On modal analysis of axially functionally graded material beam under hygrothermal effect

2019 ◽  
Vol 234 (5) ◽  
pp. 1085-1101 ◽  
Author(s):  
Pankaj Sharma ◽  
Rahul Singh ◽  
Muzamal Hussain
Keyword(s):  
Modal Analysis ◽  
Functionally Graded Material ◽  
Volume Fraction ◽  
Axial Direction ◽  
Functionally Graded ◽  
Element Analysis ◽  
Hygrothermal Effect ◽  
Graded Material ◽  
Eigen Frequencies ◽  
Axially Functionally Graded Material

This investigation focuses on the modal analysis of an axially functionally graded material beam under hygrothermal effect. The material constants of the beam are supposed to be graded smoothly along the axial direction under both power law and sigmoid law distribution. A finite element analysis with COMSOL Multiphysics® (version 5.2) package is used to find the Eigen frequencies of the beam. The accuracy of the technique is authenticated by relating the results with the prior investigation for reduced case. The effects of moisture changes, temperature, and volume fraction index, length-to-thickness ratio on the Eigen frequencies are investigated in detail. It is believed that the present investigation may be useful in the design of highly efficient environmental sensors for structural health monitoring perspective.

Effects of piezoelectric rings on electro-elasto-dynamic behaviour of functionally graded cylindrical shell

2016 ◽  
Vol 28 (2) ◽  
pp. 272-289 ◽  
Author(s):  
Mohammadreza Saviz
Keyword(s):  
Finite Element ◽  
Cylindrical Shell ◽  
Functionally Graded Material ◽  
Volume Fraction ◽  
Virtual Work ◽  
Electrical Potential ◽  
Axial Direction ◽  
Functionally Graded ◽  
Radial Coordinate ◽  
Graded Material

A layer-wise finite element approach is adopted to analyse the hollow cylindrical shell made of functionally graded material with piezoelectric rings as sensor/actuator, under dynamic load. The mechanical properties of the substrate are regulated by volume fraction as a function of radial coordinate. The thickness of functionally graded material shell and piezo-rings is divided into mathematical sub-layers and then the general layer-wise laminate theory is formulated through introducing piecewise continuous approximations across the thickness, accounting for any discontinuity in derivatives of the displacement at the interface between the ring and cylinder. The virtual work statement including structural and electrical potential energies yields the three-dimensional governing equations which are reduced to two-dimensional differential equations, using layer-wise method. For axisymmetric case, the resulted equations are solved with one-dimensional finite element method in the axial direction. By assembling stiffness and mass matrices, the required stress and displacement continuities at each interface and between the two adjacent elements are forced. The results for free vibration and static loading are applied to study the convergence and verified by comparing them to solutions of similar existing problems. The induced deformation by piezoelectric actuators as well as the effect of rings on functionally graded material shell is investigated.

FE Analysis of Functionally Graded Material Plate during Debonding Case with Different Boundary Conditions

2014 ◽  
Vol 627 ◽  
pp. 57-60 ◽  
Author(s):  
Wasim M.K. Helal ◽  
Dong Yan Shi
Keyword(s):  
Boundary Conditions ◽  
Functionally Graded Material ◽  
Volume Fraction ◽  
Maximum Shear Stress ◽  
Functionally Graded ◽  
Von Mises Stress ◽  
Sigmoid Function ◽  
Different Boundary Conditions ◽  
Graded Material ◽  
The Relationship

Functionally graded materials (FGMs) have become helpful in our engineering applications. Analysis of functionally graded material (FGM) plate during debonding case with different boundary conditions is the main purpose of this investigation. Elastic modulus (E) of functionally graded (FG) plate is assumed to vary continuously throughout the height of the plate, according the volume fraction of the constituent materials based on a modified sigmoid function, but the value of Poisson coefficient is constant. In this research, the finite element method (FEM) is used in order to show the shape of a plate made of FGM during debonding case with different boundary conditions. In the present investigation, the displacement value applied to the FGM plate is changed in order to find the relationship between the maximum von Mises stress and the displacement. Also, the relationship between the maximum shear stress and the displacement is carried out in the present work. The material gradient indexes of the FGM plate are changed from 1 to 10. The stress distributions around the debonding zone with all the material gradient indexes of the FGM plate are investigated in this work.

BI-STABLE ANALYSES OF LAMINATED FGM SHELLS

2012 ◽  
Vol 12 (02) ◽  
pp. 311-335 ◽  
Author(s):  
X. Q. HE ◽  
L. LI ◽  
S. KITIPORNCHAI ◽  
C. M. WANG ◽  
H. P. ZHU
Keyword(s):  
Power Law ◽  
Functionally Graded Material ◽  
Volume Fraction ◽  
Functionally Graded ◽  
Optimum Combination ◽  
Thickness Direction ◽  
Power Law Distribution ◽  
Deployable Structures ◽  
Graded Material ◽  
Two Parameter

Based on an inextensional two-parameter analytical model for cylindrical shells, bi-stable analyses were carried out on laminated functionally graded material (FGM) shells with various layups of fibers. Properties of FGM shells are functionally graded in the thickness direction according to a volume fraction power law distribution. The effects of constituent volume fractions of FGM matrix are examined on the curvature and twist of laminated FGM shells. The results reveal that the optimum combination of constituents of FGM matrix can be obtained for the maximum twist of FGM shells with antisymmetric layups, which helps the design of deployable structures. The effects of Young's modulus of fibers and the symmetry of layups on bi-stable behaviors are also discussed in detail.

Finite Element Analysis of Human Tibia Modeled as a Functionally Graded Material

2019 ◽  
Vol 2 (3) ◽  
Author(s):  
Ashish Tiwari ◽  
Pankaj Wahi ◽  
Niraj Sinha
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Distribution ◽  
Functionally Graded Material ◽  
Material Properties ◽  
Functionally Graded ◽  
Element Analysis ◽  
Cross Sectional ◽  
Human Tibia ◽  
Graded Material

Human tibia, the second largest bone in human body, is made of complex biological material having inhomogeneity and anisotropy in such a manner that makes it a functionally graded material. While analyses of human tibia assuming it to be made of different material regions have been attempted in past, functionally graded nature of the bone in the mechanical analysis has not been considered. This study highlights the importance of functional grading of material properties in capturing the correct stress distribution from the finite element analysis (FEA) of human tibia under static loading. Isotropic and orthotropic material properties of different regions of human tibia have been graded functionally in three different manners and assigned to the tibia model. The nonfunctionally graded and functionally graded models of tibia have been compared with each other. It was observed that the model in which functional grading was not performed, uneven distribution and unrealistic spikes of stresses occurred at the interfaces of different material regions. On the contrary, the models with functional grading were free from this potential artifact. Hence, our analysis suggests that functional grading is essential for predicting the actual distribution of stresses in the entire bone, which is important for biomechanical analysis. We find that orthotropic nature of the bone tends to increase the maximum von Mises stress in the entire tibia, while inclusion of cross-sectional inhomogeneity typically increases the stresses across normal cross section. Accordingly, our analysis suggests that both orthotropy as well as cross-sectional inhomogeneity should be included to correctly capture the stress distribution in the bone.

Investigation of the mechanical properties on the large amplitude free vibrations of the functionally graded material sandwich plates

2017 ◽  
Vol 21 (3) ◽  
pp. 895-916 ◽  
Author(s):  
Sid Ahmed Belalia
Keyword(s):  
Mechanical Properties ◽  
Functionally Graded Material ◽  
Large Amplitude ◽  
Volume Fraction ◽  
Equations Of Motion ◽  
Free Vibrations ◽  
Functionally Graded ◽  
Sandwich Plates ◽  
Nonlinear Frequency ◽  
Graded Material

In this paper, the geometrically nonlinear formulation based on von Karman’s assumptions is employed to study the large amplitude free vibrations of functionally graded materials sandwich plates. The functionally graded material sandwich plate is made up of two layers of power-law functionally graded material face sheet and one layer of ceramic homogeneous core. A hierarchical finite element is employed to define the model, taking into account the effects of the transverse shear deformation and the rotatory inertia. The equations of motion for the nonlinear vibration of the functionally graded material sandwich plates are obtained using Lagrange’s equations. Employing the harmonic balance method, the equations of motion are converted from time domain to frequency domain and then solved iteratively using the linearized updated mode method. Results for linear and nonlinear frequency parameters of the simply supported functionally graded material sandwich plates are computed and compared with the published values, and an excellent agreement was found. The influence of the mechanical properties of the functionally graded material, thickness ratio of FGM layers, and volume fraction exponent on the backbone curves and on the nonlinear frequency parameters are investigated. The effects of the material properties of two different types of ceramics on the large amplitude vibration behaviors of the functionally graded material sandwich plates is also presented and discussed for the first time.

Sign in / Sign up

Export Citation Format

Share Document