Comprehending Occurrence of Premature Failure in Compressor Turbine (CT) Blades for Short-Haul Aircraft Fleet

2019 ◽  
Vol 42 ◽  
pp. 10-23
Author(s):  
Joshua Kimtai Ngoret ◽  
Venkata Parasuram Kommula
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
Thermal Stresses ◽  
Geometrical Model ◽  
Mechanical Stresses ◽  
Element Analysis ◽  
Premature Failure ◽  
Structural Stresses ◽  
Transient Thermal

This paper presents results from modeling of Compressor Turbine (CT) blades for short-haul aircraft fleet occasioned by thermo-mechanical stresses in order to comprehend the occurrence of premature failure. A 3D PT6A-114A engine high pressure (HP) CT blade geometrical model was developed in commercial CAD-SolidWorks, then imported to ANSYS 15.0 environment for finite element analysis (FEA). The CT blade was investigated for transient thermal stresses from heat generated by the combustors and static structural stresses from rotational velocities of the engine which account for 80% of inertial field during flight. The results revealed that the blades could have served for another 1.44% of the time they were in service.

Finite Element Analysis of Thermal Stresses in Circumferential Cast Clasps of Removable Partial Dentures

2007 ◽  
Vol 23 ◽  
pp. 229-232
Author(s):  
Liliana Sandu ◽  
Nicolae Faur ◽  
Cristina Bortun ◽  
Sorin Porojan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Thermal Stresses ◽  
Element Analysis ◽  
3 Dimensional ◽  
Thermal Changes ◽  
The Finite Element Analysis ◽  
Dimensional Finite Element ◽  
Back Action ◽  
Aggressive Effect

Several studies evaluated the removable partial dentures by the finite element analysis, but none of them evaluated thermal stresses. The purpose of the study was to explore the influence of thermal oral changes induced by hot/cold liquids and food on the circumferential cast clasps of removable partial dentures. A 3-dimensional finite element method was used to explore the temperature distribution, thermal stress and the influence of thermal changes on stresses and displacements of circumferential clasps during functions. Thermal variations induce stresses in dental clasps, high temperatures having a more aggressive effect than lower one. Cold liquids and food induce high stresses in the retentive clasp arms while hot ones in the occlusal rests of the clasps and for the back action clasp also in the minor connector. The study suggests the importance of consFigureidering thermal variations for stress analyses of the cast clasps.

Three Turnaround Heat Treating Studies

2003 ◽  
Author(s):  
Jaan Taagepera ◽  
Marty Clift ◽  
D. Mike DeHart ◽  
Keneth Marden
Keyword(s):  
Heat Treatment ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Thermal Stress ◽  
Thermal Stresses ◽  
Heat Treating ◽  
Element Analysis ◽  
Stress Profiles ◽  
Insight Into

Three vessel modifications requiring heat treatment were analyzed prior to and during a planned turnaround at a refinery. One was a thick nozzle that required weld build up. This nozzle had been in hydrogen service and required bake-out to reduce the potential for cracking during the weld build up. Finite element analysis was used to study the thermal stresses involved in the bake-out. Another heat treatment studied was a PWHT of a nozzle replacement. The heat treatment band and temperature were varied with location in order to minimize cost and reduction in remaining strength of the vessel. Again, FEA was used to provide insight into the thermal stress profiles during heat treatment. The fmal heat treatment study was for inserting a new nozzle in a 1-1/4Cr-1/2Mo reactor. While this material would ordinarily require PWHT, the alteration was proposed to be installed without PWHT. Though accepted by the Jurisdiction, this nozzle installation was ultimately cancelled.

Elastic Thermal Stresses in Bimetallic Pipe Welds

1980 ◽  
Vol 102 (4) ◽  
pp. 430-432 ◽  
Author(s):  
R. D. Blevins
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Intensity ◽  
Maximum Stress ◽  
Thermal Stresses ◽  
Simple Expression ◽  
Element Analysis ◽  
Maximum Stress Intensity ◽  
Bimetallic Pipe ◽  
Uniform Change

The elastic thermal stresses in a welded transition between two pipes of the same size but different alloys are explored. A stress-free temperature is postulated and the stress due to a uniform change in temperature is characterized by the maximum stress intensity in the weld. A simple expression for predicting this maximum stress intensity is developed based on the results of finite element analysis.

Thermal stresses in multilevel interconnections: Aluminum lines at different levels

1997 ◽  
Vol 12 (9) ◽  
pp. 2219-2222 ◽  
Author(s):  
Y-L. Shen
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Thermal Stresses ◽  
Element Analysis ◽  
Future Studies ◽  
Level Lines ◽  
The Finite Element Analysis ◽  
Staggered Arrangement ◽  
Upper Level ◽  
Different Levels

Numerical results on the evolution of thermal stresses in multilevel interconnects are presented. Two levels of aluminum lines with an aspect ratio of unity, aligned vertically or arranged in a staggered manner, are considered by recourse to the finite element analysis. The stresses are found to be significantly higher in the lower-level lines than in the upper-level lines, for both the aligned and staggered arrangements. The stress magnitudes are generally smaller in lines of staggered arrangement, compared to the case of aligned lines. Implications of the present findings are discussed, with directions of future studies highlighted.

CAD/CAE on the Mould Plates of Vertical Type High-Pressure Grouting Machine

2012 ◽  
Vol 538-541 ◽  
pp. 2681-2684
Author(s):  
Zhi Cheng Huang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
3D Model ◽  
Stress And Strain ◽  
Analysis Software ◽  
Element Analysis ◽  
Pressure Grouting ◽  
Object Of Study

Took a type of ceramics for daily use vertical type high pressure grouting machine as the object of study, study the stress and strain of its upper and lower mould plates. Established their 3D model by CAD software Pro-E, and then import them into finite element analysis software to analysis the value and distribution of the stress and strain. The analysis results can provide some reference for design, and have some engineering and practical value.

Investigation on stress distribution and pressure capacity of two-layer split high-pressure die based on finite element analysis

2019 ◽  
Vol 233 (14) ◽  
pp. 5048-5055
Author(s):  
Z Yi ◽  
WZ Fu ◽  
MZ Li
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
Stress State ◽  
Von Mises Stress ◽  
Stress Distributions ◽  
Element Analysis ◽  
Round Cylinder ◽  
Von Mises ◽  
Supporting Ring

In order to obtain a higher pressure capacity for the high-pressure die with a larger sample cavity, two types of two-layer split dies with a round cylinder and a quadrate cylinder were designed based on the conventional belt-type die. Finite element analysis was performed to investigate the stress distributions and pressure capacities of the high-pressure dies using a derived Mohr–Coulomb criterion and the von Mises criterion for the cylinder and supporting rings, respectively. As predicted by the finite element analysis results, in the two-layer split dies with a round cylinder, the stress state of the cylinder can be only slightly improved; and the von Mises stress of the first layer supporting ring can be hardly decreased. However, in the two-layer split dies with a quadrate cylinder and sample cavity, the stress state of the cylinder can be remarkably improved. Simultaneously, the von Mises stress of the supporting rings, especially for the first-layer supporting ring, can be also effectively decreased. The pressure capacities of the two-layer split dies with a round cylinder and a quadrate cylinder are 16.5% and 63.9% higher with respect to the conventional belt-type die.

Sign in / Sign up

Export Citation Format

Share Document