Comparison of Various Tissue-Preparation Techniques for Cryosectioning of Frozen Mouse Tissues

2009 ◽  
Vol 32 (4) ◽  
pp. 186-189 ◽  
Author(s):  
Lee Hui Ling ◽  
Susan Mary Rogers ◽  
Vanessa Tay ◽  
Gino V. Limmon ◽  
Zheng Dahai ◽  
...  
Keyword(s):  
Tissue Preparation ◽  
Mouse Tissues ◽  
Preparation Techniques

Rapid sample preparation for determination of iron in tissue by closed-vessel digestion and microwave energy.

1988 ◽  
Vol 34 (6) ◽  
pp. 1128-1130 ◽  
Author(s):  
D B Van Wyck ◽  
R B Schifman ◽  
J C Stivelman ◽  
J Ruiz ◽  
D Martin
Keyword(s):  
Bovine Liver ◽  
Dry Weight ◽  
Close Correlation ◽  
Microwave Energy ◽  
National Bureau ◽  
Tissue Preparation ◽  
Closed Vessel ◽  
Tissue Samples ◽  
Mouse Tissues ◽  
Analytical Recovery

Abstract We developed a rapid acid-digestion method for preparing tissue samples for iron determination. Specimens were digested in nitric acid and hydrogen peroxide under high temperature and pressure in closed Teflon vessels, with microwave energy. Analysis for iron in 25- to 250-mg portions of digested bovine liver powder (National Bureau of Standards Certified Reference Material no. 1577a) showed excellent linearity ([predicted] = 1.007[actual] - 0.166 micrograms per sample) and analytical recovery (98%). Precision (CV) was 5.4% when iron content was 10 micrograms per sample. Assaying split samples of mouse tissues, we found a close correlation between iron concentrations obtained with closed vs open vessels ([closed] = 0.878[open] + 68 micrograms/g, r = 0.994, range 400-4600 micrograms/g dry weight). In contrast to time-consuming conventional procedures for tissue dissolution, closed-vessel digestion with microwave energy dramatically shortens time for tissue preparation, minimizes use of caustic acid, reduces risk of sample loss or contamination, and yields accurate and reproducible results.

Localization of pancreatic enzymes in ultrathin frozen sections stained with metal labeled antibody

1978 ◽  
Vol 36 (2) ◽  
pp. 90-91
Author(s):  
Kenjiro Yasuda
Keyword(s):  
Fluorescent Antibody ◽  
Pancreatic Enzymes ◽  
Tissue Preparation ◽  
Zymogen Granules ◽  
Frozen Sections ◽  
En Bloc ◽  
Antibody Method ◽  
Ultrathin Frozen Sections ◽  
Fluorescent Antibody Method

Localization of amylase,chymotrypsinogen and trypsinogen in pancreas was demonstrated by Yasuda and Coons (1966), by using fluorescent antibody method. These enzymes were naturally found in the zymogen granules. Among them, amylase showed a diffuse localization around the nucleus, in addition to the zymogen granules. Using ferritin antibody method, scattered ferritin granules were also found around the Golgi area (Yasuda et al.,1967). The recent advance in the tissue preparation enables the antigen to be localized in the ultrathin frozen sections, by applying the labeled antibodies onto the sections instead of staining the tissue en bloc.The present study deals with the comparison of the localization of amylase and lipase demonstrated by applying the bismuth-labeled, peroxidase-labeled and ferritin-labeled antibody methods on the ultrathin frozen sections of pancreas, and on the blocks of the same tissue.

A Freeze Shadow Technique for the Preparation of Soft Paint Latexes for Electron Microscopy

1977 ◽  
Vol 35 ◽  
pp. 314-315
Author(s):  
Earl R. Walter ◽  
Glen H. Bryant
Keyword(s):  
Sample Preparation ◽  
High Vacuum ◽  
Vacuum System ◽  
Latex Particles ◽  
New Methods ◽  
Diffusion Pump ◽  
Film Forming ◽  
Routine Basis ◽  
Distribution Studies ◽  
Preparation Techniques

With the development of soft, film forming latexes for use in paints and other coatings applications, it became desirable to develop new methods of sample preparation for latex particle size distribution studies with the electron microscope. Conventional latex sample preparation techniques were inadequate due to the pronounced tendency of these new soft latex particles to distort, flatten and fuse on the substrate when they dried. In order to avoid these complications and obtain electron micrographs of undistorted latex particles of soft resins, a freeze-dry, cold shadowing technique was developed. The method has now been used in our laboratory on a routine basis for several years.The cold shadowing is done in a specially constructed vacuum system, having a conventional mechanical fore pump and oil diffusion pump supplying vacuum. The system incorporates bellows type high vacuum valves to permit a prepump cycle and opening of the shadowing chamber without shutting down the oil diffusion pump. A baffeled sorption trap isolates the shadowing chamber from the pumps.

The ionic strength dependence of chromatin folding

1978 ◽  
Vol 36 (2) ◽  
pp. 220-221
Author(s):  
F. Thoma ◽  
TH. Koller
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Ionic Strength ◽  
Specimen Preparation ◽  
Preparation Technique ◽  
Carbon Supports ◽  
Ionic Strength Dependence ◽  
Chromatin Folding ◽  
Strength Dependence ◽  
Preparation Techniques

Under a variety of electron microscope specimen preparation techniques different forms of chromatin appearance can be distinguished: beads-on-a-string, a 100 Å nucleofilament, a 250 Å fiber and a compact 300 to 500 Å fiber.Using a standardized specimen preparation technique we wanted to find out whether there is any relation between these different forms of chromatin or not. We show that with increasing ionic strength a chromatin fiber consisting of a row of nucleo- somes progressively folds up into a solenoid-like structure with a diameter of about 300 Å.For the preparation of chromatin for electron microscopy the avoidance of stretching artifacts during adsorption to the carbon supports is of utmost importance. The samples are fixed with 0.1% glutaraldehyde at 4°C for at least 12 hrs. The material was usually examined between 24 and 48 hrs after the onset of fixation.

Electron Microscopic Observation of Biological Specimens in Their Native State by Employing Cryogenic Techniques

1972 ◽  
Vol 30 ◽  
pp. 410-411 ◽  
Author(s):  
Tokio Nei ◽  
Haruo Yotsumoto ◽  
Yoichi Hasegawa ◽  
Yuji Nagasawa
Keyword(s):  
Electron Microscopic Observation ◽  
Surface Structures ◽  
Specimen Preparation ◽  
Native State ◽  
Electron Microscopic ◽  
Biological Specimen ◽  
Specimen Holder ◽  
Cold Stage ◽  
Preparation Techniques ◽  
Scanning Electron

In order to observe biological specimens in their native state, that is, still containing their water content, various methods of specimen preparation have been used, the principal two of which are the chamber method and the freeze method.Using its recently developed cold stage for installation in the pre-evacuation chamber of a scanning electron microscope, we have succeeded in directly observing a biological specimen in its frozen state without the need for such conventional specimen preparation techniques as drying and metallic vacuum evaporation. (Echlin, too, has reported on the observation of surface structures using the same freeze method.)In the experiment referred to herein, a small sliced specimen was place in the specimen holder. After it was rapidly frozen by freon cooled with liquid nitrogen, it was inserted into the cold stage of the specimen chamber.

High-Resolution Scanning Electron Microscopy of Biological Specimens

1988 ◽  
Vol 46 ◽  
pp. 186-187
Author(s):  
M. Müller ◽  
R. Hermann
Keyword(s):  
High Resolution ◽  
Freeze Drying ◽  
Room Temperature ◽  
Structural Information ◽  
Freeze Substitution ◽  
Critical Point Drying ◽  
Sem Study ◽  
Major Factors ◽  
Structural Preservation ◽  
Preparation Techniques

Three major factors must be concomitantly assessed in order to extract relevant structural information from the surface of biological material at high resolution (2-3nm).Procedures based on chemical fixation and dehydration in graded solvent series seem inappropriate when aiming for TEM-like resolution. Cells inevitably shrink up to 30-70% of their initial volume during gehydration; important surface components e.g. glycoproteins may be lost. These problems may be circumvented by preparation techniques based on cryofixation. Freezedrying and freeze-substitution followed by critical point drying yields improved structural preservation in TEM. An appropriate preservation of dimensional integrity may be achieved by freeze-drying at - 85° C. The sample shrinks and may partially collapse as it is warmed to room temperature for subsequent SEM study. Observations at low temperatures are therefore a necessary prerequisite for high fidelity SEM. Compromises however have been unavoidable up until now. Aldehyde prefixation is frequently needed prior to freeze drying, rendering the sample resistant to treatment with distilled water.

Sign in / Sign up

Export Citation Format

Share Document