Prediction of haematocrit in dried blood spots from the measurement of haemoglobin using commercially available sodium lauryl sulphate

Author(s):  
G Richardson ◽  
D Marshall ◽  
BG Keevil

Background When preparing dried blood spots (DBSs), haematocrit (Hct) can affect the ability of the blood to spread through the filter paper, thus resulting in varying quantities of sample being measured when fixed subpunches of the DBSs are taken. It may be important to predict the sample Hct to correct volume differences. Methods Blood (10  µL) was applied to Perkin Elmer 226® paper. The samples ( n = 165) were allowed to dry for 24 h, and the entire blood spots were cut out. Subpunch analysis was also performed on blood spots prepared from 75  µL EDTA blood, taking 6 mm subpunches centrally and peripherally from the spots ( n = 59). The spots were eluted with 100  µL water, and a 10  µL aliquot of lysate was added to sulfolyser reagent (80  µL) in a microtitre plate. Hb was measured at 550 nm using an ELISA plate reader. DBS samples were compared against blood samples measured on a routine Sysmex XN-9000 analyser. Results The Passing and Bablock regression showed Hct (DBS-predicted) = 0.99 Hct (Sysmex) −0.02, R2 = 0.87. Intra-assay imprecision measured at Hct values of 0.27, 0.40 and 0.52, gave CVs of 4.1%, 2.8% and 4.2%, respectively. Inter-assay imprecision showed CVs of 6.2%, 5.2% and 4.2%, respectively. DBS samples were stable for up to two days at 60℃, one month at room temperature and six months at 4℃. Conclusion This method provides a simple and fast estimation of predicted Hct in dried blood spots.

Blood ◽  
2014 ◽  
Vol 124 (21) ◽  
pp. 4566-4566
Author(s):  
Olga Sala Torra ◽  
Lan Beppu ◽  
Susan Branford ◽  
Linda Fletcher ◽  
Gooley Ted ◽  
...  

Abstract In many parts of the world, diagnosis and monitoring of CML patients is limited by the availability and cost of molecular testing. In countries without molecular diagnostic capabilities, blood samples can be shipped to central labs, but this is both hampered by sample degradation, and the high costs of shipping. This study explores the method of directly spotting peripheral blood onto a paper template (dried blood spots), with subsequent shipping, RNA extraction, and BCR-ABL testing. Methods: Blood Spots and Shipment. We received dried blood spots from Australia and African countries by mail or courier, and blood from CML patients from our institution were also used for these experiments. 200μL of blood (PB) was pipetted onto Whatman 503 Protein Saver Cards (PSC; Sigma-Aldrich), where each card contains four 50μL spots. Cards were allowed to dry for at least 24 hours at room temperature. For mailing, PSCs were sealed into glassine envelopes with a packet of desiccant, and then placed inside a mailing envelope following DOT and IATA regulation for shipping non-regulated, exempt human specimens. RNA Extraction from Cards and %BCR-ABL determination. Blood spots were incubated with proteinase K followed by RNA isolation using RNeasy Mini Kits (Qiagen). Extracted RNA was quantified using a NanoDrop spectrometer (Thermo Scientific). %BCR-ABL was determined using the automated Cepheid GeneXpert platform or manual two-step quantitative RT-PCR on the 7900HT Fast Real-Time PCR System (Applied Biosystems). Results: Bench top time course: To test for effects of long transit times on RNA quality, we performed a time course study of cards at room temperature (RT) with 5 samples. For each sample, multiple cards were spotted with PB. The cards were then allowed to sit at RT for predetermined amounts of time, up to 42 days, before extracting RNA. We measured RNA integrity for one of the specimens (CML # 5) and found rapid degradation with the RIN number going from 8.7 for the fresh blood to 2.8 after 28 days on the card. However the amplification for both BCR-ABL and ABL differed less than one cycle between the fresh blood and the last time point by manual qRT-PCR (BCR-ABL Ct = 23.63 for fresh blood and 24.06 for day 28 PSC; ABL Ct = 26.69 for fresh blood and 27.64 for day 28 PSC). Figure 1 shows the results of the time course experiment for the 5 samples as a plot of ΔCt versus time in days. BCR-ABL qRT-PCR concordance studies: We compared the %BCR-ABL results obtained in fresh specimen at the institution sending the sample with the %BCR-ABL results we obtained from RNA extracted from PSC using the Cepheid GeneXpert. Paired evaluable results were available for 9 samples with a median WBC = 9.8 x 109/L (range: 3.37x109/L – 85.5x109/L). Samples were 8 to 49 days old at the time of extraction. The amount of RNA input into the GeneXpert reaction ranged from 38.75ng to 1μg. The %BCR-ABL detected ranged from 0.37% to 27% (see Table). The mean absolute difference between fresh blood and PSC BCR-ABL% is 2%; the relative mean percent change for BCR-ABL, using fresh blood as the reference is 13.1% (S.D., 31.2), P = 0.24. Conclusions and future directions: Dried blood spots are relatively inexpensive method to transport blood that preserves enough RNA stability to allow highly accurate BCR-ABL detection, when compared to results performed on an identical platform using fresh peripheral blood samples. Further studies are undergoing to accurately determine the sensitivity of this method and the feasibility of using regular mail for inexpensive transport of specimens. Table 1IDWBC (1000/μL)Sample Age at Spotting (Days)Sample Age at RNA extraction (Days)RNA ng/μlVolume GeneXPert (μL)Paper %BCR-ABL (IS)GeneXpertFresh Blood % BCR-ABL (IS) GeneXpertI1na010426349naI224.101311092745I38009181544naI47.4285102.4*3.1I55.50495241.92I63.61307.4225912I785.5130102102439I812.212912.415128.8I9na1281.5250.37*0.71I103.370273257.85.7I1115.912731102325I126.612714.415na2.3 *%BCR-ABL was manually calculated due to late ABL Cts because of low starting material. Figure 1 Figure 1. Disclosures No relevant conflicts of interest to declare.


Author(s):  
Olof Beck ◽  
Maria Mellring ◽  
Christian Löwbeer ◽  
Sabina Seferaj ◽  
Anders Helander

AbstractPhosphatidylethanol (PEth) is a group of phospholipids formed in cell membranes following alcohol consumption by action of the enzyme phospholipase D (PLD). PEth measurement in whole blood samples is established as a specific alcohol biomarker with clinical and forensic applications. However, in blood specimens containing ethanol, formation of PEth may continue after sampling leading to falsely elevated concentrations. This study evaluated the use of dried blood spot (DBS) and microsampling specimens to avoid post-sampling formation of PEth. Filter paper cards and three commercial devices for volumetric microsampling of finger-pricked blood were assessed, using PEth-negative and PEth-positive whole blood fortified with 2 g/L ethanol. PEth (16:0/18:1) was measured by LC–MS/MS. Post-sampling formation of PEth occurred in wet blood and in the volumetric devices, but not filter paper cards, when stored at room temperature for 48 h. Addition of an inhibitor of PLD, sodium metavanadate (NaVO3), eliminated post-sampling formation during storage and drying. In conclusion, the present study confirmed previous observations that PEth can be formed in blood samples after collection, if the specimen contains ethanol. The results further demonstrated that post-sampling formation of PEth from ethanol also occurred with commercial devices for volumetric dried blood microsampling. In order for a PEth result not to be questioned, it is recommended to use a PLD inhibitor, whether venous blood is collected in a vacutainer tube or finger-pricked blood is obtained using devices for dried blood microsampling. Graphical abstract


1981 ◽  
Vol 27 (8) ◽  
pp. 1421-1423 ◽  
Author(s):  
K Miyai ◽  
K Ishibashi ◽  
M Kawashima

Abstract We describe a sensitive, simple, and rapid two-site immunoenzymometric assay for thyrotropin in dried blood samples on filter paper, for use in screening for neonatal primary hypothyroidism. In this method, two dried-blood spots of 3 mm diameter (equivalent to about 5.4 microliter of blood) are incubated overnight with anti-thyrotropin-beta-D-galactosidase complex in an anti-thyrotropin coated tube. Then the enzyme activity in the washed tube is determined fluorophotometrically. The range of thyrotropin measurable is 10 to 160 milli-int. units/L blood. Values for thyrotropin in dried blood samples determined by this method and those determined by radioimmunoassay correlated highly (r = 0.96).


1986 ◽  
Vol 32 (5) ◽  
pp. 854-856 ◽  
Author(s):  
F Bassett ◽  
B A Gross ◽  
C J Eastman

Abstract In this method for estimating prolactin, 50 microL of whole blood obtained by finger puncture is spotted onto filter paper and blood-spot samples are "punched out" with a 3-mm (diameter) paper punch. The blood is extracted with aqueous buffers and the prolactin measured in large batches by radioimmunoassay. Results were identical with those for prolactin in serum. Prolactin in blood spots is stable at room temperature for up to one week and for several months at -20 degrees C. This simple technique for obtaining blood samples for prolactin estimation has particular potential for field studies of lactating women.


2016 ◽  
Author(s):  
S. Dhanasekaran ◽  
G. Dhinakar Raj ◽  
A. R. Vignesh ◽  
S. T. Selvan ◽  
B. Prakash ◽  
...  

AbstractAccurate sex identification of pure line chickens in their early age has significant economic impact in breeding industry. In the recent years, range of Polymerase Chain Reaction (PCR) based sex determination techniques are routinely used to identify the sex of parent lines in breeding industries, however purified DNA is a prerequisite. Hence this study was aimed to develop a rapid and inexpensive PCR based gender identification method for chicken using whole blood samples and dried blood spots as template for PCR without DNA extraction. In addition, practicability of two W-chromosome specific gene targets in chicken for sex determination also characterised. Successful amplification of sex specific fragments and an internal control was achieved with the range of 0.125μl and 0.250μl volume of whole blood on filter paper (~1 mm) prepared from chicken and dried blood spot. This technique does not require DNA extraction, freeze/thawing of blood samples, pre-treatment with any reagents, dilution of whole blood or dried blood spots on filter paper. It can be carried out with commercially available Taq polymerase enzymes with increased concentration of MgCl2 (3 mM) and 0.5% of DMSO without optimisation of PCR buffers. In conclusion, as compared to the existing PCR based sex identification techniques, the present approach is relatively economic, time saving, requires minimal steps and eliminates the need for DNA extraction.


2017 ◽  
Vol 50 (7-8) ◽  
pp. 431-435 ◽  
Author(s):  
Ana Carolina Breier ◽  
Jaqueline Cé ◽  
Jamila Mezzalira ◽  
Vanessa V. Daitx ◽  
Vitoria C. Moraes ◽  
...  

1996 ◽  
Vol 52 (4) ◽  
pp. 308-309
Author(s):  
B. Schweiger ◽  
C. Kücherer ◽  
C. Fleischer ◽  
H. v. Spreckelsen ◽  
P. Zablocki-Kaiser ◽  
...  

1986 ◽  
Vol 8 (2) ◽  
pp. 211-213 ◽  
Author(s):  
Y. Bergqvist ◽  
Ö. Ericsson ◽  
M. Rais

Sign in / Sign up

Export Citation Format

Share Document