Investigation of the mechanical properties of concrete containing recycled aggregate and scrap crumb rubber and polypropylene fibers

2020 ◽  
pp. 147776062097750
Author(s):  
Moein Khoshroo ◽  
Ali Akbar Shirzadi Javid ◽  
Nima Rajabi Bakhshandeh ◽  
Mohamad Shalchiyan
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Polypropylene Fiber ◽  
Crumb Rubber ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Fine Aggregate ◽  
Mixture Ratio ◽  
Coarse Aggregates

In this study, the effect of using crumb rubber and recycled aggregates on the mechanical properties of concrete has been evaluated as areplacement of fine and coarse aggregates In order to add the admixtures and evaluate their combined effect, 20 different types of concrete mixture ratio were prepared. The results indicated that in those samples containing crumb rubber and recycled aggregates the compressive strength is reduced and adding fiber up to 0.1%. to these concrete samples can improve the compressive strength Also, the tensile strength of the samples mixed with crumb rubber and recycled aggregates were decreased, and with the addition of propylene fiber up to 0.4%. the tensile strength slightly increased Moreover by adding the crumb rubber to the samples the elasticity modulus was reduced but by adding fiber to samples about 0.1% and 0.2.% the modulus of elasticity of concrete in all samples were increased. According to the results, it can be said that using the combination of 5% of crumb rubber as a replacement of fine aggregate, and the combination of 35% of recycled aggregates as a replacement of coarse aggregate, and also by adding 0.1% polypropylene fiber in volumetric percentage of concrete along with adding 7% of micro silica as a replacement of cement led to the best effect on the mechanical properties of concrete.

scholarly journals Effect of Design Parameters on Compressive and Split Tensile Strength of Self-Compacting Concrete with Recycled Aggregate: An Overview

2021 ◽  
Vol 11 (13) ◽  
pp. 6028
Author(s):  
P. Jagadesh ◽  
Andrés Juan-Valdés ◽  
M. Ignacio Guerra-Romero ◽  
Julia M. Morán-del Morán-del Pozo ◽  
Julia García-González ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Design Parameters ◽  
Fine Aggregate ◽  
Self Compacting Concrete ◽  
Split Tensile Strength ◽  
Coarse Aggregates ◽  
Fine Aggregates

One of the prime objectives of this review is to understand the role of design parameters on the mechanical properties (Compressive and split tensile strength) of Self-Compacting Concrete (SCC) with recycled aggregates (Recycled Coarse Aggregates (RCA) and Recycled Fine Aggregates (RFA)). The design parameters considered for review are Water to Cement (W/C) ratio, Water to Binder (W/B) ratio, Total Aggregates to Cement (TA/C) ratio, Fine Aggregate to Coarse Aggregate (FA/CA) ratio, Water to Solid (W/S) ratio in percentage, superplasticizer (SP) content (kg/cu.m), replacement percentage of RCA, and replacement percentage of RFA. It is observed that with respect to different grades of SCC, designed parameters affect the mechanical properties of SCC with recycled aggregates.

scholarly journals An Experimental Research On Partial Replacement Of Coarse Aggregate with Recycled Aggregate and Fine Aggregate with Granite Powder

2019 ◽  
Vol 8 (9S2) ◽  
pp. 72-77
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Age Group ◽  
Split Tensile Strength ◽  
Coarse Aggregates ◽  
Granite Powder

Now a days increase in population increases the demand of concrete for construction purpose and Aggregates are the important constituents in concrete.Re-use of demoliation waste avoids the problem of waste disposal and is also helpful in reducing the gap between demand and supply of fresh aggregates. This research deals with partial replacement of natural coarse aggregates (NCA) with recycled coarse aggregates (RCA) of age group 30 years and 35 years in different proportions like 20%, 30%, 40% . For this, M20 grade of concrete is adopted. Curing of specimens were done for 7days and 28 days to attain the maximum strengths. Partial replacement of fine aggregate with Granite powder at 5%, 10%, 15% were done to reduce the waste percentage as well to gain more strength. After casting the specimens of RCA with Granite powder replacement, curing was done and the specimens were tested for compressive and tensile strengths. Obtained results of compressive and tensile strengths of RCA concrete mix were compared with conventional concrete. In this direction, an experimental investigation of compressive and tensile strength was undertaken to use RCA as a partial replacement in concrete. It was observed that the concrete with recycled aggregates of 30years and 35years age group achieved maximum compressive strength of 29.03 N/mm2 , 28.96 N/mm2 and tensile strength of 11.91 N/mm2 , 10.34 N/mm2 were obtained at 40%replacement of RCA respectively. It is found that the compressive strength and Split tensile strength of RAC with copper slag was increased 8.20% and 2.90% when compared with the RAC.

scholarly journals Effect of Recycled Coarse Aggregates in Properties of Concrete

2008 ◽  
Vol 3 (4) ◽  
pp. 130-137 ◽  
Author(s):  
R Kumutha ◽  
K Vijai
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Modulus Of Elasticity ◽  
Coarse Aggregate ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Split Tensile Strength ◽  
Coarse Aggregates ◽  
The Cost

The properties of concrete containing coarse recycled aggregates were investigated. Laboratory trials were conducted to investigate the possibility of using recycled aggregates from the demolition wastes available locally as the replacement of natural coarse aggregates in concrete. A series of tests were carried out to determine the density, compressive strength, split tensile strength, flexural strength and modulus of elasticity of concrete with and without recycled aggregates. The water cement ratio was kept constant for all the mixes. The coarse aggregate in concrete was replaced with 0%, 20%, 40%, 60%, 80% and 100% recycled coarse aggregates. The test results indicated that the replacement of natural coarse aggregates by recycled aggregates up to 40% had little effect on the compressive strength, but higher levels of replacement reduced the compressive strength. A replacement level of 100% causes a reduction of 28% in compressive strength, 36% in split tensile strength and 50% in flexural strength. For strength characteristics, the results showed a gradual decrease in compressive strength, split tensile strength, flexural strength and modulus of elasticity as the percentage of recycled aggregate used in the specimens increased. 100% replacement of natural coarse aggregate by recycled aggregate resulted in 43% savings in the cost of coarse aggregates and 9% savings in the cost of concrete.

On Properties of Recycled Coarse Aggregate from Repeatedly Recycling Waste Concrete

2011 ◽  
Vol 368-373 ◽  
pp. 2185-2188
Author(s):  
Ping Hua Zhu ◽  
Xin Jie Wang ◽  
Jin Cai Feng
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Fine Aggregate ◽  
Recycled Coarse Aggregate ◽  
Coarse Aggregates ◽  
Recycled Fine Aggregate ◽  
Waste Concrete

The properties of recycled coarsee aggregates from repeatedly recycling waste concrete were determined. In this study, five series of concrete mixtures using coarse and fine natural aggregates were prepared, which have the same objective slump value from 35mm to 50mm and different compressive strengths ranging from 25MPa to 60 MPa. These five concretes were crushed, sieved, washed with water, hot treatmented at 300°C before they were used as recycled aggregates. After that, recycled aggregate concrete (RAC) was produced with an objectively compressive strength of 30MPa, in which the recycled coarse aggregate was used as 30%, 70% and 90% replacements of natural coarse aggregate and recycled fine aggregate as 10%, 20%, and 30% replacements of natural fine aggregate. After that, these recycled concretes were used as second recycled aggregates to produce RAC with the same objectively compressive strength of 30MPa. The physical properties of coarse aggregates including apparent density, water absorption, attached mortar content and crushing value were tested and their mineral characteristics were analyzed. The results showed that the quality of recycled coarse aggregates from twicely recycling waste concrete reached the requirements from structural concrete.

scholarly journals Study of the Compressive Strength of Concrete Using Marble, Granite and Recycled Aggregates with Polypropylene Fiber

2019 ◽  
Vol 5 (12) ◽  
pp. 7-11
Author(s):  
Rajiv Sonwane ◽  
Pushpendra Kumar Kushwaha ◽  
Jiji M Thomas
Keyword(s):  
Compressive Strength ◽  
Polypropylene Fiber ◽  
Environmental Problems ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Experimental Investigations ◽  
Recycle Aggregate ◽  
Coarse Aggregates ◽  
Open Land ◽  
Compressive Strength Of Concrete

Marble Industry produces large amount of waste during mining and processing stages. This waste is dumped on to open land which creates a lot of environmental problems We get recycle aggregate from the old dumped structures and buildings. The main objective of this study was utilization of marble, granite and recycled aggregate waste with polypropylene fiber as a replacement for conventional natural coarse aggregates in concrete. Experimental investigations were carried out to examine the feasibility of use of marble, granite and recycled aggregates waste as coarse aggregates in concrete. Conventional natural coarse aggregates was fully replacement by marble in different percentages 0-60% , granite 0-30% and recycle aggregates 0-40% with polypropylene fiber less than 1% by weight. The concrete formulations were prepared with a constant water.

scholarly journals Evaluation of Interlocking Brick

2021 ◽  
Vol 9 (8) ◽  
pp. 3002-3008
Author(s):  
C. Mounika
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Crumb Rubber ◽  
Strength Test ◽  
Fine Aggregate ◽  
Coir Fiber ◽  
Split Tensile Strength ◽  
Rubber Tire

Abstract: The main aim of this project is to evaluate mechanical properties of interlocking bricks using coir fiber powder as a substitute of cement and rubber tire waste as a substitute of fine aggregate (sand) with varying percentages of 0%, 1%, 2% & 3% and 0%, 5%, 10% & 15% in concrete and to help in solving environmental problem produced from disposing of waste tires and coir husk partially. Additionally fly ash was also added with varying percentages of 5%, 10% and 15% as a substitute to cement in a concrete mix. Several laboratory tests such as compressive strength test, flexural strength test, split tensile strength test, water absorption test and density of concrete etc., were conducted on hardened concrete specimen to achieve the optimum usage of crumb rubber tire waste and coir fiber powder in mix proportion of concrete. It is found that the maximum compressive strength value of coir fiber based crumb rubber interlocking brick was obtained at 1%CF + 5%FA + 5%CR, flexural strength value and split tensile strength value of coir fiber based crumb rubber concrete block was obtained at 1%CF + 5%FA + 5%CR. From the final conclusion or outcome of the project, optimum usage of coir fiber powder is 3% and crumb rubber is 5%. Keywords: coir fiber powder, crumb rubber tire waste, mechanical properties, interlocking bricks & optimum usage.

scholarly journals Study of the Compressive Strength of Concrete Using Marble, Granite and Recycled Aggregates with Polypropylene Fiber

2019 ◽  
Vol 5 (12) ◽  
pp. 7-11
Author(s):  
Rajiv Sonwane ◽  
Pushpendra Kumar Kushwaha ◽  
Jiji M Thomas
Keyword(s):  
Compressive Strength ◽  
Polypropylene Fiber ◽  
Environmental Problems ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Experimental Investigations ◽  
Recycle Aggregate ◽  
Coarse Aggregates ◽  
Open Land ◽  
Compressive Strength Of Concrete

Marble Industry produces large amount of waste during mining and processing stages. This waste is dumped on to open land which creates a lot of environmental problems We get recycle aggregate from the old dumped structures and buildings. The main objective of this study was utilization of marble, granite and recycled aggregate waste with polypropylene fiber as a replacement for conventional natural coarse aggregates in concrete. Experimental investigations were carried out to examine the feasibility of use of marble, granite and recycled aggregates waste as coarse aggregates in concrete. Conventional natural coarse aggregates was fully replacement by marble in different percentages 0-60% , granite 0-30% and recycle aggregates 0-40% with polypropylene fiber less than 1% by weight. The concrete formulations were prepared with a constant water.

scholarly journals Study of the Compressive Strength of Concrete Using Marble, Granite and Recycled Aggregates with Polypropylene Fiber

2019 ◽  
Vol 5 (6) ◽  
pp. 6
Author(s):  
Rajiv Sonwane ◽  
Pushpendra Kumar Kushwaha ◽  
Jiji M Thomas
Keyword(s):  
Compressive Strength ◽  
Polypropylene Fiber ◽  
Environmental Problems ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Experimental Investigations ◽  
Recycle Aggregate ◽  
Coarse Aggregates ◽  
Open Land ◽  
Compressive Strength Of Concrete

Marble Industry produces large amount of waste during mining and processing stages. This waste is dumped on to open land which creates a lot of environmental problems We get recycle aggregate from the old dumped structures and buildings. The main objective of this study was utilization of marble, granite and recycled aggregate waste with polypropylene fiber as a replacement for conventional natural coarse aggregates in concrete. Experimental investigations were carried out to examine the feasibility of use of marble, granite and recycled aggregates waste as coarse aggregates in concrete. Conventional natural coarse aggregates was fully replacement by marble in different percentages 0-60% , granite 0-30% and recycle aggregates 0-40% with polypropylene fiber less than 1% by weight. The concrete formulations were prepared with a constant water.

scholarly journals Mechanical characteristics of concrete containing basalt fiber and recycled aggregate

2021 ◽  
Vol 889 (1) ◽  
pp. 012044
Author(s):  
Hemant ◽  
Rachit Sharma ◽  
Ankush Thakur ◽  
Tiwary Kumar Aditya
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Mechanical Characteristics ◽  
Basalt Fiber ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Split Tensile Strength ◽  
Coarse Aggregates ◽  
Concrete Production ◽  
Negative Effect

Abstract The potential of construction waste as an alternative to the constituents of concrete has been generally examined to demonstrate their utility and ensure the climate and/or environment of its otherwise ill effects. The mechanical characteristics of concrete are investigated to comprehend its behaviour under compressive, tensile, and flexural loads. This experimental study investigates the effect of supplanting proportions of river aggregates with waste coarse aggregates in addition to the effect of basalt fiber additions on concrete mixes with (25 and 50%) substitutions of recycled waste coarse aggregates (RWCA). The workability of concrete mixes was negatively affected with recycled aggregates and/or basalt fiber inclusions. Using recycled aggregates with 25 and 50% replacements decreases the strength of concrete. On utilizing discrete proportions of basalt fiber with natural coarse aggregates, the strength was higher as compared to control mix however increasing the percentage of basalt fiber from 1% to 3% the compressive strength was reduced. On incorporating additions of basalt fiber with different proportions of RWCA, the strength of concrete was deteriorated as the percentage of fiber was increasing. For natural aggregates, the inclusion of fibers has negative effect on compressive strength however the tensile strength was increased with higher percentage of fibers. The inclusions of fibers to 25% recycled aggregate mixes, split tensile strength was much higher as compared to control mix. It was concluded that addition of basalt fibers provides a viable option to recycle recycled aggregate in concrete production.

scholarly journals Effect of Recycled Coarse Aggregate and Bagasse Ash on Two-Stage Concrete

Crystals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 556
Author(s):  
Muhammad Faisal Javed ◽  
Afaq Ahmad Durrani ◽  
Sardar Kashif Ur Rehman ◽  
Fahid Aslam ◽  
Hisham Alabduljabbar ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Coarse Aggregate ◽  
Construction Material ◽  
Strength Reduction ◽  
Recycled Aggregate ◽  
Two Stage ◽  
Conventional Concrete ◽  
Recycled Coarse Aggregate ◽  
Coarse Aggregates

Numerous research studies have been conducted to improve the weak properties of recycled aggregate as a construction material over the last few decades. In two-stage concrete (TSC), coarse aggregates are placed in formwork, and then grout is injected with high pressure to fill up the voids between the coarse aggregates. In this experimental research, TSC was made with 100% recycled coarse aggregate (RCA). Ten percent and twenty percent bagasse ash was used as a fractional substitution of cement along with the RCA. Conventional concrete with 100% natural coarse aggregate (NCA) and 100% RCA was made to determine compressive strength only. Compressive strength reduction in the TSC was 14.36% when 100% RCA was used. Tensile strength in the TSC decreased when 100% RCA was used. The increase in compressive strength was 8.47% when 20% bagasse ash was used compared to the TSC mix that had 100% RCA. The compressive strength of the TSC at 250 °C was also determined to find the reduction in strength at high temperature. Moreover, the compressive and tensile strength of the TSC that had RCA was improved by the addition of bagasse ash.

Sign in / Sign up

Export Citation Format

Share Document