Finite element analysis of thermal stresses in functionally graded cemented carbides

2010 ◽  
Vol 53 (4) ◽  
pp. 278-284 ◽  
Author(s):  
Z. Q. Huang ◽  
Y. H. He ◽  
P. L. Li
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Thermal Stresses ◽  
Functionally Graded ◽  
Cemented Carbides ◽  
Element Analysis

Natural frequency analysis of a functionally graded rotor-bearing system with a slant crack subjected to thermal gradients

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Arnab Bose ◽  
Prabhakar Sathujoda ◽  
Giacomo Canale
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Power Law ◽  
Beam Theory ◽  
Functionally Graded ◽  
Thermal Gradients ◽  
Element Analysis ◽  
Rotor Bearing ◽  
Natural Frequency Analysis ◽  
Bearing System

Abstract The present work aims to analyze the natural and whirl frequencies of a slant-cracked functionally graded rotor-bearing system using finite element analysis for the flexural vibrations. The functionally graded shaft is modelled using two nodded beam elements formulated using the Timoshenko beam theory. The flexibility matrix of a slant-cracked functionally graded shaft element has been derived using fracture mechanics concepts, which is further used to develop the stiffness matrix of a cracked element. Material properties are temperature and position-dependent and graded in a radial direction following power-law gradation. A Python code has been developed to carry out the complete finite element analysis to determine the Eigenvalues and Eigenvectors of a slant-cracked rotor subjected to different thermal gradients. The analysis investigates and further reveals significant effect of the power-law index and thermal gradients on the local flexibility coefficients of slant-cracked element and whirl natural frequencies of the cracked functionally graded rotor system.

Finite Element Analysis of Thermal Stresses in Circumferential Cast Clasps of Removable Partial Dentures

2007 ◽  
Vol 23 ◽  
pp. 229-232
Author(s):  
Liliana Sandu ◽  
Nicolae Faur ◽  
Cristina Bortun ◽  
Sorin Porojan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Thermal Stresses ◽  
Element Analysis ◽  
3 Dimensional ◽  
Thermal Changes ◽  
The Finite Element Analysis ◽  
Dimensional Finite Element ◽  
Back Action ◽  
Aggressive Effect

Several studies evaluated the removable partial dentures by the finite element analysis, but none of them evaluated thermal stresses. The purpose of the study was to explore the influence of thermal oral changes induced by hot/cold liquids and food on the circumferential cast clasps of removable partial dentures. A 3-dimensional finite element method was used to explore the temperature distribution, thermal stress and the influence of thermal changes on stresses and displacements of circumferential clasps during functions. Thermal variations induce stresses in dental clasps, high temperatures having a more aggressive effect than lower one. Cold liquids and food induce high stresses in the retentive clasp arms while hot ones in the occlusal rests of the clasps and for the back action clasp also in the minor connector. The study suggests the importance of consFigureidering thermal variations for stress analyses of the cast clasps.

Three Turnaround Heat Treating Studies

2003 ◽  
Author(s):  
Jaan Taagepera ◽  
Marty Clift ◽  
D. Mike DeHart ◽  
Keneth Marden
Keyword(s):  
Heat Treatment ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Thermal Stress ◽  
Thermal Stresses ◽  
Heat Treating ◽  
Element Analysis ◽  
Stress Profiles ◽  
Insight Into

Three vessel modifications requiring heat treatment were analyzed prior to and during a planned turnaround at a refinery. One was a thick nozzle that required weld build up. This nozzle had been in hydrogen service and required bake-out to reduce the potential for cracking during the weld build up. Finite element analysis was used to study the thermal stresses involved in the bake-out. Another heat treatment studied was a PWHT of a nozzle replacement. The heat treatment band and temperature were varied with location in order to minimize cost and reduction in remaining strength of the vessel. Again, FEA was used to provide insight into the thermal stress profiles during heat treatment. The fmal heat treatment study was for inserting a new nozzle in a 1-1/4Cr-1/2Mo reactor. While this material would ordinarily require PWHT, the alteration was proposed to be installed without PWHT. Though accepted by the Jurisdiction, this nozzle installation was ultimately cancelled.

Elastic Thermal Stresses in Bimetallic Pipe Welds

1980 ◽  
Vol 102 (4) ◽  
pp. 430-432 ◽  
Author(s):  
R. D. Blevins
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Intensity ◽  
Maximum Stress ◽  
Thermal Stresses ◽  
Simple Expression ◽  
Element Analysis ◽  
Maximum Stress Intensity ◽  
Bimetallic Pipe ◽  
Uniform Change

The elastic thermal stresses in a welded transition between two pipes of the same size but different alloys are explored. A stress-free temperature is postulated and the stress due to a uniform change in temperature is characterized by the maximum stress intensity in the weld. A simple expression for predicting this maximum stress intensity is developed based on the results of finite element analysis.

Thermal stresses in multilevel interconnections: Aluminum lines at different levels

1997 ◽  
Vol 12 (9) ◽  
pp. 2219-2222 ◽  
Author(s):  
Y-L. Shen
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Thermal Stresses ◽  
Element Analysis ◽  
Future Studies ◽  
Level Lines ◽  
The Finite Element Analysis ◽  
Staggered Arrangement ◽  
Upper Level ◽  
Different Levels

Numerical results on the evolution of thermal stresses in multilevel interconnects are presented. Two levels of aluminum lines with an aspect ratio of unity, aligned vertically or arranged in a staggered manner, are considered by recourse to the finite element analysis. The stresses are found to be significantly higher in the lower-level lines than in the upper-level lines, for both the aligned and staggered arrangements. The stress magnitudes are generally smaller in lines of staggered arrangement, compared to the case of aligned lines. Implications of the present findings are discussed, with directions of future studies highlighted.

Finite element analysis of flexible functionally graded beams with variable Poisson’s ratio

2016 ◽  
Vol 33 (8) ◽  
pp. 2421-2447 ◽  
Author(s):  
João Paulo Pascon
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Poisson’S Ratio ◽  
Scientific Literature ◽  
Functionally Graded ◽  
Poisson's Ratio ◽  
Transverse Strain ◽  
Thickness Direction ◽  
Element Analysis ◽  
Content Type

Purpose The purpose of this paper is to deal with large deformation analysis of plane beams composed of functionally graded (FG) elastic material with a variable Poisson’s ratio. Design/methodology/approach The material is assumed to be linear elastic, with a Poisson’s ratio varying according to a power law along the thickness direction. The finite element used is a plane beam of any-order of approximation along the axis, and with four transverse enrichment schemes, which can describe constant, linear, quadratic and cubic variation of the strain along the thickness direction. Regarding the constitutive law, five materials are adopted: two homogeneous limiting cases, and three intermediate FG cases. The effect of both finite element kinematics and distribution of Poisson’s ratio on the mechanical response of a cantilever is investigated. Findings In accordance with the scientific literature, the second scheme, in which the transverse strain is linearly variable, is sufficient for homogeneous long (or thin) beams under bending. However, for FG short (or moderate thick) beams, the third scheme, in which the transverse strain variation is quadratic, is needed for a reliable strain or stress distribution. Originality/value In the scientific literature, there are several studies regarding nonlinear analysis of functionally graded materials (FGMs) via finite elements, analysis of FGMs with constant Poisson’s ratio, and geometrically linear problems with gradually variable Poisson’s ratio. However, very few deal with finite element analysis of flexible beams with gradually variable Poisson’s ratio. In the present study, a reliable formulation for such beams is presented.

Comprehending Occurrence of Premature Failure in Compressor Turbine (CT) Blades for Short-Haul Aircraft Fleet

2019 ◽  
Vol 42 ◽  
pp. 10-23
Author(s):  
Joshua Kimtai Ngoret ◽  
Venkata Parasuram Kommula
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
Thermal Stresses ◽  
Geometrical Model ◽  
Mechanical Stresses ◽  
Element Analysis ◽  
Premature Failure ◽  
Structural Stresses ◽  
Transient Thermal

This paper presents results from modeling of Compressor Turbine (CT) blades for short-haul aircraft fleet occasioned by thermo-mechanical stresses in order to comprehend the occurrence of premature failure. A 3D PT6A-114A engine high pressure (HP) CT blade geometrical model was developed in commercial CAD-SolidWorks, then imported to ANSYS 15.0 environment for finite element analysis (FEA). The CT blade was investigated for transient thermal stresses from heat generated by the combustors and static structural stresses from rotational velocities of the engine which account for 80% of inertial field during flight. The results revealed that the blades could have served for another 1.44% of the time they were in service.

Sign in / Sign up

Export Citation Format

Share Document