Assessing the Rotation of the First Metatarsal on Computed Tomography Scans: A Systematic Literature Review

2021 ◽  
pp. 107110072110206
Author(s):  
Ali-Asgar Najefi ◽  
Karan Malhotra ◽  
Shelain Patel ◽  
Nicholas Cullen ◽  
Matthew Welck
Keyword(s):  
Computed Tomography ◽  
Literature Review ◽  
Hallux Valgus ◽  
Systematic Literature Review ◽  
3D Modeling ◽  
Multiple Methods ◽  
Recurrence Rates ◽  
Level Of Evidence ◽  
First Metatarsal ◽  
Α Angle

Background: Hallux valgus is a multiplanar deformity that is often treated on the basis of 2-dimensional (2D) parameters and radiographs. Recurrence rates after surgical correction remain high, and failure to correct pronation of the metatarsal is increasingly stipulated as being part of the problem. Multiple methods of assessing metatarsal pronation have been proposed. Methods: We performed a systematic literature review identifying studies that measured metatarsal pronation and torsion on computed tomography (CT) scans. Specific methodology, patient groups, results, and reliability assessments were all reported. Results: We identified 14 studies that fulfilled the inclusion criteria. Eleven studies measured 2D values on CT scan, and 3 studies used computer-based 3-dimensional (3D) modeling and artificial intelligence systems to help calculate pronation. Metatarsal pronation angle, α angle, sesamoid rotation angle, and measurements for torsion were the most commonly used methods. All angles and measurements were performed as 2D measurements, but the metatarsal pronation angle was also performed with 3D modeling. Reliability and reproducibility of the α angle and metatarsal pronation angle were excellent, despite being performed on studies with small numbers. Conclusion: Multiple methods have been reported to demonstrate first metatarsal pronation on CT, of which the α angle and the metatarsal pronation angle are the most pragmatic and useful in a clinical setting. Further work is needed to further validate the reliability of these measurements in larger series and to identify normal pronation and metatarsal torsion on weightbearing imaging. Further work is required to determine whether addressing pronation reduces recurrence rates and improves outcomes in surgery for hallux valgus. Level of Evidence: Level III

Correlation of Different Methods of Measuring Pronation of the First Metatarsal on Weightbearing CT Scans

2021 ◽  
pp. 107110072110030
Author(s):  
Matthew S. Conti ◽  
Tamanna J. Patel ◽  
Kristin C. Caolo ◽  
Joseph M. Amadio ◽  
Mark C. Miller ◽  
...  
Keyword(s):  
Hallux Valgus ◽  
Computer Aided Design ◽  
Foot And Ankle ◽  
Level Of Evidence ◽  
3 Dimensional ◽  
3D Cad ◽  
First Metatarsal ◽  
Hallux Valgus Deformity ◽  
Second Metatarsal ◽  
Α Angle

Background: There is no consensus in the foot and ankle literature regarding how to measure pronation of the first metatarsal in patients with hallux valgus. The primary purpose of this study was to compare 2 previously published methods for measuring pronation of the first metatarsal and a novel 3-dimensional measurement of pronation to determine if different measurements of pronation are associated with each other. Methods: Thirty patients who underwent a modified Lapidus procedure for their hallux valgus deformity were included in this study. Pronation of the first metatarsal was measured on weightbearing computed tomography (WBCT) scans using the α angle with reference to the floor, a 3-dimensional computer-aided design (3D CAD) calculation with reference to the second metatarsal, and a novel method, called the triplanar angle of pronation (TAP), that included references to both the floor (floor TAP) and base of the second metatarsal (second TAP). Pearson’s correlation coefficients were used to determine if the 3 calculated angles of pronation correlated to each other. Results: Preoperative and postoperative α angle and 3D CAD had no correlation with each other ( r = 0.094, P = .626 and r = 0.076, P = .694, respectively). Preoperative and postoperative second TAP and 3D CAD also had no correlation ( r = 0.095, P = .624 and r = 0.320, P = .09, respectively). However, preoperative and postoperative floor TAP and α angle were found to have moderate correlations ( r = 0.595, P = .001 and r = 0.501, P = .005, respectively). Conclusion: The calculation of first metatarsal pronation is affected by the reference and technique used, and further work is needed to establish a consistent measurement for the foot and ankle community. Level of Evidence: Level III, retrospective cohort study.

Association of First Metatarsal Pronation Correction With Patient-Reported Outcomes and Recurrence Rates in Hallux Valgus

2021 ◽  
pp. 107110072110469
Author(s):  
Matthew S. Conti ◽  
Tamanna J. Patel ◽  
Jiaqi Zhu ◽  
Andrew J. Elliott ◽  
Stephen F. Conti ◽  
...  
Keyword(s):  
Physical Function ◽  
Hallux Valgus ◽  
Patient Reported Outcomes ◽  
Measurement Information ◽  
Recurrence Rates ◽  
Level Of Evidence ◽  
3 Dimensional ◽  
First Metatarsal ◽  
Patient Reported ◽  
Multivariable Regression

Background: The purpose of this study was to determine if a postoperative decrease in first metatarsal pronation on 3-dimensional imaging was associated with changes in patient-reported outcomes as measured by the Patient-Reported Outcomes Measurement Information System (PROMIS) physical function, pain interference, and pain intensity domains or recurrence rates in patients with hallux valgus (HV) who undergo a first tarsometatarsal fusion (modified Lapidus procedure). Methods: Thirty-nine consecutive HV patients who met the inclusion criteria and underwent a modified Lapidus procedure had preoperative and ≥2-year postoperative PROMIS scores and had first metatarsal pronation measured on preoperative and at least 5-month postoperative weightbearing CT scans were included. Multivariable regression analyses were used to investigate differences in the change in PROMIS domains preoperatively and 2 years postoperatively between patients with “no change/increased first metatarsal pronation” and “decreased first metatarsal pronation.” A log-binomial regression analysis was performed to identify if a decrease in first metatarsal pronation was associated with recurrence of the HV deformity. Results: The decreased first metatarsal pronation group had a significantly greater improvement in the PROMIS physical function scale by 7.2 points ( P = .007) compared with the no change/increased first metatarsal pronation group. Recurrence rates were significantly lower in the decreased first metatarsal pronation group when compared to the no change/increased first metatarsal pronation group (risk ratio 0.25, P = .025). Conclusion: Detailed review of this limited cohort of patients who underwent a modified Lapidus procedure suggests that the rotational component of the HV deformity may play an important role in outcomes and recurrence rates following the modified Lapidus procedure. Level of Evidence: Level III, retrospective cohort study.

The Role of Weightbearing Computed Tomography Scan in Hallux Valgus

2020 ◽  
pp. 107110072096239
Author(s):  
Karim Mahmoud ◽  
Sreenivasulu Metikala ◽  
Samir D. Mehta ◽  
George W. Fryhofer ◽  
Daniel C. Farber ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Linear Relationship ◽  
Hallux Valgus ◽  
Interobserver Reliability ◽  
Alpha Angle ◽  
Area Under The Curve ◽  
Level Of Evidence ◽  
Musculoskeletal Radiology ◽  
First Metatarsal ◽  
Computed Tomography Images

Background: Hyperpronation of the first metatarsal in hallux valgus (HV) is poorly understood by conventional weightbearing radiography. We aimed to evaluate this parameter using weightbearing computed tomography (WBCT) and to understand its association with other standard measurements. Methods: Retrospective evaluation of WBCT and weightbearing radiographs (WBXRs) was performed for 20 patients with HV feet and 20 controls with no such deformity. Axial computed tomography images of both groups were compared for the first metatarsal pronation angle (alpha angle) and tibial sesamoid subluxation (TSS) grades. The HV angle (HVA), first-second intermetatarsal angle (IMA), first metatarsal-medial cuneiform angle (MMCA), Meary’s angle, and calcaneal pitch (CP) angle of the study and control groups were compared on both WBXR and the corresponding 2-dimensional images of WBCT. All measurements were independently performed by 1 musculoskeletal radiology fellow and 1 foot and ankle surgical fellow. Measurements were averaged and interobserver reliability was calculated. Results: The HV group demonstrated significantly higher values for TSS grade ( P < .001) but not for alpha angle ( P = .121) compared with controls. Likewise, significantly elevated HVA and IMA were noted in the HV group on both imaging modalities, while no such differences were observed for the CP angle. Higher MMCA and Meary’s angle in the HV group were evident only on WBXR (MMCA, P = .039; Meary’s, P = .009) but not on WBCT (MMCA, P = .183; Meary’s, P = .171). Among all, the receiver operating characteristic (ROC) curves demonstrated the greatest area under the curve (AUC) for HVA, followed by IMA. The alpha angle performed only just outside the range of chance (AUC, 0.65; 95% CI, 0.52-0.69). The Pearson’s correlations of the alpha angle, in the HV group, revealed a significant linear relationship with TSS grade and with HVA on WBXR, and only trended toward a weak linear relationship with IMA and with HVA on WBCT. Conclusion: The alpha angle, a measure of abnormal hyperpronation of the first metatarsal, was an independent factor that may coexist with other parameters in HV, but in isolation had limited diagnostic utility. “Abnormal” alpha angles were even observed in individuals without HV. Increases in IMA and MMCA were not necessarily associated with similar increases in alpha angle, despite moderate correlations with TSS grade and HVA on WBXR. Nevertheless, the WBCT was a useful method for assessing hyperpronation and guiding surgical management in individual cases. Level of Evidence: Level III, retrospective comparative study.

scholarly journals First Metatarsal Pronation Stratified by Tibial Sesamoid Position on Coronal Plane: A Study Based on Weight-Bearing Computed Tomography

2021 ◽  
Author(s):  
Zhi Wang ◽  
HE huijing ◽  
ZHANG Shu ◽  
SUN Chao ◽  
WANG Xianjun ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Hallux Valgus ◽  
Linear Regression Analysis ◽  
Coronal Plane ◽  
Control Group ◽  
Study Group ◽  
First Metatarsal ◽  
The Mean ◽  
Coronal Rotation ◽  
Α Angle

Abstract Backgrounds: Few studies analyzed the coronal rotation of first metatarsal in hallux valgus patients with weightbearing computed tomography (WBCT). The purpose of this study is to investigate the association between hallux valgus parameters and first metatarsal head rotation in the coronal plane.Methods: Retrospective review of full standing WBCT scans were taken by PedCAT. A group of 123 patients with 216 feet, that intermetatarsal angle (IMA) >9 degrees and hallux valgus angle (HVA) >15 degrees, were included. 27 feet of 17 female included in control group. Measurements of forefoot hallux valgus parameters included IMA, HVA, distal metatarsal abduction angle (DMAA), metatarsal adduction angle (MAA), first metatarsal coronal rotation angle (α-angle), tibial sesamoid position (TSP) on dorsoplantar view, and sesamoid grading in the coronal plane. The differences of HVA, IMA, MAA, DMAA and α-angle in control and study group were compared by Wilcoxon rank test and student t test. Spearman correlation test was performed between α-angle and other parameters. General linear regression analysis was used to predict relationship parameters and α-angle.Results: The mean α-angle in the control group was 11.33±6.16 (range ,0-20) degrees, with the 95% confidence interval (CI) for the mean from 8.90 degrees to 13.77 degrees. The mean of α-angle in the study group was 23.75±6.32 (range,9-39) degrees, with the 95% CI from 22.90 degrees to 24.59 degrees. In the hallux valgus group, there were positive correlations between α-angle and IMA (Spearman’s correlation coefficient (rs) 0.137, P=0.044), DMAA (rs=0.176, P=.010) and TSP (rs=0.218, P=0.001). General linear regression analysis showed that α-angle was correlated with TSP (P<0.001). 208 hallux valgus feet (96.3%) had more pronation than the control group, whereas 8 feet (3.7%) had no or less pronation. Comparing the control and study subjects with the same TSP, means of α-angle showed significant difference, P=0.005.Conclusion: A large portion of hallux valgus patients had the first metatarsal pronation, which was positive correlated to TSP, IMA, and DMAA, and did not correlated to HVA and Smith grading. TSP is a useful predicting factor to α-angle changing. Level of Evidence: Level Ⅲ，Retrospective Cohort study

The Assessment of First Metatarsal Rotation in the Normal Adult Population Using Weightbearing Computed Tomography

2021 ◽  
pp. 107110072110151
Author(s):  
Ali-Asgar Najefi ◽  
Amit Zaveri ◽  
Mohammad Khalid Alsafi ◽  
Karan Malhotra ◽  
Shelain Patel ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Hallux Valgus ◽  
Normal Population ◽  
Intraclass Correlation ◽  
Normal Range ◽  
Hindfoot Alignment ◽  
First Metatarsal ◽  
Small Series ◽  
Metatarsal Angle ◽  
Α Angle

Background: The importance of the rotational profile of the first metatarsal is increasingly recognized in the surgical planning of hallux valgus. However, rotation in the normal population has only been measured in small series. We aimed to identify the normal range of first metatarsal rotation in a large series using weightbearing computed tomography (WBCT). Methods: WBCT scans were retrospectively analyzed for 182 normal feet (91 patients). Hallux valgus angle, intermetatarsal angle, anteroposterior/lateral talus–first metatarsal angle, calcaneal pitch, and hindfoot alignment angle were measured using digitally reconstructed radiographs. Patients with abnormal values for any of these measures and those with concomitant pathology, previous surgery, or hallux rigidus were excluded. Final assessment was performed on 126 feet. Metatarsal pronation (MPA) and α angles were measured on standardized coronal computed tomography slices. Pronation was recorded as positive. Intraobserver and interobserver reliability were assessed using intraclass correlation coefficients (ICCs). Results: Mean MPA was 5.5 ± 5.1 (range, –6 to 25) degrees, and mean α angle was 6.9 ± 5.5 (range, –5 to 22) degrees. When considering the normal range as within 2 standard deviations of the mean, the normal range identified was −5 to 16 degrees for MPA and −4 to 18 degrees for α angle. Interobserver and intraobserver reliability were excellent for both MPA (ICC = 0.80 and 0.97, respectively) and α angle (ICC = 0.83 and 0.95, respectively). There was a moderate positive correlation between MPA and α angle (Pearson coefficient 0.68, P < .001). Conclusion: Metatarsal rotation is variable in normal feet. Normal MPA can be defined as less than 16 degrees, and normal α angle can be defined as less than 18 degrees. Both MPA and α angle are reproducible methods for assessing rotation. Further work is needed to evaluate these angles in patients with deformity and to determine their significance when planning surgical correction of hallux valgus. Level of Evidence: Level III, retrospective comparative study.

First Metatarsal Rotation in Hallux Valgus Deformity

2021 ◽  
Vol 42 (4) ◽  
pp. 510-522
Author(s):  
Jesse Steadman ◽  
Alexej Barg ◽  
Charles L. Saltzman
Keyword(s):  
Hallux Valgus ◽  
Potential Role ◽  
Axial Rotation ◽  
Valgus Deformity ◽  
Measurement Methods ◽  
Advanced Imaging ◽  
Level Of Evidence ◽  
First Metatarsal ◽  
Hallux Valgus Deformity ◽  
Biplanar Radiographs

Rotation of the first metatarsal (M1) as a potential etiological factor of hallux valgus (HV) deformity was described relatively early in the description of HV pathoanatomy. However, because biplanar radiographs have been the standard method for imaging HV, clinicians primarily developed measurement methods and corrective operations confined to 2 dimensions, medial-lateral and inferior-superior. Recently, as our understanding of HV pathoanatomy has further developed, aided in part by advanced imaging technology, M1 rotation about its axis (“axial rotation”) and its implications for HV deformity and treatment has reemerged. The goal of this review is to summarize M1 rotation in HV from a historical perspective, to present the current understanding of its potential role in the etiology/pathogenesis of HV, and to summarize relevant imaging and operative considerations with respect to M1 rotation. Level of Evidence: Level III, systematic review.

scholarly journals Ultraviolet-C as a Viable Reprocessing Method for Disposable Masks and Filtering Facepiece Respirators

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 801
Author(s):  
Talita Nicolau ◽  
Núbio Gomes Filho ◽  
Andrea Zille
Keyword(s):  
Literature Review ◽  
Systematic Literature Review ◽  
Personal Protective Equipment ◽  
State Of The Art ◽  
Protective Equipment ◽  
Multiple Methods ◽  
Ultraviolet C ◽  
Single Use ◽  
Uv C ◽  
New Strategies

In normal conditions, discarding single-use personal protective equipment after use is the rule for its users due to the possibility of being infected, particularly for masks and filtering facepiece respirators. When the demand for these protective tools is not satisfied by the companies supplying them, a scenario of shortages occurs, and new strategies must arise. One possible approach regards the disinfection of these pieces of equipment, but there are multiple methods. Analyzing these methods, Ultraviolet-C (UV-C) becomes an exciting option, given its germicidal capability. This paper aims to describe the state-of-the-art for UV-C sterilization in masks and filtering facepiece respirators. To achieve this goal, we adopted a systematic literature review in multiple databases added to a snowball method to make our sample as robust as possible and encompass a more significant number of studies. We found that UV-C’s germicidal capability is just as good as other sterilization methods. Combining this characteristic with other advantages makes UV-C sterilization desirable compared to other methods, despite its possible disadvantages.

scholarly journals Digital Storytelling in Older Adults With Typical Aging, and With Mild Cognitive Impairment or Dementia: A Systematic Literature Review

2021 ◽  
pp. 073346482110154
Author(s):  
Adriana Maria Rios Rincon ◽  
Antonio Miguel Cruz ◽  
Christine Daum ◽  
Noelannah Neubauer ◽  
Aidan Comeau ◽  
...  
Keyword(s):  
Older Adults ◽  
Cognitive Impairment ◽  
Mild Cognitive Impairment ◽  
Literature Review ◽  
Systematic Literature Review ◽  
Digital Storytelling ◽  
Level Of Evidence ◽  
Form Of Life ◽  
Self Confidence ◽  
Care Partners

The rates of dementia are on the rise as populations age. Storytelling is commonly used in therapies for persons living with dementia and can be in the form of life review, and reminiscence therapy. A systematic literature review was conducted to examine the range and extent of the use of digital technologies for facilitating storytelling in older adults and their care partners, and to identify the processes and methods, the technologies used and their readiness levels, the evidence, and the associated outcomes. Eight electronic databases were searched: Medline, EMBASE, PsycINFO, CINAHL, Abstracts in Social Gerontology, ERIC, Web of Science, and Scopus. We included 34 studies. Mild cognitive impairment or dementia represented over half of medical conditions reported in the studies. Overall, our findings indicate that the most common use of digital storytelling was to support older adults’ memory, reminiscence, identity, and self-confidence; however, the level of evidence of its effectiveness was low.

scholarly journals First-Tarsometatarsal Joint Alignment After First-Metatarsophalangeal Joint Arthrodesis for Hallux Valgus

2021 ◽  
Vol 6 (2) ◽  
pp. 247301142110085
Author(s):  
Christopher Traynor ◽  
James Jastifer
Keyword(s):  
Hallux Valgus ◽  
Case Series ◽  
Metatarsophalangeal Joint ◽  
Retrospective Case ◽  
Level Of Evidence ◽  
First Metatarsophalangeal Joint ◽  
First Metatarsal ◽  
Metatarsal Angle ◽  
Medial Cuneiform ◽  
Radiographic Alignment

Background: Instability of the first-tarsometatarsal (TMT) joint has been proposed as a cause of hallux valgus. Although there is literature demonstrating how first-TMT arthrodesis affects hallux valgus, there is little published on how correction of hallux valgus affects the first-TMT joint alignment. The purpose of this study was to determine if correction of hallux valgus impacts the first-TMT alignment and congruency. Improvement in alignment would provide evidence that hallux valgus contributes to first-TMT instability. Our hypothesis was that correcting hallux valgus angle (HVA) would have no effect on the first-TMT alignment and congruency. Methods: Radiographs of patients who underwent first-MTP joint arthrodesis for hallux valgus were retrospectively reviewed. The HVA, 1-2 intermetatarsal angle (IMA), first metatarsal–medial cuneiform angle (1MCA), medial cuneiform–first metatarsal angle (MC1A), relative cuneiform slope (RCS), and distal medial cuneiform angle (DMCA) were measured and recorded for all patients preoperatively and postoperatively. Results: Of the 76 feet that met inclusion criteria, radiographic improvements were noted in HVA (23.6 degrees, P < .0001), 1-2 IMA (6.2 degrees, P < .0001), 1MCA (6.4 degrees, P < .0001), MC1A (6.5 degrees, P < .0001), and RCS (3.3 degrees, P = .001) comparing preoperative and postoperative radiographs. There was no difference noted with DMCA measurements (0.5 degrees, P = .53). Conclusion: Our findings indicate that the radiographic alignment and subluxation of the first-TMT joint will reduce with isolated treatment of the first-MTP joint. Evidence suggests that change in the HVA can affect radiographic alignment and subluxation of the first-TMT joint. Level of Evidence: Level IV, retrospective case series.

Radiographic Impact of Lapidus, Proximal Lateral Closing Wedge Osteotomy, and Suture Button Procedures on First Ray Length and Dorsiflexion for Hallux Valgus

2020 ◽  
Vol 41 (8) ◽  
pp. 964-971 ◽  
Author(s):  
Ian M. Foran ◽  
Nasima Mehraban ◽  
Stephen K. Jacobsen ◽  
Daniel D. Bohl ◽  
Johnny Lin ◽  
...  
Keyword(s):  
Hallux Valgus ◽  
Wedge Osteotomy ◽  
Level Of Evidence ◽  
Closing Wedge Osteotomy ◽  
First Metatarsal ◽  
Suture Button ◽  
Closing Wedge ◽  
Radiographic Measurements ◽  
Valgus Angle ◽  
First Ray

Background: Shortening and dorsiflexion of the first metatarsal are known potential side effects of metatarsal osteotomies for hallux valgus (HV) with the potential to cause transfer metatarsalgia. We compared the effect of the first tarsometatarsal joint arthrodesis (Lapidus procedure), proximal lateral closing wedge osteotomy (PLCWO), and intermetatarsal suture button fixation procedures on the length and dorsiflexion of the first ray. Methods: We retrospectively evaluated 105 feet in 99 patients with 30 weeks of follow-up. The average age was 54 years. Seventy-four feet had a Lapidus procedure, 12 had a PLCWO, and 19 had intermetatarsal suture button fixation. Digital radiographic measurements were made for the pre- and postoperative hallux valgus angle (HVA) and intermetatarsal angle (IMA), absolute and relative shortening of the first ray, and dorsiflexion. Results: Preoperative HVA and IMA did not differ between treatment groups ( P > .05 for each). Similar corrections of HVA (30.5-13.5 degrees) were achieved between all groups ( P > .05). The IMA was improved more in the Lapidus group (14.3-6.5 degrees) compared with the suture button fixation group (14.2-8.1 degrees) ( P = .045). There were significant differences in the change in absolute first cuneiform–metatarsal length (FCML) between the Lapidus (–1.6 mm), PLCWO (–2.3 mm), and intermetatarsal suture button fixation (+1.9 mm) procedure ( P = .004). There were also significant differences in relative first metatarsal shortening between the Lapidus (0.1 mm relative shortening), PLCWO (1.1 mm relative shortening), and intermetatarsal suture button fixation (1.3 mm lengthening) procedure ( P < .001). The average dorsiflexion differed between the Lapidus (1.8 degrees) and suture button fixation (0.4 degrees) groups ( P = .004). Conclusion: Intermetatarsal suture button fixation relatively lengthened the first ray, the Lapidus procedure maintained length, and the PLCWO relatively and absolutely shortened it. Dorsiflexion may be higher with the Lapidus and osteotomy procedures. Level of Evidence: Level III, retrospective comparative series.

Sign in / Sign up

Export Citation Format

Share Document