Ocean on the Terra and Aqua CERES SSF Datasets

2005 ◽  
Vol 62 (4) ◽  
pp. 1008-1031 ◽  
Author(s):  
Alexander Ignatov ◽  
Patrick Minnis ◽  
Norman Loeb ◽  
Bruce Wielicki ◽  
Walter Miller ◽  
...  
Keyword(s):  
Single Channel ◽  
Radiant Energy ◽  
Cloud Amount ◽  
Energy System ◽  
Poor Quality ◽  
Radiation Budget ◽  
Quality Data ◽  
Radiative Fluxes ◽  
Moderate Resolution Imaging Spectroradiometer ◽  
The Impact

Abstract Understanding the impact of aerosols on the earth’s radiation budget and the long-term climate record requires consistent measurements of aerosol properties and radiative fluxes. The Clouds and the Earth’s Radiant Energy System (CERES) Science Team combines satellite-based retrievals of aerosols, clouds, and radiative fluxes into Single Scanner Footprint (SSF) datasets from the Terra and Aqua satellites. Over ocean, two aerosol products are derived from the Moderate Resolution Imaging Spectroradiometer (MODIS) using different sampling and aerosol algorithms. The primary, or M, product is taken from the standard multispectral aerosol product developed by the MODIS aerosol group while a simpler, secondary [Advanced Very High Resolution Radiometer (AVHRR) like], or A, product is derived by the CERES Science Team using a different cloud clearing method and a single-channel aerosol algorithm. Two aerosol optical depths (AOD), τA1 and τA2, are derived from MODIS bands 1 (0.644 μm) and 6 (1.632 μm) resembling the AVHRR/3 channels 1 and 3A, respectively. On Aqua the retrievals are made in band 7 (2.119 μm) because of poor quality data from band 6. The respective Ångström exponents can be derived from the values of τ. The A product serves as a backup for the M product. More importantly, the overlap of these aerosol products is essential for placing the 20+ year heritage AVHRR aerosol record in the context of more advanced aerosol sensors and algorithms such as that used for the M product. This study documents the M and A products, highlighting their CERES SSF specifics. Based on 2 weeks of global Terra data, coincident M and A AODs are found to be strongly correlated in both bands. However, both domains in which the M and A aerosols are available, and the respective τ/α statistics significantly differ because of discrepancies in sampling due to differences in cloud and sun-glint screening. In both aerosol products, correlation is observed between the retrieved aerosol parameters (τ/α) and ambient cloud amount, with the dependence in the M product being more pronounced than in the A product.

scholarly journals Advances in Geostationary-Derived Longwave Fluxes for the CERES Synoptic (SYN1deg) Product

2016 ◽  
Vol 33 (3) ◽  
pp. 503-521 ◽  
Author(s):  
David R. Doelling ◽  
Moguo Sun ◽  
Le Trang Nguyen ◽  
Michele L. Nordeen ◽  
Conor O. Haney ◽  
...  
Keyword(s):  
Water Vapor ◽  
Radiant Energy ◽  
Energy System ◽  
Direct Conversion ◽  
Radiation Budget ◽  
High Temporal Resolution ◽  
Climate Data ◽  
Directional Model ◽  
Vapor Channel ◽  
Cloud Properties

AbstractThe Clouds and the Earth’s Radiant Energy System (CERES) project has provided the climate community 15 years of globally observed top-of-the-atmosphere fluxes critical for climate and cloud feedback studies. To accurately monitor the earth’s radiation budget, the CERES instrument footprint fluxes must be spatially and temporally averaged properly. The CERES synoptic 1° (SYN1deg) product incorporates derived fluxes from the geostationary satellites (GEOs) to account for the regional diurnal flux variations in between Terra and Aqua CERES measurements. The Edition 4 CERES reprocessing effort has provided the opportunity to reevaluate the derivation of longwave (LW) fluxes from GEO narrowband radiances by examining the improvements from incorporating 1-hourly versus 3-hourly GEO data, additional GEO infrared (IR) channels, and multichannel GEO cloud properties. The resultant GEO LW fluxes need to be consistent across the 16-satellite climate data record. To that end, the addition of the water vapor channel, available on all GEOs, was more effective than using a reanalysis dataset’s column-weighted relative humidity combined with the window channel radiance. The benefit of the CERES LW angular directional model to derive fluxes was limited by the inconsistency of the GEO cloud retrievals. Greater success was found in the direct conversion of window and water vapor channel radiances into fluxes. Incorporating 1-hourly GEO fluxes had the greatest impact on improving the accuracy of high-temporal-resolution fluxes, and normalizing the GEO LW fluxes with CERES greatly reduced the monthly regional LW flux bias.

scholarly journals Quality assessment of Second-generation Global Imager (SGLI)-observed cloud properties using SKYNET surface observation data

2021 ◽  
Author(s):  
Pradeep Khatri ◽  
Tadahiro Hayasaka ◽  
Hitoshi Irie ◽  
Husi Letu ◽  
Takashi Y. Nakajima ◽  
...  
Keyword(s):  
Second Generation ◽  
Global Climate ◽  
Observation Data ◽  
Cloud Particle ◽  
Ice Clouds ◽  
Cloud Optical Depth ◽  
Cloud Properties ◽  
Moderate Resolution ◽  
Moderate Resolution Imaging Spectroradiometer

Abstract. The Second-generation Global Imager (SGLI) onboard the Global Change Observation Mission – Climate (GCOM-C) satellite launched on December 23, 2017, observes various geophysical parameters with the aim of a better understanding of the global climate system. As part of that aim, SGLI has great potential to unravel several uncertainties related to clouds by providing new cloud products along with several other atmospheric products related to cloud climatology, including aerosol products from polarization channels. However, a very little is known about the quality of the SGLI cloud products. This study uses data about clouds and global irradiances observed from the Earth’s surface using a sky radiometer and a pyranometer, respectively, to understand the quality of the two most fundamental cloud properties—cloud optical depth (COD) and cloud-particle effective radius (CER)—of both water and ice clouds. The SGLI-observed COD agrees well with values observed from the surface, although it agrees better for water clouds than for ice clouds, while the SGLI-observed CER exhibits poorer agreement than does the COD, with the SGLI values being generally higher than the sky radiometer values. These comparisons between the SGLI and sky radiometer cloud properties are found to differ for different cloud types of both the water and ice cloud phases and different solar and satellite viewing angles by agreeing better for relatively uniform and flat cloud type and for relatively low solar zenith angle. Analyses of SGLI-observed reflectance functions and values calculated by assuming plane-parallel cloud layers suggest that SGLI-retrieved cloud properties can have biases on the solar and satellite viewing angles, similar to other satellite sensors including the Moderate Resolution Imaging Spectroradiometer (MODIS). Furthermore, it is found that the SGLI-observed cloud properties reproduce global irradiances quite satisfactorily for both water and ice clouds by resembling several important features of the COD comparison, such as the better agreement for water clouds than for ice clouds and the tendency to underestimate (resp. overestimate) the COD in SGLI observations for optically thick (resp. thin) clouds.

Sign in / Sign up

Export Citation Format

Share Document