The Introduction of Electronics Computer Aided Design Facilities to Engineering Science Students

1989 ◽  
Vol 26 (1-2) ◽  
pp. 23-29 ◽  
Author(s):  
Rosemary A. Cobley
Keyword(s):  
Computer Aided Design ◽  
Digital Systems ◽  
Engineering Science ◽  
Science Students ◽  
Cad Tools ◽  
Student Groups ◽  
Gate Arrays ◽  
Computer Aided ◽  
Aided Design ◽  
The Impact

The impact made by professional electronic CAD tools and engineering workstations, upon undergraduate courses in the department, is outlined. Student groups have successfully designed, simulated and tested digital systems, which had been implemented as gate arrays. The interest throughout the department has highlighted areas for integrated mechanical/electronic projects.

Computer-aided design versus sketching: An exploratory case study

2012 ◽  
Vol 26 (3) ◽  
pp. 317-335 ◽  
Author(s):  
David Veisz ◽  
Essam Z. Namouz ◽  
Shraddha Joshi ◽  
Joshua D Summers
Keyword(s):  
Design Process ◽  
Computer Aided Design ◽  
Mechanical Engineering ◽  
Computer Assisted ◽  
Cad Tools ◽  
Design Project ◽  
Computer Aided ◽  
Aided Design ◽  
The Impact

AbstractThis paper presents a preliminary comparison between the role of computer-aided design (CAD) and sketching in engineering through a case study of a senior design project and interviews with industry and academia. The design team consisted of four senior level mechanical engineering students each with less than 1 year of professional experience are observed while completing an industry sponsored mechanical engineering capstone design project across a 17 week semester. Factors investigated include what CAD tools are used, when in the design process they are implemented, the justification for their use from the students' perspectives, the actual knowledge gained from their use, the impact on the final designed artifact, and the contributions of any sketches generated. At each design step, comparisons are made between CAD and sketching. The students implemented CAD tools at the onset of the project, generally failing to realize gains in design efficiency or effectiveness in the early conceptual phases of the design process. As the design became more concrete, the team was able to recognize clear gains in both efficiency and effectiveness through the use of computer assisted design programs. This study is augmented by interviews with novice and experienced industry users and academic instructors to align the trends observed in the case study with industry practice and educational emphasis. A disconnect in the perceived capability of CAD tools was found between novice and experienced user groups. Opinions on the importance of sketching skills differed between novice educators and novice industry professionals, suggesting that there is a change of opinion as to the importance of sketching formed when recent graduates transition from academia to industry. The results suggest that there is a need to emphasize the importance of sketching and a deeper understanding as to the true utility of CAD tools at each stage of the design process.

scholarly journals Upgrade and Repair of the Instrumentation Equipment on the ISS RS Simulators Using FDM 3D Printing Technology.

2021 ◽  
pp. 97-110
Author(s):  
V.V. Batrakov ◽  
A.I. Krylov ◽  
V.N. Saev ◽  
B.N. Nefyodov ◽  
V.M. Novichkov ◽  
...  
Keyword(s):  
3D Printing ◽  
Computer Aided Design ◽  
Cad Tools ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Computer Aided ◽  
Aided Design

The paper presents space simulators (SS), types of instrumentation equipment installed on the workplaces of the space simulators operators (SSOPW), multi-functional display panel (MFDP), computer-aided design (CAD) tools, 3D printing technologies.

Effect of In-office Bleaching on Color, Translucency, and Whiteness Variations in CAD-CAM Monolithic Materials

2021 ◽  
Author(s):  
RG Fonseca ◽  
RC Peńa ◽  
R Simóes ◽  
AC Ramos ◽  
LN Dovigo
Keyword(s):  
Optical Properties ◽  
Computer Aided Design ◽  
Calculated Data ◽  
Color Difference ◽  
Deionized Water ◽  
Stain Removal ◽  
Computer Aided ◽  
Cad Cam ◽  
Aided Design ◽  
The Impact

SUMMARY Little is known about the impact of bleaching on the optical properties of computer-aided design and computer-aided manufactured (CAD-CAM) monolithic materials. The aim of the present study was to evaluate the effect of one session of in-office bleaching on stain removal, staining susceptibility, translucency, and whiteness variations of CADCAM monolithic materials. Disks were fabricated from Lava Ultimate (LU), Vita Enamic (VE), Vita Suprinity (VS), and IPS e.max CAD (IPS). A spectrophotometer was used to register Commission Internationale de l’Eclairage L*a*b* coordinates. For stain removal, 80 specimens from each material were assessed at baseline (R0) and after immersion in deionized water or coffee for 365 days followed or not by bleaching with 40% hydrogen peroxide (R1). For staining susceptibility, 80 specimens from each material were analyzed at baseline (R0’), and after having been bleached or not and immersed in deionized water or coffee (R1’). Both analyses were calculated as the color difference (ΔE00) between R1-R0 and R1’-R0’, respectively. Differences in translucency (ΔTP00) and whiteness (ΔWID) between R1-R0 and R1’-R0’ were also calculated. Data were analyzed by three-way ANOVA and the Games-Howell post hoc test (α=0.05). Clinical significance was based on 50%:50% perceptibility and acceptability thresholds for ΔE00, ΔTP00 and ΔWID, respectively. Surfaces were analyzed by scanning electron microscopy. Coffee increased ΔE00 in LU, VE, and VS, and decreased their translucency and whiteness, whereas the IPS had only its whiteness affected. Bleaching after immersion in coffee decreased ΔE00 in LU and VE, and increased translucency and whiteness of LU, VE, and VS. No effect was observed on IPS. Bleaching before immersion in coffee decreased translucency of LU, but within the acceptable interval, while VE exhibited lower ΔE00, and became more translucent and less dark. Both VS and IPS were not affected. One session of in-office bleaching benefited optical properties of the previously stained LU, VE, and VS, without increasing their susceptibility to staining or adversely providing clinically unacceptable variations in their translucency and whiteness. All variations exhibited by the IPS were below the perceptible threshold.

Representing Relationships in Hierarchical Assemblies

1998 ◽  
Author(s):  
Jeff Heisserman ◽  
Raju Mattikalli
Keyword(s):  
Automated Reasoning ◽  
Computer Aided Design ◽  
Design System ◽  
Design Tools ◽  
Cad Tools ◽  
Automated Generation ◽  
Aircraft Systems ◽  
Computer Aided ◽  
Aided Design ◽  
Prototype Design

Abstract Computer aided design tools are gaining popularity in industry due to their ability to model the geometric aspects of products. This has shown substantial benefit for reducing the need and expense of building physical prototypes and allowing parts and tooling to be manufactured directly from these models. However, the current capabilities in existing CAD tools for modeling assemblies are quite limited. In this paper we introduce a representation for describing interfaces between parts within hierarchical assemblies for capturing functional and physical mating relations. This representation is designed to support automated reasoning and automated generation and modification of assemblies. It is also designed for use with very large assemblies, compactly representing the interfaces of parts and assemblies that are reused within larger assemblies. We describe how this representation is used in our prototype design system, Genesis, for designing aircraft systems.

scholarly journals Application Solid Laser-Sintered or Machined Ti6Al4V Alloy in Manufacturing of Dental Implants and Dental Prosthetic Restorations According to Dentistry 4.0 Concept

Processes ◽  
2020 ◽  
Vol 8 (6) ◽  
pp. 664 ◽  
Author(s):  
Leszek A. Dobrzański ◽  
Lech B. Dobrzański ◽  
Anna Achtelik-Franczak ◽  
Joanna Dobrzańska
Keyword(s):  
Dental Implants ◽  
Computer Aided Design ◽  
Bending Strength ◽  
Ti6al4v Alloy ◽  
Cnc Machining ◽  
Live Cells ◽  
Computer Aided ◽  
Aided Design ◽  
The Impact

This paper presents a comparison of the impact of milling technology in the computer numerically controlled (CNC) machining centre and selective laser sintering (SLS) and on the structure and properties of solid Ti6Al4V alloy. It has been shown that even small changes in technological conditions in the SLS manufacturing variant significantly affect changes from two to nearly two and a half times in tensile and bending strengths. Both the tensile and bending strength obtained in the most favourable manufacturing variant by the SLS method is over 25% higher than in the case of cast materials subsequently processed by milling. Plug-and-play SLS conditions provide about 60% of the possibilities. Structural, tribological and electrochemical tests were carried out. In vitro biological tests using osteoblasts confirm the good tendency for the proliferation of live cells on the substrate manufactured under the most favourable SLS conditions. The use of SLS additive technology for the manufacturing of dental implants and abutments made of Ti6Al4V alloy in combination with the digitisation of dental diagnostics and computer-aided design and manufacture of computer-aided design/manufacturing (CAD/CAM) following the idea of Dentistry 4.0 is the best choice of technology for manufacturing of prosthetic and implant devices used in dentistry.

Organizational Effectiveness of Computer-Aided Design

1987 ◽  
Vol 31 (2) ◽  
pp. 214-217
Author(s):  
Douglas H. Harris ◽  
Steven M. Casey
Keyword(s):  
Organizational Effectiveness ◽  
Computer Aided Design ◽  
Working Environment ◽  
Specific System ◽  
Cad System ◽  
Organizational Issues ◽  
Computer Aided ◽  
Major Factors ◽  
Aided Design ◽  
The Impact

A methodology for measuring the organizational effectiveness of computer-aided design (CAD) was developed and applied. A total of 295 of the 500 most frequent users of CAD in a major aerospace company provided data for the study. User-CAD effectiveness was found to be influenced by 43 major factors and 145 specific system and organizational issues. The 43 factors were classified into the following categories: system functions, system hardware, working environment, system reliability and consistency, user access, user support and training, and system administration. Indexes of User-CAD Effectiveness (UE) and System Availability and Reliability (AR) were combined into an Index of CAD Organizational Effectiveness (OE). Through the application of these methods and indexes, CAD system and organizational deficiencies can be diagnosed, potential high-payoff improvements can be identified, and the impact of developmental efforts can be assessed.

TECHNIQUE FOR ACCURATE POWER AND ENERGY MEASUREMENT WITH THE COMPUTER-AIDED DESIGN TOOLS

2008 ◽  
Vol 17 (03) ◽  
pp. 399-421 ◽  
Author(s):  
RANJITH KUMAR ◽  
ZHIYU LIU ◽  
VOLKAN KURSUN
Keyword(s):  
Power Consumption ◽  
Computer Aided Design ◽  
Power Estimation ◽  
Total Power ◽  
Energy Measurement ◽  
Circuit Parameter ◽  
Cad Tools ◽  
Computer Aided ◽  
Power And Energy ◽  
Aided Design

Computer-aided design (CAD) tools are frequently employed to verify the design objectives before the fabrication of an integrated circuit. An important circuit parameter that requires accurate characterization is the power consumption due to the strict constraints on the acceptable power envelope of integrated systems. Circuit simulators typically provide built-in functions to measure the power consumption. However, the accuracy of the measured power is mostly overlooked since the approximations and the methodologies used by the existing built-in power estimation tools are not well documented. The research community tends to assume that the built-in functions provide accurate power figures. This blind-trust in the CAD tools, however, may lead to gross errors in power estimation. A generic methodology to accurately measure the power and energy consumption with the circuit simulators is described in this paper. An equation to calculate the device power consumption based on the different current conduction paths in a MOSFET is presented. An expression for the total power consumption of a complex circuit is derived by explicitly considering the different circuit terminals including the inputs, the outputs, and the body-contacts. Results indicate that the power measurements with the built-in functions of widely used commercial circuit simulators can introduce significant errors in a 65 nm CMOS technology. For deeply scaled nano-CMOS circuits, a conscious power and energy measurement with the proposed explicit methodology is recommended for an accurate pre-fabrication circuit characterization.

Impact of Pulse Quenching Effect on Sensitive Area at Advanced Technologies

2013 ◽  
Vol 392 ◽  
pp. 693-696
Author(s):  
Wen Tao Xu ◽  
Yang Guo ◽  
Yan Kang Du
Keyword(s):  
Computer Aided Design ◽  
Three Dimensional ◽  
Sensitive Area ◽  
Isolation Technique ◽  
Quenching Effect ◽  
Advanced Technologies ◽  
Computer Aided ◽  
Simulation Results ◽  
Aided Design ◽  
The Impact

The impact of pulse quenching effect on the sensitive area is evaluated by using three-dimensional technology computer-aided design (TCAD) numerical simulation. Simulation results present that the pulse quenching effect could effectively reduce the sensitive area of PMOS transistors. By adopting the off-state gate isolation technique, the sensitive area is further reduced.

Sign in / Sign up

Export Citation Format

Share Document