Combined effect of surface roughness and pressure-dependent viscosity over couple-stress squeeze film lubrication between circular stepped plates

2018 ◽  
Vol 232 (5) ◽  
pp. 525-534 ◽  
Author(s):  
BN Hanumagowda ◽  
BT Raju ◽  
J Santhosh Kumar ◽  
KR Vasanth
Keyword(s):  
Surface Roughness ◽  
Carrying Capacity ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
One Dimensional ◽  
Pressure Dependent Viscosity ◽  
Load Carrying ◽  
Dependent Viscosity ◽  
Film Lubrication ◽  
Effect Of Surface

In this paper, the effect of surface roughness and pressure-dependent viscosity over couple-stresses squeeze film lubrication between circular stepped plates is studied. The modified average Reynolds equation is derived for the one-dimensional roughness structures, namely the radial roughness pattern and azimuthal roughness pattern. Modified equations for the nondimensional pressure, load-carrying capacity, and nondimensional squeeze film time are obtained. Also, the obtained results of our study for some special cases are compared with the previously published smooth surface case, and the results are found to be in very good agreement. It is observed that, one-dimensional azimuthal (radial) roughness pattern on the rough circular stepped plate increases (decreases) the load-carrying capacity and the squeeze film time as compared to the smooth case.

Stochastic Reynolds equation for the combined effects of piezo-viscous dependency and squeeze-film lubrication of micropolar fluids on rough porous circular stepped plates

2021 ◽  
pp. 135065012110224
Author(s):  
Hanumagowda Bannihalli Naganagowda ◽  
Sreekala Cherkkarathandayan Karappan
Keyword(s):  
Carrying Capacity ◽  
Stochastic Approach ◽  
Squeeze Film ◽  
Closed Form Expression ◽  
Load Carrying Capacity ◽  
Micropolar Fluids ◽  
Pressure Dependent Viscosity ◽  
Load Carrying ◽  
Dependent Viscosity ◽  
Film Characteristics

The aim of this paper is to presents a theoretical analysis on squeeze-film characteristics of a rough porous circular stepped plate in the vicinity of pressure-dependent viscosity and lubrication by micropolar fluids. A closed-form expression for non-dimensional pressure, load, and squeezing time is derived based on Eringen’s theory, Darcy’s equation, and Christensen’s stochastic approach. Results indicate that the effects of pressure-dependent viscosity, surface roughness, and micropolar fluids play an important role in increasing the load-carrying capacity and squeezing time, whereas the presence of porous media decreases the load-carrying capacity and squeezing time of the rough porous circular stepped plates.

scholarly journals MULTIGRID METHOD FOR THE SOLUTION OF COMBINED EFFECT OF VISCOSITY VARIATION AND SURFACE ROUGHNESS ON THE SQUEEZE FILM LUBRICATION OF JOURNAL BEARINGS

2017 ◽  
Vol 46 (1) ◽  
pp. 1-8
Author(s):  
Vishwanath B. Awati ◽  
Ashwini Kengangutti ◽  
Mahesh Kumar N.
Keyword(s):  
Surface Roughness ◽  
Carrying Capacity ◽  
Micropolar Fluid ◽  
Reynolds Equation ◽  
Multigrid Method ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Viscosity Variation ◽  
Film Lubrication

The paper presents, the multigrid method for the solution of combined effect of surface roughness and viscosity variation on the squeeze film lubrication of a short journal bearing operating with micropolar fluid. The modified Reynolds equation which incorporates the variation of viscosity in micropolar fluid is analysed using Multigrid method. The governing modified Reynolds equation is solved numerically for the fluid film pressure and bearing characteristics viz. load carrying capacity and squeeze time. The analysis of the results predicts that, the viscosity variation factor decreases the load carrying capacity and squeeze film time, resulting into a longer bearing life. The results are compared with the corresponding analytical solutions.

scholarly journals EFFECT OF SURFACE ROUGHNESS ON CHARACTERISTICS OF MAGNETIC FLUID BASED SQUEEZE FILM BETWEEN POROUS CIRCULAR PLATES

2020 ◽  
Vol 14 (1) ◽  
pp. 90-98
Author(s):  
P. L. Thakkar ◽  
H. C. Patel
Keyword(s):  
Surface Roughness ◽  
Magnetic Fluid ◽  
Carrying Capacity ◽  
Type Equation ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Circular Plates ◽  
Load Carrying ◽  
Better Than ◽  
Effect Of Surface

The effect of surface roughness on characteristics of magnetic fluid based squeeze film between porous circular plates is hypothetically analysed. The pressure distribution is obtained by solving concern Reynolds type equation with suitable boundary conditions and the result is utilized to obtain load carrying capacity. It is concluded that the load carrying capacity increases with increasing magnetization, while load carrying capacity decreases due to the standard deviation. It is observed that the negatively skewed roughness and negative mean increase the load carrying capacity. It is also observed that the magnetic fluid lubricant improves the performance of a bearing system, thereby, suggesting that the performance of the bearing with magnetic fluid lubricant is better than the conventional lubricant.

Effect of concentration dependence of viscosity on squeeze film lubrication

2020 ◽  
Vol 75 (6) ◽  
pp. 533-542
Author(s):  
Poosan Muthu ◽  
Vanacharla Pujitha
Keyword(s):  
Carrying Capacity ◽  
Iterative Procedure ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Convection Diffusion ◽  
Load Carrying ◽  
Newtonian Viscous Fluid ◽  
Nicolson Scheme ◽  
Human Joint ◽  
Film Lubrication

AbstractThe influence of concentration of solute particles on squeeze film lubrication between two poroelastic surfaces has been analyzed using a mathematical model. Newtonian viscous fluid is considered as a lubricant whose viscosity varies linearly with concentration of suspended solute particles. Convection-diffusion model is proposed to study the concentration of solute particles and is solved using finite difference method of Crank–Nicolson scheme. An iterative procedure is used to get the solution for concentration, pressure and velocity components in film region. It has been observed that load carrying capacity decreases as the concentration of solute particles in the fluid film decreases. Further, the concentration of suspended solute particles decreases as the permeability of the poroelastic plate increases and these results may be useful in understanding the mechanism of human joint.

Numerical investigation of squeeze film lubrication on bioinspired hexagonal patterned surface

2022 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Binbin Su ◽  
Xianghe Zou ◽  
Lirong Huang
Keyword(s):  
Flow Rate ◽  
Carrying Capacity ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Two Dimensional ◽  
Working Mechanism ◽  
Content Type ◽  
Patterned Surface ◽  
Load Carrying ◽  
Film Lubrication

Purpose This paper aims to investigate the squeeze film lubrication properties of hexagonal patterned surface inspired by the epidermis structure of tree frog’s toe pad and numerically explore the working mechanism of hexagonal micropillar during the acquisition process of high adhesive and friction for wet contacts. Design/methodology/approach A two-dimensional elastohydrodynamic numerical model is employed for the squeezing contacts. The pressure distribution, load carrying capacity and liquid flow rate of the squeeze film are obtained through a simultaneous solution of the two-dimensional Reynolds equation and elasticity deformation equations. Findings Higher pressure is found to be longitudinally distributed across individual hexagonal pillar, with pressure peak emerging at the center of hexagonal pillar. Expanding the area density and shrinking the channel depth or initial film thickness will improve the magnitude of squeezing pressure. Relatively lower pressure is generated inside interconnected channels, which reduces the load carrying capacity of the squeeze film. Meanwhile, the introduction of microchannel is revealed to downscale the total mass flow rate of squeezing contacts. Originality/value This paper provides a good proof for the working mechanism of surface microstructures during the acquisition process of high adhesive and friction for wet contacts.

scholarly journals Combined Effect of Slip Velocity and Surface Roughness on a Magnetic Squeeze Film for a Sphere in a Spherical Seat

2015 ◽  
Vol 2015 ◽  
pp. 1-9
Author(s):  
G. M. Deheri ◽  
Sejal J. Patel
Keyword(s):  
Surface Roughness ◽  
Slip Velocity ◽  
Type Equation ◽  
Velocity Slip ◽  
Performance Characteristics ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Slip Model ◽  
Load Carrying ◽  
Effect Of Surface

This investigation analyzes the performance of a magnetic fluid based squeeze film for a sphere in a rough spherical seat with slip velocity. The slip model of Beavers and Joseph has been deployed to study the effect of velocity slip while the stochastic model of Christensen and Tonder has been used to calculate the effect of surface roughness. The concerned statistically averaged Reynolds’ type equation is solved to derive the pressure distribution which results in the calculation of load carrying capacity. The results presented in graphical forms confirm that the adverse effect of slip velocity can be overcome to a large extent at least in the case of negatively skewed roughness. However, lower values of slip may be preferred for enhancing the performance characteristics of the bearing system. Besides, variance (−ve) provides a little support to improve the performance characteristics.

scholarly journals Effect of Surface Roughness and Viscosity-Pressure Dependency on the Couple Stress Squeeze Film Characteristics of Parallel Circular Plates

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Neminath Bhujappa Naduvinamani ◽  
Siddangouda Apparao ◽  
Ayyappa G. Hiremath
Keyword(s):  
Surface Roughness ◽  
Carrying Capacity ◽  
Couple Stress ◽  
Reynolds Equation ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Circular Plates ◽  
Pressure Dependency ◽  
Load Carrying ◽  
Film Characteristics

Combined effects of surface roughness and viscosity-pressure dependency on the couple stress squeeze film characteristics of parallel circular plates are presented. On the basis of Christensen’s stochastic theory, two types of one-dimensional roughness structures, namely, the radial roughness and azimuthal roughness patterns, are considered and the stochastic modified Reynolds equation for these two types of roughness patterns is derived for Stokes couple stress fluid by taking into account variation of viscosity with pressure. The standard perturbation technique is employed to solve the averaged Reynolds equation and closed form expressions for the mean fluid film pressure, load carrying capacity, and squeeze film time are obtained. It is found that the effects of couple stresses and viscosity-pressure dependency are to increase the load carrying capacity, and squeeze film time for both types of roughness patterns. The effect of azimuthal (radial) roughness pattern is to increase (decrease) these squeeze film characteristics as compared to the corresponding smooth case.

Effect of surface roughness on magneto-hydrodynamic squeeze-film characteristics between a sphere and a porous plane surface

2014 ◽  
Vol 66 (3) ◽  
pp. 365-372 ◽  
Author(s):  
Neminath Bhujappa Naduvinamani ◽  
Mareppa Rajashekar
Keyword(s):  
Surface Roughness ◽  
Response Time ◽  
Carrying Capacity ◽  
Hydrodynamic Lubrication ◽  
Plane Surface ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Content Type ◽  
Load Carrying ◽  
Film Characteristics

Purpose – The purpose of this article is to analyse the effects of surface roughness on the magneto-hydrodynamic (MHD) squeeze-film characteristics between a sphere and a porous plane surface, which have not been studied so far. Design/methodology/approach – The analytical model takes into account the effect of porosity by assuming that the flow in the porous matrix obeys modified Darcy's law. The stochastic MHD Reynold's type equation is derived by using the Christensen's stochastic method developed for hydrodynamic lubrication of rough surfaces. Two types of one-dimensional surface roughness (radial and azimuthal) patterns are considered. Findings – The expressions for the mean MHD squeeze-film pressure and mean load-carrying capacity are obtained numerically. The results are shown graphically for selected representative parametric values. It is found that the response time increases significantly for the MHD case as compared to the corresponding non-conducting lubricants. The effect of roughness parameter is to increase/decrease the load-carrying capacity and the response time for azimuthal/radial roughness patterns as compared to the smooth case. Also, the effect of porous parameter is to decrease the load-carrying capacity and response time as compared to the solid case. Originality/value – In this paper, an attempt has been made to analyse the combined effects of surface roughness and permeability on the MHD squeeze-film characteristics between a sphere and a plane surface.

Sign in / Sign up

Export Citation Format

Share Document