Ergonomic Design Considerations for Ultrasound Real-Time Scanners

1985 ◽  
Vol 1 (6) ◽  
pp. 251-254
Author(s):  
Thomas H. Shawker ◽  
Mary Ann Russell

The existing design of ultrasound real-time scanners is not satisfactory from the standpoint of operator comfort or efficient use. As currently configured, these units are cumbersome and fatiguing to use and require unnecessarily complex and time-consuming movements on the part of the operator. Redesigning ultrasound scanners so that they conform to accepted principles of ergonomics or human-factor engineering should make it possible to achieve increased efficiency and improved study quality.

Author(s):  
M A Nikitina ◽  
Y A Ivashkin

One of the main directions of statistics in sensory evaluation is an assessment of the dependence between experimental variables and measured characteristics. Statistical criteria are used to assess a degree of interaction between variables, a level of experimental effects, and allow accepting or rejecting hypothesis proposed. In sensory evaluation, people act as measurement instruments, and a variation associated with the human factor arises. This proves that the use of statistical methods is necessary. This article represents a network computer system for collection and evaluation of food sensory indicators based on the methods of rank correlation and multifactorial analysis of variance in real time. The article describes information technology of expert sensory evaluation of food quality by individual panelists and sensory panels regarding the indicators that are not measured by technical means of control, based on client-server network architecture. The software implementation of system for collecting and statistical processing of sensory data based on the principles of multifactorial analysis of variance in real-time mode makes it possible to evaluate the influence of the human factor on objectiveness and reliability of sensory evaluation results, as well as to visualize the data of expert scores by various expert panels.


2018 ◽  
Author(s):  
Ronit Shtrichman ◽  
Stefan Conrad ◽  
Kai Schimo ◽  
Ran Shachar ◽  
Ehud Machluf ◽  
...  

BACKGROUND Medication nonadherence is a major problem in health care, imposing poor clinical outcomes and a heavy financial burden on all stakeholders. Current methods of medication adherence assessment are severely limited: they are applied only periodically, do not relate to actual pill intake, and suffer from patient bias due to errors, misunderstanding, or intentional nonadherence. ReX is an innovative medication management system designed to address poor patient adherence and enhance patient engagement with their therapy. ReX controls and tracks pills from the point of packaging right through to the patient’s mouth. ReX generates robust, real-time adherence data. The system enables patients to report outcomes, complete surveys, and receive messages and instructions. ReX includes a reusable drug dispensing unit, disposable cassette containing pills, and a cloud-based data portal. OBJECTIVE We aimed to evaluate ReX feasibility by human factor studies including evaluation of ReX safety; ReX acceptance and usability; and ReX efficacy of providing pills according to a preprogrammed dose regimen, managing reminders and adherence data, and enhancing the adherence rate compared with the standard of care. METHODS The ReX system was evaluated in 2 human factor, nonclinical feasibility studies. Human subjects used ReX for the administration of pill-shaped Tic Tac sweets. The initial study evaluated ReX use and pill intake administration; second was a self-controlled, 4-day home-use study. All subjects took pills at home, according to a preprogrammed dose regimen, for 4 days each via the device (ReX test) or from standard packaging (control test). The adherence rate (percent of pills taken) was measured by the study subject’s report, remaining pills count, and ReX records (in the ReX test). ReX safety and usability were evaluated by a questionnaire filled out by the subject. RESULTS The initial feasibility study evaluated usability and acceptance of the ReX novel approach to pill dispensing. All subjects successfully managed 2 pill intakes. The ReX device was rated as easy to use by 81% (48/59) of subjects. The 4-day home-use study evaluated the safety, efficacy, and usability of the ReX system. No adverse event occurred; no pill overdose or pill malformation was reported. The overall adherence rate in the ReX test was 97.6% compared with 76.3% in the control test (P<.001). Real-time, personalized reminders provided in the event of a delay in pill intake contributed to 18.0% of doses taken during the ReX test. The ReX system was found easy to use by 87% (35/40) of subjects; 90% (36/40) felt comfortable using it for their medication. CONCLUSIONS ReX’s novel “tracking to the mouth” technology was found usable and accepted by subjects. The assessment of adherence rates was reliable; adherence of subjects to the dose regimen was significantly enhanced when using ReX compared with the standard of care.


Author(s):  
Qiyang Chen ◽  
Vinai Sharma

This paper discusses the issues of human factors that affect interface design. It addresses the challenges that system analysts may face. It presents the strategies of incorporating human factor engineering into the process of system analysis and design. The user performance and their mental models are also discussed.


Author(s):  
Danying Gu ◽  
Shuhui Zhang ◽  
Zhonghe Ning

The reviewing of operating experience at nuclear power plants (NPP) is not only critically important to safe and reliable operations, but also useful to guide the design of new plants which are similar to the current one under review. How to identify and analyze the safety-related operating experience and then implement a more extensive review is a vital and challengeable issue. In this paper, a methodology of human factor engineering (HFE) operating experience review (OER) is proposed for NPP. The need for the application of HFE in the life cycle activities of NPP and other nuclear facilities has been demonstrated by plant operating histories and regulatory and industry reviews. As a very important element of HFE, the OER is performed from the beginning of the design process. The main purpose of performing an OER is to verify that the applicant has identified and analyzed HFE-related safety problems and issues in previous designs that are similar to the current one. In this way, negative features associated with predecessor designs may be avoided in the current NPP design while retaining positive features. The research of OER concentrates on the aspect of review criterion, scope and implementation procedure of the HFE-related operating experience. As the NRC requirement, the scope of operating experience can be divided into six types in accordance with sources of information. The implementation procedures of USA and China are introduced, respectively. The resolution of HFE OER issues involve function allocation, changes in automation, HSI equipment design, procedures, training, and so forth. The OER conclusions can contribute to other HFE activities and improve the safety, reliability and usability of the HSI design in NPP.


Author(s):  
Antonio Roque ◽  
Douglas Stetson ◽  
Daniel J Hannon

We present a conceptual foundation and empirical framework for modeling cognitive complexity in cyber range event operating environments. Definitions of key concepts, such as cognitive complexity, task difficulty, and Blue Team cognitive workload, are informed by the literature of human factor engineering. This is followed by an approach to assessing cognitive complexity as experienced by a Blue Team in a given cyber range event operating environment, and a validation of that assessment method.


Sign in / Sign up

Export Citation Format

Share Document