scholarly journals Learning from demonstration using products of experts: Applications to manipulation and task prioritization

2021 ◽  
pp. 027836492110405
Author(s):  
Emmanuel Pignat ◽  
Joāo Silvério ◽  
Sylvain Calinon

Probability distributions are key components of many learning from demonstration (LfD) approaches, with the spaces chosen to represent tasks playing a central role. Although the robot configuration is defined by its joint angles, end-effector poses are often best explained within several task spaces. In many approaches, distributions within relevant task spaces are learned independently and only combined at the control level. This simplification implies several problems that are addressed in this work. We show that the fusion of models in different task spaces can be expressed as products of experts (PoE), where the probabilities of the models are multiplied and renormalized so that it becomes a proper distribution of joint angles. Multiple experiments are presented to show that learning the different models jointly in the PoE framework significantly improves the quality of the final model. The proposed approach particularly stands out when the robot has to learn hierarchical objectives that arise when a task requires the prioritization of several sub-tasks (e.g. in a humanoid robot, keeping balance has a higher priority than reaching for an object). Since training the model jointly usually relies on contrastive divergence, which requires costly approximations that can affect performance, we propose an alternative strategy using variational inference and mixture model approximations. In particular, we show that the proposed approach can be extended to PoE with a nullspace structure (PoENS), where the model is able to recover secondary tasks that are masked by the resolution of tasks of higher-importance.

The results of scientific research are presented, which made it possible to develop less labor-intensive methods for selecting flax plants to grow original (updated) seeds. Studies have shown that a positive selection of tall plants of flax, compared with the accepted counterpart (control), increased seed yield 1.7-1.9 times. Moreover, plant homogeneity according to the main characteristics (height and fiber content in the stem) characterizing the varietal quality of grown seeds turned out to be at the control level. A negative selection, involving the removal of atypical plants, provided an increase in the output volume of seeds compared to the control by 3.9-4.1 times. This selection method did not reduce the varietal quality of seed material compared to the accepted analogue. With both selection methods, after combining typical plants, seeds with the same high germination rates were obtained (96-99 %). The breeding efficiency of the grown flax seeds using narrow-row sowing methods is shown. Studies have established that narrow-row sowing of seeds with a row-spacing of 7.5 and 6.25 cm compared with sowing by a wide-row method significantly increased their yield by 2.8-3.0 and 2.3-3.0 kg / ha, respectively. The greatest influence on the formation of seed yield in narrow-row sowing (6.25 cm) was exerted by the method of sowing, the part of which was 76.1 %. As the length of seed propagation of flax in creased (up to the uterine elite 2 years) in narrow-row sowing (6.25 cm) compared to broad-row, there was no decrease in quality indicators - germination and seed strength.


2018 ◽  
Vol 184 (1) ◽  
pp. 98-108
Author(s):  
Sang-Tae Kim ◽  
Jaeryong Yoo

Abstract In this study, the radiation exposure of workers at workplaces registered and licensed between 2008 and 2017 for the production/sale/use of radioactive isotopes (RI) and radioactive generators (RG) was analysed to evaluate the quality of radiation safety management controls in use. The number of facilities using RIs increased by ~26% from 2008 to 2017 whereas the number of facilities using RGs increased by ~166% over the same period. There were 33 029 radiation workers in all fields in 2008, and the number increased by ~32% to 43 467 by 2017. However, the collective effective dose of radiation received by workers decreased in all industries except for those working in nuclear power plants. In other words, the quality of radiation safety management improved over that same time period due to the systematic, continuous introduction of safety mechanisms by the regulatory authority.


<em>Abstract.</em>—Natural resource management requires difficult decisions, broad societal costs, and sacrifices from private landowners and public agencies. With so many financial, ecological and cultural resources at stake, policy-makers, managers, and citizens need scientific predictions that can help resolve conflicts and balance the often competing needs of ecosystems and communities. Modeled information is essential for meeting this need. The words “model uncertainty” are often misinterpreted as describing a lack of knowledge about model output. In fact, they describe knowledge, not only of the one most likely modeled estimate, but also of all the other possible estimates that the model might have provided, and their likelihood. We present six case studies, from salmon habitat recovery planning, illustrating how scientists can provide more useful products by describing distributions of possible outcomes as formal probability distributions, as confidence intervals, or as descriptions of alternative scenarios. In terms of management effectiveness, the communication and use of model uncertainty can be at least as important as the quality of the original model.


2020 ◽  
Vol 8 (4) ◽  
pp. 376-388
Author(s):  
Mario Borrero ◽  
Luke R. Stroth

AbstractIn the past decade, archaeologists have increasingly made use of photogrammetry, the process of creating 3D models from photographs, in a variety of field and lab settings. We argue that we must, as a discipline, develop a consistent methodology to ensure that 3D models are held to a consistent standard, including not only photographic protocol but also the documentation of model accuracy using an agreed-upon measure. To help develop this discussion, we present our system for incorporating photogrammetry into the documentation of architecture. This technique was developed at the site of Nim Li Punit, Belize, in 2018. Excavating architecture involves documenting the pre-excavated building, liberating overburden, documenting all in situ construction (including wall fall, fill stones, and standing architecture), drawing consolidated architecture, and documenting the final state of the post-excavated buildings. The generation of 3D models greatly assisted in all facets of the excavation, documentation, analysis, and consolidation processes. To ensure that our models were accurate, we documented the reprojection error and final model horizontal distortion to assess the quality of the model. We suggest that documenting both forms of error should become standard practice in any discussion of archaeological applications of photogrammetry.


Robotica ◽  
2019 ◽  
Vol 37 (12) ◽  
pp. 2014-2034 ◽  
Author(s):  
Christian Di Natali ◽  
Tommaso Poliero ◽  
Matteo Sposito ◽  
Eveline Graf ◽  
Christoph Bauer ◽  
...  

SummaryWearable devices are fast evolving to address mobility and autonomy needs of elderly people who would benefit from physical assistance. Recent developments in soft robotics provide important opportunities to develop soft exoskeletons (also called exosuits) to enable both physical assistance and improved usability and acceptance for users. The XoSoft EU project has developed a modular soft lower limb exoskeleton to assist people with low mobility impairments. In this paper, we present the design of a soft modular lower limb exoskeleton to improve person’s mobility, contributing to independence and enhancing quality of life. The novelty of this work is the integration of quasi-passive elements in a soft exoskeleton. The exoskeleton provides mechanical assistance for subjects with low mobility impairments reducing energy requirements between 10% and 20%. Investigation of different control strategies based on gait segmentation and actuation elements is presented. A first hip–knee unilateral prototype is described, developed, and its performance assessed on a post-stroke patient for straight walking. The study presents an analysis of the human–exoskeleton energy patterns by way of the task-based biological power generation. The resultant assistance, in terms of power, was 10.9% ± 2.2% for hip actuation and 9.3% ± 3.5% for knee actuation. The control strategy improved the gait and postural patterns by increasing joint angles and foot clearance at specific phases of the walking cycle.


Author(s):  
W. Kinsner ◽  
R. Dansereau

This article presents a derivation of a new relative fractal dimension spectrum, DRq, to measure the dis-similarity between two finite probability distributions originating from various signals. This measure is an extension of the Kullback-Leibler (KL) distance and the Rényi fractal dimension spectrum, Dq. Like the KL distance, DRq determines the dissimilarity between two probability distibutions X and Y of the same size, but does it at different scales, while the scalar KL distance is a single-scale measure. Like the Rényi fractal dimension spectrum, the DRq is also a bounded vectorial measure obtained at different scales and for different moment orders, q. However, unlike the Dq, all the elements of the new DRq become zero when X and Y are the same. Experimental results show that this objective measure is consistent with the subjective mean-opinion-score (MOS) when evaluating the perceptual quality of images reconstructed after their compression. Thus, it could also be used in other areas of cognitive informatics.


2014 ◽  
Vol 0 (0) ◽  
Author(s):  
S. Kalaiselvi ◽  
A. Loganathan ◽  
R. Vijayaraghavan

AbstractReliability sampling plans are used to take decisions on the disposition of lots based on life testing of products. Such plans are developed taking into the consideration of relevant probability distributions of the lifetimes of the products under testing. When the quality of products varies over lots, then a predictive distribution of the lifetime should be used to design sampling plans. In this paper, designing of reliability single sampling plan based on the predictive distribution of the lifetime is considered. It is assumed that sampling inspection is carried out through life testing of products with hybrid censoring. The predictive distribution is obtained assuming that the probability distribution of the lifetime of the product is Rayleigh and the process parameter has an inverse-Rayleigh prior. Plan parameters are determined using hypergeometric, binomial and Poisson probabilities, providing protection to both producer as well as consumer.


2015 ◽  
Vol 12 (104) ◽  
pp. 20141197 ◽  
Author(s):  
Rachel Sacks-Davis ◽  
Emma McBryde ◽  
Jason Grebely ◽  
Margaret Hellard ◽  
Peter Vickerman

Hepatitis C virus (HCV) reinfection rates are probably underestimated due to reinfection episodes occurring between study visits. A Markov model of HCV reinfection and spontaneous clearance was fitted to empirical data. Bayesian post-estimation was used to project reinfection rates, reinfection spontaneous clearance probability and duration of reinfection. Uniform prior probability distributions were assumed for reinfection rate (more than 0), spontaneous clearance probability (0–1) and duration (0.25–6.00 months). Model estimates were 104 per 100 person-years (95% CrI: 21–344), 0.84 (95% CrI: 0.59–0.98) and 1.3 months (95% CrI: 0.3–4.1) for reinfection rate, spontaneous clearance probability and duration, respectively. Simulation studies were used to assess model validity, demonstrating that the Bayesian model estimates provided useful information about the possible sources and magnitude of bias in epidemiological estimates of reinfection rates, probability of reinfection clearance and duration or reinfection. The quality of the Bayesian estimates improved for larger samples and shorter test intervals. Uncertainty in model estimates notwithstanding, findings suggest that HCV reinfections frequently and quickly result in spontaneous clearance, with many reinfection events going unobserved.


2020 ◽  
Author(s):  
Qian Zhou ◽  
Xinping Zhang

Abstract BackgroundAppropriate hand hygiene behavior is much crucial during COVID-19 pandemic, which is influenced by workload, mental health and professional quality of life. The increasing workload, worse mental health and negative professional quality of life are severe challenges for healthcare workers, whereas the evidence of mechanism between them and hand hygiene behavior are limited. This study aimed to understand and model how HCWs’ hand hygiene behaviors were influenced by workload, mental health and professional quality of life.MethodsA total of 1,734 healthcare workers were investigated, covering self-reported hand hygiene behavior, mental health, workload, professional quality of life and socio-demographic characteristics. Structural equation modelling was conducted to confirm interrelationships and parameters among the variables.Findings The final model had a good fit (CFI=0.980; TLI=0.941; RMSEA=0.055). Higher workload was linked to worse mental health (β = 0.165, p < 0.001) and higher burnout (β = 0.183, p < 0.001). Worse mental health was linked to higher burnout (β = 0.339, p < 0.001). The higher burnout was associated with worse self-reported hand hygiene behavior (β = -0.302, p < 0.001).ConclusionWorkload is positively associated with mental health and burnout; mental health is positively related to burnout; burnout is negatively associated with hand hygiene behavior. Thus, hand hygiene behavior can be promoted by the strategy to decrease the workload, burnout and enhance mental health.


1983 ◽  
Vol 23 (1) ◽  
pp. 27
Author(s):  
B.G. McKAY

In 1982 Esso Australia completed a fundamental re-assessment of the undiscovered oil and gas potential of Australia. In the seven years since Esso's previous major study there has been a marked upsurge in exploration for hydrocarbons, particularly oil. During this period several hundred wells have been drilled and hundreds of thousands of kilometres of seismic data have been recorded. New discoveries of both oil and gas have been made in several areas. Because of this influx of new data, a re-assessment was considered timely.The assessment utilised computer-based techniques and incorporated improvements in assessment and risk theory. The study involved the identification of more than one hundred individual plays followed by the volumetric and risk assessment of those plays. The risked assessments of the individual plays were then combined to produce an overall assessment for Australia in the form of cumulative probability distributions for oil and gas.The results show that the potential exists in Australia to find a significant volume of additional oil, possibly equivalent to the amount of oil discovered to date. The assessment also indicates a high probability of abundant undiscovered gas.Although the perceived resource base is quite encouraging, no consideration was given in the assessment to operational, economic or political constraints. Consequently there is no discovery time-frame implied within the assessment results. The rate of discovery will be determined by the amount and quality of exploration effort, which in turn will be dictated by the economic and political environment under which industry is allowed to operate.


Sign in / Sign up

Export Citation Format

Share Document