scholarly journals A Case Study on the Impact of Ensemble Data Assimilation with GNSS-Zenith Total Delay and Radar Data on Heavy Rainfall Prediction

2020 ◽  
Vol 148 (3) ◽  
pp. 1075-1098 ◽  
Author(s):  
Shu-Chih Yang ◽  
Zih-Mao Huang ◽  
Ching-Yuang Huang ◽  
Chih-Chien Tsai ◽  
Ta-Kang Yeh
Keyword(s):  
Data Assimilation ◽  
Heavy Rainfall ◽  
Weather Prediction ◽  
Radar Data ◽  
Total Delay ◽  
Ensemble Data Assimilation ◽  
Zenith Total Delay ◽  
Ensemble Data ◽  
Convective Scale ◽  
The Impact

Abstract The performance of a numerical weather prediction model using convective-scale ensemble data assimilation with ground-based global navigation satellite systems-zenith total delay (ZTD) and radar data is investigated on a heavy rainfall event that occurred in Taiwan on 10 June 2012. The assimilation of ZTD and/or radar data is performed using the framework of the WRF local ensemble transform Kalman filter with a model grid spacing of 2 km. Assimilating radar data is beneficial for predicting the rainfall intensity of this local event but produces overprediction in southern Taiwan and underprediction in central Taiwan during the first 3 h. Both errors are largely overcome by assimilating ZTD data to improve mesoconvective-scale moisture analyses. Consequently, assimilating both the ZTD and radar data show advantages in terms of the location and intensity of the heavy rainfall. Sensitivity experiments involving this event indicate that the impact of ZTD data is improved by using a broader horizontal localization scale than the convective scale used for radar data assimilation. This optimization is necessary in order to consider more fully the network density of the ZTD observations and the horizontal scale of the moisture transport by the southwesterly flow in this case.

scholarly journals Southern High-Latitude Ensemble Data Assimilation in the Antarctic Mesoscale Prediction System

2005 ◽  
Vol 133 (12) ◽  
pp. 3431-3449 ◽  
Author(s):  
D. M. Barker
Keyword(s):  
Data Assimilation ◽  
Sampling Error ◽  
Forecast Error ◽  
Weather Prediction ◽  
Forecast Errors ◽  
Prediction System ◽  
Spatial Covariance ◽  
Ensemble Data Assimilation ◽  
Ensemble Data ◽  
The Antarctic

Abstract Ensemble data assimilation systems incorporate observations into numerical models via solution of the Kalman filter update equations, and estimates of forecast error covariances derived from ensembles of model integrations. In this paper, a particular algorithm, the ensemble square root filter (EnSRF), is tested in a limited-area, polar numerical weather prediction (NWP) model: the Antarctic Mesoscale Prediction System (AMPS). For application in the real-time AMPS, the number of model integrations that can be run to provide forecast error covariances is limited, resulting in an ensemble sampling error that degrades the analysis fit to observations. In this work, multivariate, climatologically plausible forecast error covariances are specified via averaged forecast difference statistics. Ensemble representations of the “true” forecast errors, created using randomized control variables of the fifth-generation Pennsylvania State University–National Center for Atmospheric Research (PSU–NCAR) Mesoscale Model (MM5) three-dimensional variational (3DVAR) data assimilation system, are then used to assess the dependence of sampling error on ensemble size, data density, and localization of covariances using simulated observation networks. Results highlight the detrimental impact of ensemble sampling error on the analysis increment structure of correlated, but unobserved fields—an issue not addressed by the spatial covariance localization techniques used to date. A 12-hourly cycling EnSRF/AMPS assimilation/forecast system is tested for a two-week period in December 2002 using real, conventional (surface, rawinsonde, satellite retrieval) observations. The dependence of forecast scores on methods used to maintain ensemble spread and the inclusion of perturbations to lateral boundary conditions are studied.

scholarly journals Evaluation of Combined Satellite and Radar Data Assimilation with POD-4DEnVar Method on Rainfall Forecast

2020 ◽  
Vol 10 (16) ◽  
pp. 5493 ◽  
Author(s):  
Jingnan Wang ◽  
Lifeng Zhang ◽  
Jiping Guan ◽  
Mingyang Zhang
Keyword(s):  
Data Assimilation ◽  
Weather Prediction ◽  
Weather Forecast ◽  
Radar Data ◽  
Precipitation Forecast ◽  
Rainfall Forecast ◽  
Skill Scores ◽  
The Individual ◽  
The Impact ◽  
Radar Data Assimilation

Satellite and radar observations represent two fundamentally different remote sensing observation types, providing independent information for numerical weather prediction (NWP). Because the individual impact on improving forecast has previously been examined, combining these two resources of data potentially enhances the performance of weather forecast. In this study, satellite radiance, radar radial velocity and reflectivity are simultaneously assimilated with the Proper Orthogonal Decomposition (POD)-based ensemble four-dimensional variational (4DVar) assimilation method (referred to as POD-4DEnVar). The impact is evaluated on continuous severe rainfall processes occurred from June to July in 2016 and 2017. Results show that combined assimilation of satellite and radar data with POD-4DEnVar has the potential to improve weather forecast. Averaged over 22 forecasts, RMSEs indicate that though the forecast results are sensitive to different variables, generally the improvement is found in different pressure levels with assimilation. The precipitation skill scores are generally increased when assimilation is carried out. A case study is also examined to figure out the contributions to forecast improvement. Better intensity and distribution of precipitation forecast is found in the accumulated rainfall evolution with POD-4DEnVar assimilation. These improvements are attributed to the local changes in moisture, temperature and wind field. In addition, with radar data assimilation, the initial rainwater and cloud water conditions are changed directly. Both experiments can simulate the strong hydrometeor in the precipitation area, but assimilation spins up faster, strengthening the initial intensity of the heavy rainfall. Generally, the combined assimilation of satellite and radar data results in better rainfall forecast than without data assimilation.

scholarly journals Advancing from Convection-Allowing NWP to Warn-on-Forecast: Evidence of Progress

2018 ◽  
Vol 33 (2) ◽  
pp. 599-607 ◽  
Author(s):  
John R. Lawson ◽  
John S. Kain ◽  
Nusrat Yussouf ◽  
David C. Dowell ◽  
Dustan M. Wheatley ◽  
...  
Keyword(s):  
Data Assimilation ◽  
Real Time ◽  
Initial Conditions ◽  
Spatial Scales ◽  
Weather Prediction ◽  
Radar Data ◽  
Model Systems ◽  
Deterministic Systems ◽  
Forecast Lead Time ◽  
The Impact

Abstract The Warn-on-Forecast (WoF) program, driven by advanced data assimilation and ensemble design of numerical weather prediction (NWP) systems, seeks to advance 0–3-h NWP to aid National Weather Service warnings for thunderstorm-induced hazards. An early prototype of the WoF prediction system is the National Severe Storms Laboratory (NSSL) Experimental WoF System for ensembles (NEWSe), which comprises 36 ensemble members with varied initial conditions and parameterization suites. In the present study, real-time 3-h quantitative precipitation forecasts (QPFs) during spring 2016 from NEWSe members are compared against those from two real-time deterministic systems: the operational High Resolution Rapid Refresh (HRRR, version 1) and an upgraded, experimental configuration of the HRRR. All three model systems were run at 3-km horizontal grid spacing and differ in initialization, particularly in the radar data assimilation methods. It is the impact of this difference that is evaluated herein using both traditional and scale-aware verification schemes. NEWSe, evaluated deterministically for each member, shows marked improvement over the two HRRR versions for 0–3-h QPFs, especially at higher thresholds and smaller spatial scales. This improvement diminishes with forecast lead time. The experimental HRRR model, which became operational as HRRR version 2 in August 2016, also provides added skill over HRRR version 1.

Ensemble Data Assimilation to Characterize Surface-Layer Errors in Numerical Weather Prediction Models

2013 ◽  
Vol 141 (6) ◽  
pp. 1804-1821 ◽  
Author(s):  
J. P. Hacker ◽  
W. M. Angevine
Keyword(s):  
Surface Layer ◽  
Data Assimilation ◽  
Atmospheric Surface Layer ◽  
Weather Prediction ◽  
Model Error ◽  
Time Of Day ◽  
Turbulent Heat ◽  
Model Errors ◽  
Ensemble Data Assimilation ◽  
Ensemble Data

Abstract Experiments with the single-column implementation of the Weather Research and Forecasting Model provide a basis for deducing land–atmosphere coupling errors in the model. Coupling occurs both through heat and moisture fluxes through the land–atmosphere interface and roughness sublayer, and turbulent heat, moisture, and momentum fluxes through the atmospheric surface layer. This work primarily addresses the turbulent fluxes, which are parameterized following the Monin–Obukhov similarity theory applied to the atmospheric surface layer. By combining ensemble data assimilation and parameter estimation, the model error can be characterized. Ensemble data assimilation of 2-m temperature and water vapor mixing ratio, and 10-m wind components, forces the model to follow observations during a month-long simulation for a column over the well-instrumented Atmospheric Radiation Measurement (ARM) Central Facility near Lamont, Oklahoma. One-hour errors in predicted observations are systematically small but nonzero, and the systematic errors measure bias as a function of local time of day. Analysis increments for state elements nearby (15 m AGL) can be too small or have the wrong sign, indicating systematically biased covariances and model error. Experiments using the ensemble filter to objectively estimate a parameter controlling the thermal land–atmosphere coupling show that the parameter adapts to offset the model errors, but that the errors cannot be eliminated. Results suggest either structural errors or further parametric errors that may be difficult to estimate. Experiments omitting atypical observations such as soil and flux measurements lead to qualitatively similar deductions, showing the potential for assimilating common in situ observations as an inexpensive framework for deducing and isolating model errors.

Improved Prediction of Landfalling Tropical Cyclone in China Based on Assimilation of Radar Radial Winds with New Super-Observation Processing

2020 ◽  
Vol 35 (6) ◽  
pp. 2523-2539
Author(s):  
Jianing Feng ◽  
Yihong Duan ◽  
Qilin Wan ◽  
Hao Hu ◽  
Zhaoxia Pu
Keyword(s):  
Data Assimilation ◽  
Inner Core ◽  
Doppler Radar ◽  
Weather Prediction ◽  
Extreme Rainfall ◽  
Radar Data ◽  
Numerical Weather Prediction Model ◽  
Previous Method ◽  
Horizontal Wind ◽  
The Impact

AbstractThis work explores the impact of assimilating radial winds from the Chinese coastal Doppler radar on track, intensity, and quantitative precipitation forecasts (QPF) of landfalling tropical cyclones (TCs) in a numerical weather prediction model, focusing mainly on two aspects: 1) developing a new coastal radar super-observation (SO) processing method, namely, an evenly spaced thinning method (ESTM) that is fit for landfalling TCs, and 2) evaluating the performance of the radar radial wind data assimilation in QPFs of landfalling TCs with multiple TC cases. Compared to a previous method of generating SOs (i.e., the radially spaced thinning method), in which the density of SOs is equal within the radial space of a radar scanning volume, the SOs created by ESTM are almost evenly distributed in the horizontal grids of the model background, resulting in more observations located in the TC inner-core region being involved in SOs. The use of SOs from ESTM leads to more cyclonic wind innovation, and larger analysis increments of height and horizontal wind in the lower level in an ensemble Kalman filter data assimilation experiment with TC Mujigae (2015). Overall, forecasts of a TC’s landfalling position, intensity, and QPF are improved by radar data assimilation for all cases, including Mujigae and the other eight TCs that made landfall on the Chinese mainland in 2017. Specifically, through assimilation, TC landing position error and intensity error are reduced by 33% and 25%, respectively. The mean equitable threat score of extreme rainfall [>80 mm (3 h)−1] forecasts is doubled on average over all cases.

scholarly journals Operational Assimilation of GPS Zenith Total Delay Observations into the Met Office Numerical Weather Prediction Models

2012 ◽  
Vol 140 (8) ◽  
pp. 2706-2719 ◽  
Author(s):  
Gemma V. Bennitt ◽  
Adrian Jupp
Keyword(s):  
Numerical Weather Prediction ◽  
Prediction Models ◽  
Weather Prediction ◽  
Three Dimensional ◽  
Total Delay ◽  
Numerical Weather ◽  
Zenith Total Delay ◽  
Nwp Model ◽  
The Impact ◽  
Numerical Weather Prediction Models

Abstract Zenith total delay (ZTD) observations derived from ground-based GPS receivers have been assimilated operationally into the Met Office North Atlantic and European (NAE) numerical weather prediction (NWP) model since 2007. Assimilation trials were performed using the Met Office NAE NWP model at both 12- and 24-km resolution to assess the impact of ZTDs on forecasts. ZTDs were found generally to increase relative humidity in the analysis, increasing the humidity bias compared to radiosonde observations, which persisted through the forecasts at some vertical levels. Improvements to cloud forecasts were also identified. Assimilation of ZTDs using both three-dimensional and four-dimensional variational data assimilation (3D-Var/4D-Var) was investigated, and it is found that assimilation at 4D-Var does not deliver any clear benefit over 3D-Var in the periods studied with the NAE model. This paper summarizes the methods used to assimilate ZTDs at the Met Office and presents the results of impact trials performed prior to operational assimilation. Future improvements to the assimilation methods are discussed.

scholarly journals Performance evaluation of a throughput-aware framework for ensemble data assimilation: the case of NICAM-LETKF

2016 ◽  
Vol 9 (7) ◽  
pp. 2293-2300 ◽  
Author(s):  
Hisashi Yashiro ◽  
Koji Terasaki ◽  
Takemasa Miyoshi ◽  
Hirofumi Tomita
Keyword(s):  
Data Assimilation ◽  
High Performance ◽  
Weather Prediction ◽  
File Systems ◽  
Atmospheric Model ◽  
Distributed File Systems ◽  
Ensemble Data Assimilation ◽  
Computational Performance ◽  
Ensemble Data ◽  
Data Throughput

Abstract. In this paper, we propose the design and implementation of an ensemble data assimilation (DA) framework for weather prediction at a high resolution and with a large ensemble size. We consider the deployment of this framework on the data throughput of file input/output (I/O) and multi-node communication. As an instance of the application of the proposed framework, a local ensemble transform Kalman filter (LETKF) was used with a Non-hydrostatic Icosahedral Atmospheric Model (NICAM) for the DA system. Benchmark tests were performed using the K computer, a massive parallel supercomputer with distributed file systems. The results showed an improvement in total time required for the workflow as well as satisfactory scalability of up to 10 K nodes (80 K cores). With regard to high-performance computing systems, where data throughput performance increases at a slower rate than computational performance, our new framework for ensemble DA systems promises drastic reduction of total execution time.

scholarly journals An Ice-Phase Microphysics Forward Model and Preliminary Results of Polarimetric Radar Data Assimilation

2017 ◽  
Vol 145 (2) ◽  
pp. 683-708 ◽  
Author(s):  
Xuanli Li ◽  
John R. Mecikalski ◽  
Derek Posselt
Keyword(s):  
Data Assimilation ◽  
Radial Velocity ◽  
Weather Prediction ◽  
Radar Data ◽  
Forward Model ◽  
Precipitation Forecast ◽  
Upper Troposphere ◽  
The Impact ◽  
Radar Data Assimilation ◽  
Ice Phase

In this study, an ice-phase microphysics forward model has been developed for the Weather Research and Forecasting (WRF) Model three-dimensional variational data assimilation (WRF 3D-Var) system. Radar forward operators for reflectivity and the polarimetric variable, specific differential phase ( KDP), have been built into the ice-phase WRF 3D-Var package to allow modifications in liquid (cloud water and rain) and solid water (cloud ice and snow) fields through data assimilation. Experiments have been conducted to assimilate reflectivity and radial velocity observations collected by the Weather Surveillance Radar-1988 Doppler (WSR-88D) in Hytop, Alabama, for a mesoscale convective system (MCS) on 15 March 2008. Numerical results have been examined to assess the impact of the WSR-88D data using the ice-phase WRF 3D-Var radar data assimilation package. The main goals are to first demonstrate radar data assimilation with an ice-phase microphysics forward model and second to improve understanding on how to enhance the utilization of radar data in numerical weather prediction. Results showed that the assimilation of reflectivity and radial velocity data using the ice-phase system provided significant improvement especially in the mid- to upper troposphere. The improved initial conditions led to apparent improvement in the short-term precipitation forecast of the MCS. An additional experiment has been conducted to explore the assimilation of KDP data collected by the Advanced Radar for Meteorological and Operational Research (ARMOR). Results showed that KDP data have been successfully assimilated using the ice-phase 3D-Var package. A positive impact of the KDP data has been found on rainwater in the lower troposphere and snow in the mid- to upper troposphere.

Sign in / Sign up

Export Citation Format

Share Document