Silica Nanoparticles to Polish Tooth Surfaces for Caries Prevention

2008 ◽  
Vol 87 (10) ◽  
pp. 980-983 ◽  
Author(s):  
R.M. Gaikwad ◽  
I. Sokolov

Although silica particles have been used for tooth polishing, polishing with nanosized particles has not been reported. Here we hypothesize that such polishing may protect tooth surfaces against the damage caused by cariogenic bacteria, because the bacteria can be easily removed from such polished surfaces. This was tested on human teeth ex vivo. The roughness of the polished surfaces was measured with atomic force microscopy (AFM). A considerably lower nanometer-scale roughness was obtained when silica nanoparticles were used to polish the tooth surfaces, as compared with conventional polishing pastes. Bacterial attachment to the dental surfaces was studied for Streptococcus mutans, the most abundant cariogenic bacteria. We demonstrated that it is easier to remove bacteria from areas polished with silica nanoparticles. The results demonstrate the advantage of using silica nanoparticles as abrasives for tooth polishing.

2009 ◽  
Vol 151 ◽  
pp. 197-202 ◽  
Author(s):  
Sirinrath Sirivisoot ◽  
Rajesh A. Pareta ◽  
Thomas J. Webster

Implant infection leading to revision surgery can be avoided by incorporating controllable antibiotic release from titanium (Ti) implant surfaces. In this study, penicillin/streptomycin (P/S) and dexamethasone (Dex) were successfully immobilized via electropolymerization within polypyrrole membranes coated on the surface of Ti, which is widely used in orthopedic applications. In vitro results showed that greater numbers of osteoblasts adhered on these polymer-coated substrates than on currently-used unmodified Ti. X-ray photoelectron spectroscopy was used to monitor and compare the reaction effectiveness and the yield of electropolymerization. Polypyrrole membranes conjugated with P/S and Dex, and then coated with PLGA, all possessed nanometer scale roughness, as analyzed by atomic force microscopy. In summary, this study demonstrated that drugs incorporated within electroactive polypyrrole membranes, whose release was controlled by applying voltages, supported osteoblast adhesion and could potentially fight bacterial infection.


2017 ◽  
Vol 68 (11) ◽  
pp. 2700-2703 ◽  
Author(s):  
Kamel Earar ◽  
Vasile Iulian Antoniac ◽  
Sorana Baciu ◽  
Simion Bran ◽  
Florin Onisor ◽  
...  

This study examined and compared surface of human dentine after acidic etching with hydrogen peroxide, phosphoric acid liquid and gel. Surface demineralization of dentin is necessary for a strong bond of adhesive at dental surface. Split human teeth were used. After application of mentioned substances at dentin level measures of the contact angle and surface morphology were employed. Surface morphology was analyzed with the help of scanning electron microscopy and atomic force microscopy. Liquid phosphoric acid yielded highest demineralization showing better hydrophobicity than the rest, thus having more contact surface. Surface roughness are less evident and formed surface micropores of 4 �m remained open after wash and air dry providing better adhesive canalicular penetration and subsequent bond.


Coatings ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 414 ◽  
Author(s):  
Divine Sebastian ◽  
Chun-Wei Yao ◽  
Ian Lian

Superhydrophobic coatings have shown tremendous improvement in the usability of metals such as aluminum. These coatings are capable of adding attractive features such as self-cleaning, anti-corrosion, and anti-biofouling to the array of diverse features that aluminum possesses, including lightweight and high ductility. For superhydrophobic surfaces, having considerable abrasion resistance is as important as achieving a high contact angle. In this work, two types of coatings have been prepared, each composed of functionalized silica nanoparticles along with polydimethylsiloxane (PDMS) dispersed in ethanol, and their superhydrophobicity and abrasion characteristics have been investigated. The same silica nanoparticles are present in each coating, but each has a different proportion of the PDMS base to its curing agent. The surface morphology of the coatings was studied with the aid of a scanning electron microscope (SEM) and an atomic force microscope (AFM). The surface chemical composition was characterized using an energy dispersive X-ray spectroscope (EDX). The prepared coatings were analyzed for their degree of superhydrophobicity, abrasion resistance and adhesion characteristics. In addition, atomic force microscopy was used to understand the adhesion characteristics of the coatings.


2019 ◽  
Vol 6 (9) ◽  
pp. 190915 ◽  
Author(s):  
Hanna E. Burton ◽  
Rachael Cullinan ◽  
Kyle Jiang ◽  
Daniel M. Espino

The aim of this study was to investigate the multiscale surface roughness characteristics of coronary arteries, to aid in the development of novel biomaterials and bioinspired medical devices. Porcine left anterior descending coronary arteries were dissected ex vivo , and specimens were chemically fixed and dehydrated for testing. Surface roughness was calculated from three-dimensional reconstructed surface images obtained by optical, scanning electron and atomic force microscopy, ranging in magnification from 10× to 5500×. Circumferential surface roughness decreased with magnification, and microscopy type was found to influence surface roughness values. Longitudinal surface roughness was not affected by magnification or microscopy types within the parameters of this study. This study found that coronary arteries exhibit multiscale characteristics. It also highlights the importance of ensuring consistent microscopy parameters to provide comparable surface roughness values.


Nanomedicine ◽  
2014 ◽  
Vol 9 (4) ◽  
pp. 393-406 ◽  
Author(s):  
Ruthger W van Zwieten ◽  
Stefania Puttini ◽  
Małgorzata Lekka ◽  
Guillaume Witz ◽  
Evelyne Gicquel-Zouida ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document